Abstract:Abstract. Dismantling of reactor pressure vessels and their built-in components is an enormous challenge in the deconstruction of a nuclear power plant. Due to the years of exposure to neutron radiation, the activated components can only be dismantled and packaged remotely. For reasons of radiation protection, preference is given to techniques that can be used underwater due to the shielding effect. A cutting method that meets these requirements is the waterjet abrasive suspension cutting technique (WAS). The cutting tool is capable of slicing metallic internals and other materials using a pure jet of water mixed with an abrasive substance at high velocity and pressure. The process offers numerous technical advantages, but it has a major disadvantage in producing secondary waste. Due to the addition of the abrasive substance, the WAS process produces a waste mixture of inactive abrasive particles and radioactive steel particles (activated by neutron radiation) during the dismantling of steel components in nuclear facilities. Since the steel particles are radioactive when the reactor pressure vessel (RPV) and its internals are dismantled, this particle mixture currently has to be disposed of as radioactive waste. This leads to a doubling of the radioactive waste. Despite the technical advantages, the WAS process used for cutting purposes is a severely disadvantage from an economic point of view, considering the significant disposal costs of the radioactive waste. The research project NaMaSK (wet sieving and magnetic separation of grain mixtures to minimise secondary waste in the dismantling of nuclear facilities), funded by the German Federal Ministry of Education and Research (BMBF), aims to separate the two fractions (abrasive and steel particles) with the help of magnetic separation and wet sieving. For this purpose, a prototype separation system MaSK (magnetic separation of grain mixtures to minimise secondary waste in the dismantling of nuclear facilities) with a magnetic filter and sieve has already been built and tested, and it can separate up to 98 % of the steel particles from the mixture. The separation process aimed to reduce the total amount of secondary waste by reusing abrasive particles for further WAS cutting. In the new test plant NaMaSK, the mode of operation will be converted from a batch process to continuous operation to highlight the economic aspect of the separation process. In this regard, an efficient design of the sieve structure and magnetic filter, followed by process optimisation, will be implemented. These new developments and the first results will be presented at the conference.

Application of Plasma Arc Cutting Technology in Dismantling of Large Metal Components in Containment Building

Study of underwater plasma arc ignition and cutting process for surface nonconductive steel structures for offshore decommissioning

Study of Plasma Arc Underwater Penetration Processes in Steel Structures Covered with Non-conductive Materials

Bridging the Gap for Corona Plasma Applications : from Corona Characteristics, Chemical Kinetics to Pulsed Power Generator and Reactor

A State-of-the-Art Review of Radioactive Decontamination Technologies: Facing the Upcoming Wave of Decommissioning and Dismantling of Nuclear Facilities

Aerodynamic diameter and radioactivity distributions of radioactive aerosols from activated metals cutting for nuclear power plant decommissioning

Study of double-chamber air arc plasma torch and the application in solid-waste disposal

A review of pipe cutting, welding, and NDE technologies for use in fusion devices

Laser Cutting Technologies and Corresponding Pollution Control Strategy

A Comparative Study on Laser Cutting Performance with Varying Speeds at 10 M Underwater

Application of Non-Thermal Plasma Technology on Fugitive Methane Destruction: Configuration and Optimization of Double Dielectric Barrier Discharge Reactor

Development of Equipment and Technology for Precision Air-Plasma Cutting of Plate Steel

Overview of in-bore pipe cutting and welding tools for the maintenance of CFETR and EU-DEMO

Dismantling design for a reference research reactor of the WWR type

Research on water-air plasma cutting process of carbon steel

Review on the Research Progress of Arc Plasma Power Sources in China

An investigation of plasma-driven decomposition of per- and polyfluoroalkyl substances (PFAS) in raw contaminated ground water

The experimental analysis of the boric acid–based electric discharge machining

Wet sieving and magnetic separation for the treatment of radioactive secondary waste produced from waterjet abrasive suspension cutting

A New Waste Disposal Technology-plasma Arc Pyrolysis System

Aerosol, Gas, and Swarf Production during Underwater Cutting of Reactor Core Internals Using Electron Discharge Machining