Abstract:The main objective of this study is to predict the performance of an industrial‐scale (ID = 5.8 m) slurry bubble column reactor (SBCR) operating with iron‐based catalyst for Fischer–Tropsch (FT) synthesis, with emphasis on catalyst deactivation. To achieve this objective, a comprehensive reactor model, incorporating the hydrodynamic and mass‐transfer parameters (gas holdup, εG, Sauter‐mean diameter of gas bubbles, d32, and volumetric liquid‐side mass‐transfer coefficients, kLa), and FT as well as water gas shift reaction kinetics, was developed. The hydrodynamic and mass‐transfer parameters for He/N2 gaseous mixtures, as surrogates for H2/CO, were obtained in an actual molten FT reactor wax produced from the same reactor. The data were measured in a pilot‐scale (0.29 m) SBCR under different pressures (4–31 bar), temperatures (380–500 K), superficial gas velocities (0.1–0.3 m/s), and iron‐based catalyst concentrations (0–45 wt %). The data were modeled and predictive correlations were incorporated into the reactor model. The reactor model was then used to study the effects of catalyst concentration and reactor length‐to‐diameter ratio (L/D) on the water partial pressure, which is mainly responsible for iron catalyst deactivation, the H2 and CO conversions and the C5+ product yields. The modeling results of the industrial SBCR investigated in this study showed that (1) the water partial pressure should be maintained under 3 bars to minimize deactivation of the iron‐based catalyst used; (2) the catalyst concentration has much more impact on the gas holdup and reactor performance than the reactor height; and (3) the reactor should be operated in the kinetically controlled regime with an L/D of 4.48 and a catalyst concentration of 22 wt % to maximize C5+ products yield, while minimizing the iron catalyst deactivation. Under such conditions, the H2 and CO conversions were 49.4% and 69.3%, respectively, and the C5+ products yield was 435.6 ton/day. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3838–3857, 2015

Kinetic Modelling of the Aqueous-Phase Reforming of Fischer-Tropsch Water over Ceria-Zirconia Supported Nickel-Copper Catalyst

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Studies and Discriminations of the Kinetic Models for the Iron-Based Fischer−Tropsch Catalytic Reaction in a Recycle Slurry Reactor

Kinetics Modeling and Operating Conditions Optimization of Fischer-Tropsch Synthesis over Fe-based Catalysts

Experimental and kinetic modeling of Fischer–Tropsch synthesis over nano structure catalyst of Co–Ru/carbon nanotube

Assessing the Performance of an Industrial SBCR for Fischer–Tropsch Synthesis: Experimental and Modeling

Insights into behaviors of functional groups in biomass derived products during aqueous phase reforming over Ni/α-MoO 3 catalysts

Understanding the relationship between catalytic pyrolysis conditions and hydrogen production by aqueous phase reforming of the water-soluble fractions of bio-oils

Intrinsic kinetics of Fischer-Tropsch synthesis over Co/AC catalyst

Effect of reduction and reaction conditions on the catalytic performance of Co–Ni/Al2O3 catalyst in CO hydrogenation: modeling of surface reaction rate

Reaction Mechanism and Kinetic Modeling of Hydroisomerization and Hydroaromatization of Fluid Catalytic Cracking Naphtha

Design and Technoeconomic Analysis of Fischer–Tropsch Fixed‐Bed Synthesis with Cobalt‐Based Catalysts

Eight-lumped kinetic model for Fischer-Tropsch wax catalytic cracking and riser reactor simulation

Recent Mechanistic Understanding of Fischer-Tropsch Synthesis on Fe-Carbide

Nanostructured Catalyst for Fischer-Tropsch Synthesis: Nanostructured Catalyst for Fischer-Tropsch Synthesis

Simplified kinetic model for steam reforming of ethanol on a Ni/Al2O3 catalyst

Simulation and Analysis of a Tubular Fixed‐Bed Fischer‐Tropsch Synthesis Reactor with Co‐Based Catalyst

LHHW/RSM reaction rate modeling for Co-Mn/SiO2 nanocatalyst in Fishcher-Tropsch synthesis

Fischer–Tropsch Synthesis: Computational Sensitivity Modeling for Series of Cobalt Catalysts

Aqueous Phase Fischer–Tropsch Synthesis in a Continuous Flow Reactor