Electrostatically Assisted Metal Foam Coarse Filter with Small Pressure Drop for Efficient Removal of Fine Particles: Effect of Filter Medium

Enze Tian,Jinhan Mo,Xiaofeng Li

DOI: https://doi.org/10.1016/j.buildenv.2018.08.026

IF: 7.093

2018-01-01

Building and Environment

Abstract:Traditionally preferred air filtration systems have a large pressure drop, and consequently use energy in building ventilation systems. This study developed an electrostatically assisted metal foam (EAMF) coarse filter. Comparing with electrostatic precipitator (ESP), in an EAMF coarse filter, charged particles go through rather than in parallel to the collecting electrodes and therefore are more likely to be removed from air flow as they are drawn closer to the collecting electrodes. We investigated the influences of material and pore density of metal foam on fraction filtration efficiency of 0.3-10 gm particles, net ozone production, pressure drop and power dissipation of the EAMF coarse filter. We used ambient aerosol in a ventilation duct to perform our experiments. Using 75 ppi nickel foam, the EAMF coarse filter can remove 0.3-0.5 mu m particles from ambient air with 78.9% filtration efficiency and 10.8 Pa pressure drop at 0.5 m/s face air velocity. We defined a structural coefficient N-s,N-E = a(1/3)/d(f)(2/3) to evaluate the theoretical filtration efficiency of the EAMF coarse filter. We proposed that metal foams whose oxide layers have smaller (h(o)/epsilon(r,o))aremore efficient in EAMF coarse filters. We also presented a comprehensive quality factor (CQF) to evaluate the performance of electrostatic particle removal technologies including our EAMF coarse filter.