Abstract:Over the last 20 years, flue gas desulfurization gypsum (FGD gypsum) has become a valuable and widely used substitute for a natural raw material to produce plasters, mortars, and many other construction products. The essential advantages of FGD gypsum include its high purity and stability, which allow for better technical parameters compared to natural gypsum, and, until recently, its low price and easy availability. This FGD gypsum is obtained in the process of desulfurization of flue gases and waste gases in power plants, thermal power plants, refineries, etc., using fossil fuels such as coal or oil. The gradual reduction in energy production from fossil raw materials implemented by European Union countries until its complete cessation in 2049 in favor of renewable energy sources significantly affects the availability of synthetic gypsum, and forces producers of mortars and other construction products to look for new solutions. The gypsum content in commonly used light plaster mortars is usually from 50 to 60% by mass. This work presents the results of tests on mortars wherein the authors reduced the amount of gypsum to 30%, and, to meet the strength requirements specified in the EN 13279-1:2008 standard, added Portland cement in the amount of 6–12% by mass. Such a significant reduction in the content of synthetic gypsum will reduce this raw material's consumption, thus extending its availability and developing other solutions. The study presented the test results on strength, density, porosity, pore size distribution, and changes in the microstructure of mortars during up to 180 days of maturation in conditions of increased relative humidity. The results show that decreased porosity and increased mechanical strength occur due to the densification of the microstructure caused by the formation of hydration products, such as C-S-H, ettringite, and thaumasite.

Study on the Thermal Expansion Performance of Gypsum in the Application of Precision Casting

Effect of Bauxite/gypsum on Setting Time of the Grouting Material

Preparation and Properties of Expanded Vermiculite/Gypsum Thermal Insulation Boards

Effects of Boehmite on the Calcination Shrinkage and Mechanical Properties of Gypsum‐Bonded Molds

Investigation of physical and mechanical properties of mixed gypsum material for slip casting molds

Study on Preparation of High-Strength Gypsum by FGD Gypsum

Study on the influence mechanism of flue gas desulphurisation gypsum on solid waste-based geopolymer grouting materials

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

The Influence of Rheology for Different Superplasticizer on High Alumina Low Cement Castable

Gypsum hemihydrate–cement blends to improve renderings durability

Performance Study and Multi-Index Synergistic Effect Analysis of Phosphogypsum-Based Composite Cementitious Material

Study on physical and chemical characteristics of β-hemihydrate phosphogypsum

Influence of crystal-transforming agent on the performance and mechanism of α-high-strength gypsum prepared from FGD gypsum

Preparation and Performance Study of Alkali-active Gypsum Mixture System

Physicomechanical Properties of Gypsum with Mineral Additions at Elevated Temperatures

Use of recycled gypsum in the cement-based stabilization of very soft clays and its micro-mechanism

Effect of sodium sulfate and gypsum on performances of expansive grouting material with aluminum as expansion agent

A Study of the Influence of Cement Addition and Humidity on the Mechanical Strength and Microstructure of Flue Gas Desulfurization Gypsum–Cement Plasters

Optimization of mechanical properties and water absorption behavior of building gypsum by ternary matrix mixture

Influencing factors of mechanical and thermal conductivity of foamed phosphogypsum-based composite cementitious materials