Abstract:For axial turbines, tip leakage vortex and passage vortex flow are responsible for a large part of the aerodynamic loss. To pursue higher turbine efficiency, many methods are undertaken to eliminate the tip leakage loss. In this work, by experimental and numerical methods, novel wave-shaped tip-shroud contours on the unshrouded turbine cascade were proposed. In a low-speed large-scale linear turbine cascade facility, a traditional flat tip was first conducted to comprehensively validate the numerical tool, especially the inlet conditions and the total pressure loss due to the tip leakage loss. The numerical settings were kept the same as the experimental facility. It achieved a satisfactory agreement between the CFD and experiments. It was found that in a flat tip case, a large, integral tip leakage vortex structure was identified and responded to the aerodynamic loss within the tip leakage core. Then a series of novel wave-shaped tip-shroud contours were considered in the current turbine cascade. The overtip flow exited the suction side tip gap, and the peak mass flow rate was concentrated around the troughs of the wave tip. Several small-sized, but stronger-vorticity-magnitude vortex structures were identified. By breaking down a large, integral vortex structure into several smaller-scale vortices, the vortex evolution was beneficial for the turbine efficiency. Although a slight enhancement of passage vortex was identified, the overall loss reduction of 3.0% was achieved by reducing the tip leakage loss, which dominated the loss contribution. According to the real working condition, axial displacement for the blade was considered. Within the current scope, the maximum reduction of tip leakage loss coefficient was reduced by 14.6% compared to the flat tip case. It was mainly contributed by the smaller contraction coefficient within the tip gap, which reduced the overtip leakage mass flow. Meanwhile, the vena contracta within the tip gap was altered, as well as static pressure distribution on the tip surface. As a result, the minimum static pressure was re-distributed at the throat of the tip gap. It was proven that this novel wave-shaped tip-shroud contour was an efficient way to improve the aerodynamic performance at a larger tip gap.(c) 2022 Elsevier Ltd. All rights reserved.

A Comparison of Tip Gap Loss Sensitivity for Shrouded vs. Unshrouded Turbine Rotors

Comparative investigation of tip leakage flow and its effect on stage performance in shrouded and unshrouded turbines

Transonic Turbine Blade Tip Aero-Thermal Performance With Different Tip Gaps: Part Ii-Tip Aerodynamic Loss

Experimental Investigation of Aerodynamic Performance due to Blade Tip Clearance in a Gas Turbine Rotor Cascade

Numerical Investigation of Thermal Performance of Unshrouded HP Turbine Blade Tips

Computational Study Of The Thermal Performance Of An Unshrouded High Pressure Turbine Blade Tip

Tip Leakage Flow In Radial Inflow Rotor Of A Microturbine With Varying Blade-Shroud Clearance

Aerothermal Performance Of Shroudless Turbine Blade Tips With Effects Of Relative Casing Motion

Effect Of Relative Movement Between The Shroud And Blade On Tip Leakage Flow Characteristics

EFFECT OF TIP CLEARANCE HEIGHT ON TIP CLEARANCE FLOW IN TURBINE ROTORS

Numerical Research On Effects Of Shroud Contraction On Tip Leakage Flow And Overall Performance Of Axial Compressors

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

A comprehensive CFD investigation of tip vortex trajectory in shrouded wind turbines using compressible RANS solver

Novel Wave-Shaped Tip-Shroud Contours Towards Reducing Turbine Leakage Loss

Unsteady Aerodynamics Of A Flat Tip And A Winglet Tip In A High-Pressure Turbine

Investigation on the Interaction of Tip Leakage Flow/ Shock Wave/ Boundary Layer in a Transonic Compressor Stage

Numerical Investigations on the Blade Tip Clearance Excitation Forces in an Unshrouded Turbine

Comparisons of blade tip phantom cooling effectiveness for two tip structures with three tip clearances

Influence of Tip Clearance Size on Flow Characteristics of a Vaneless Counter-Rotating Turbine

Influences of a Multi-Cavity Tip on the Blade Tip and the over Tip Casing Aerothermal Performance in a High Pressure Turbine Cascade

Tip Leakage Flow And Heat Transfer Predictions For Turbine Blades