Abstract:For axial turbines, tip leakage vortex and passage vortex flow are responsible for a large part of the aerodynamic loss. To pursue higher turbine efficiency, many methods are undertaken to eliminate the tip leakage loss. In this work, by experimental and numerical methods, novel wave-shaped tip-shroud contours on the unshrouded turbine cascade were proposed. In a low-speed large-scale linear turbine cascade facility, a traditional flat tip was first conducted to comprehensively validate the numerical tool, especially the inlet conditions and the total pressure loss due to the tip leakage loss. The numerical settings were kept the same as the experimental facility. It achieved a satisfactory agreement between the CFD and experiments. It was found that in a flat tip case, a large, integral tip leakage vortex structure was identified and responded to the aerodynamic loss within the tip leakage core. Then a series of novel wave-shaped tip-shroud contours were considered in the current turbine cascade. The overtip flow exited the suction side tip gap, and the peak mass flow rate was concentrated around the troughs of the wave tip. Several small-sized, but stronger-vorticity-magnitude vortex structures were identified. By breaking down a large, integral vortex structure into several smaller-scale vortices, the vortex evolution was beneficial for the turbine efficiency. Although a slight enhancement of passage vortex was identified, the overall loss reduction of 3.0% was achieved by reducing the tip leakage loss, which dominated the loss contribution. According to the real working condition, axial displacement for the blade was considered. Within the current scope, the maximum reduction of tip leakage loss coefficient was reduced by 14.6% compared to the flat tip case. It was mainly contributed by the smaller contraction coefficient within the tip gap, which reduced the overtip leakage mass flow. Meanwhile, the vena contracta within the tip gap was altered, as well as static pressure distribution on the tip surface. As a result, the minimum static pressure was re-distributed at the throat of the tip gap. It was proven that this novel wave-shaped tip-shroud contour was an efficient way to improve the aerodynamic performance at a larger tip gap.(c) 2022 Elsevier Ltd. All rights reserved.

Performance Analysis of A Small Turbine with Different Shroud Seal

Comparative investigation of tip leakage flow and its effect on stage performance in shrouded and unshrouded turbines

Numerical investigations on leakage performance and flow mechanism of spiral groove seal for shrouded blade in axial turbine

Novel Wave-Shaped Tip-Shroud Contours Towards Reducing Turbine Leakage Loss

Computational Study Of The Thermal Performance Of An Unshrouded High Pressure Turbine Blade Tip

Numerical Investigation of Thermal Performance of Unshrouded HP Turbine Blade Tips

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Numerical Research On Effects Of Shroud Contraction On Tip Leakage Flow And Overall Performance Of Axial Compressors

Effect of Winglet-Shroud Tip With Labyrinth Seals on Aerodynamic Performance of a Linear Turbine Cascade

Film Cooling and Aerodynamic Performance on Multi-Cavity Squealer Tip of a Turbine Blade

Numerical study on effect of design parameters of the single-circumferential groove on tip leakage flow reduction in a transonic turbine

Influence of T-shape Tip Clearance on Performance of a Mixed-Flow Pump

Effects of the casing step size on the tip leakage flow pattern and heat transfer characteristic of turbine blade squealer tip

Experimental and numerical investigations of tip clearance flow and loss in a variable geometry turbine cascade

A Comparison of Tip Gap Loss Sensitivity for Shrouded vs. Unshrouded Turbine Rotors

Effects of Squealer Tip Geometry Deviation on Flow Field and Aerodynamic Performance Using Uncertainty Quantification Method and Sensitivity Analysis Method

Numerical investigation of the effect of T-shaped blade on the energy performance improvement of a semi-open centrifugal pump

The Tip Leakage Flow of an Unshrouded High Pressure Turbine Blade with Tip Cooling

Performance analysis of a new type of space guide vane for T-type hydraulic turbine

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

Aerodynamic Investigation on Retrofit for Turbine of a Turbo-Shaft Engine