Abstract:Given the issues related to poor hydration activity, long setting time and low early strength of industrial by-product fluorogypsum (FG), the composite modifiers (Na 2 SO 4 and NaNO 2 ) were utilized to enhance its reactivity. The investigation of the mechanism involved the utilization of contemporary analytical methods, including X-ray diffraction (XRD), 1 H low-field nuclear magnetic resonance (NMR), and Scanning electron microscope and Energy Dispersive Spectrometer (SEM-EDS). The results demonstrated that the incorporation of modifiers significantly enhanced both the hydration rate and activity of fluorogypsum. The optimum concentration of the composite modifier was found to be 1.5 wt% Na 2 SO 4 and 0.5 wt% NaNO 2 . The addition of modifiers (1.5 wt% Na 2 SO 4 and 0.5 wt% NaNO 2 ) significantly shortens the setting time of FG paste, reducing it by approximately 500 min compared to the control sample. After 28 days of curing, the flexural strength and compressive strength of the fluorogypsum sample containing modifiers (1.5 wt% Na 2 SO 4 and 0.5 wt% NaNO 2 ) increased by 55.5 % (reaching 4.2 MPa) and 31.5 % (reaching 37.6 MPa), respectively. The modifiers facilitate the transformation from anhydrite (CaSO 4 , AH) to dihydrate gypsum (CaSO 4 ·2H 2 O, DH). Both NaNO 2 and Na 2 SO 4 alter the growth rates of different crystal axes during DH crystal growth, transforming them into prismatic and needle-shaped DH. The prismatic and needle-shaped DH crystals were arranged in layers, resulting in a compact structure with low hole content and few pores, which led to increased density of the hardened paste and higher strength. The current study provides evidence that the inclusion of composite modifiers greatly improves the activity of FG, making it more efficient in the field of building materials.

Influence of crystal-transforming agent on the performance and mechanism of α-high-strength gypsum prepared from FGD gypsum

Influence of crystal modifier on the preparation of α-hemihydrate gypsum from phosphogypsum

Effect of modifiers on crystalizing habit and mechanical strength of α-hemihydrate gypsum prepared from PG by an autoclaved method

Effects of glutaric acid, tricarballylic acid and citric acid on the morphology of α-hemihydrate gypsum: Experimental and DFT simulation studies

Effect of sodium fluoride on the crystal regulation of high-strength α-hemihydrate gypsum from calcium sulphate dihydrate and phosphogypsum

Study on Preparation of High-Strength Gypsum by FGD Gypsum

Effect Of Potassium Sodium Tartrate And Sodium Citrate On The Preparation Of Alpha-Calcium Sulfate Hemihydrate From Flue Gas Desulfurization Gypsum In A Concentrated Electrolyte Solution

Effect of Al2(SO4)3 Additive on the Properties of Calcined Gypsum Prepared from Flue Gas Desulfurization

Retarding effect of impurities on the transformation kinetics of FGD gypsum to α-calcium sulfate hemihydrate under atmospheric and hydrothermal conditions

Trace NaCl and Na2EDTA Mediated Synthesis of Α-Calcium Sulfate Hemihydrate in Glycerol–Water Solution

Coordinated disposal of FGD gypsum and power plant concentrated brine via preparation of α-hemihydrate gypsum

Preparation of high-performance building gypsum by calcining FGD gypsum adding CaO as crystal modifier

Experimental Study and Mechanism Analysis of Preparation of α-Calcium Sulfate Hemihydrate from FGD Gypsum with Dynamic Method

Facile preparation of high-strength α-CaSO4·0.5H2O regulated by maleic acid from phosphogypsum: experimental and molecular dynamics simulation studies

Performance improvement and mechanism of model-gypsum by aluminate cement

Study on activation of fluorogypsum by sodium sulfate and sodium nitrite

Study on Medium Crystal Agent in Preparation ofα-High Strength Gypsum with Phosphogypsum

Preparation and Performance Study of Alkali-active Gypsum Mixture System

Impact of carboxylic acid structure on α-hemihydrate gypsum crystal morphology and mechanical strength