Abstract:This study introduces a multidisciplinary design methodology tailored for enhancing the performance of cooled turbine blades by amalgamating thermal and aerodynamic calculation modules. The approach is unique in terms of its integration of a multi-objective optimization platform, aimed at refining aerodynamic performance and gauging the heat transfer capabilities during the preliminary aerodynamic design phase. To accomplish this objective, a one-dimensional pipe-network calculation tool was incorporated into the thermal module to quickly evaluate the heat transfer performance of the blades under different conditions. This tool also provides more realistic film hole inlet boundary conditions essential for three-dimensional aerodynamic calculations. Implementing this platform in optimizing a high-pressure turbine blade revealed a Pareto-optimal front, comprising −η1 and η2 (representing optimization objectives for aerodynamic and heat transfer performance, respectively), showcasing a constrained relationship. Upon scrutinizing three optimization cases against the prototype, optimization case 1 demonstrates the most significant enhancements in aerodynamic performance, showing a 0.2015% improvement in aerodynamic efficiency relative to the prototype. Conversely, optimization case 3 displays a comparatively modest augmentation in aerodynamic performance but excels notably in heat transfer performance, showcasing a 7.61% reduction in the maximum temperature of the blade surface compared to the prototype. Through adept optimization strategies and meticulous variable selection, we maintained a relatively stable mainstream mass flow across the optimization cases (less than 0.05% variation). These findings underscore the efficacy of our multidisciplinary design approach for cooled turbine blades, promising efficiency improvements in current design practices and potential reductions in project duration.

Aerodynamic Investigation on Retrofit for Turbine of a Turbo-Shaft Engine

Optimization Design of a Turbine Blade to Reduce Secondary Flow Loss Using a Viscous Adjoint Method

Investigation on the Performance of the Gas Turbine of a Turboshaft Engine

Aerodynamic Performance Analysis of a Novel Geometry-variable Turbine Guide Vane with a Fixed Angle of Attack

Design and Analysis of a Turboshaft Engine Turbine

OPTIMIZATION DESIGN FOR THE TURBINE TRANSITION SECTION OF AN AEROENGINE

AN INVESTIGATION ON AERODYNAMIC PERFORMANCE OF A VANELESS COUNTER-ROTATING TURBINE WITH RECESSED HIGH-PRESSURE ROTOR TIPS

A cooled turbine blade design and optimization method considering the cooling structure influence

Aerodynamic performance measurement of a novel variable geometry turbine adjustable guide vane scheme by experimental study

Comparative Experimental Investigation On Aerodynamic Performance Of A Steam Turbine Cascades, Part Ii - Stator Vanes

Study on Aerodynamic Performance and Optimization Design of a Turbine in Liquid Rocket Engine

Numerical Investigation for Curved Guide Vane in Gas Turbine

Numerical Study on Nozzle Exit Flow Angle for Radial Turbine

Performance Test of Radial-inward Turbine in Microturbine

Numerical Investigation And Shape Design Improvement Of A Turbine Inlet Combined Valve

Designing Overview and Flow Field Analysis of an Air-Cooled Counter-Rotating Turbine

Performance Calculation Of A Three-Shaft Gas Turbine: Experiment Evaluation And Analysis

Computational investigation of the aerodynamics of automotive turbocharger mixed-flow turbines

Comparison of Turbine Low Pressure Guide Vane before and After Optimization

Aerodynamic and Heat Transfer Optimization of One Stage Air-Cooled Turbine

Three-dimensional Numerical Investigation of Vaneless Counter-Rotating Turbine