Abstract:In ocean engineering, interactions between ocean currents and risers lead to regular vortex shedding on both sides of the riser, causing structural deformation. When the frequency of vortex shedding approaches the natural frequency of the structure, resonance occurs, significantly increasing deformation. This phenomenon is a critical cause of riser failure. Therefore, the dynamic response of flexible risers to vortex-induced vibrations (VIV) is crucial for their structural safety. This paper employs the finite-volume method to integrate over control volumes to solve for forces, such as pressure and shear stress, on the surface of the riser, while the finite-element method discretizes the continuous structural body into elements and nodes to solve for structural displacements and stresses. A strongly coupled method is utilized at each timestep to iteratively transfer load-displacement data between the fluid and structural fields, updating the boundary conditions of the fluid domain to achieve a bidirectional fluid–structure interaction simulation of vortex-induced vibrations in a seawater environment for flexible risers. The study finds that the three-dimensional flexible riser exhibits multi-frequency vibration phenomena and broadband vibration response characteristics under high flow velocity conditions. As the flow velocity increases, the vortex-shedding mode is observed to transition from the simple two single (2S) mode to the more complex pair + single (P + S) and two pair (2P) modes. In addition, the stiffness at the ends is enhanced by the fixed boundary conditions, and the coupling between the natural frequency of the ends and the vortex-shedding frequency triggers complex vortex-shedding phenomena in these regions. At higher flow velocities, these boundary effects result in more complex vortex-shedding modes and stronger vibration responses at both ends of the riser.

Evaluation of Contact Forces in the Vertical Connection of a Flexible Riser in the Subsea Equipment

Dynamic Analysis of the Umbilical Cable Pull-in Operation Through J-tube under Different Wave Directions

Numerical Simulation on Dynamic Behaviour of Deepwater J-lay Systems

Interaction between catenary riser and soft seabed: Large-scale indoor tests

A Coupled, Global/Local Finite Element Methodology to Evaluate the Fatigue Life of Flexible Risers Attached to Floating Platforms for Deepwater Offshore Oil Production

On the Natural Keulegan–Carpenter Number for Subsea Industrial Modulus Installation

Flexible Riser Top Connection Analysis With I-Tube Interface And Bending Hysteresis Effect

Integrated Numerical Investigation of a 15 MW Semi-Submersible Wind Turbine at Moderate Water Depth

3D Mechanical Analysis of Subsea Manifold Installation by Drill Pipe in Deep Water

Experimental investigation on vortex-induced vibration characteristics of a segmented free-hanging flexible riser

Numerical analysis of vortex-induced vibration on a flexible cantilever riser for deep-sea mining system

Analysis of the bending performance of unbonded flexible risers

A Finite Element Analysis for Unbonded Flexible Risers under Bending Loads

Safety Assessment Study of a Planned Offshore Floating Platform Pipelaying Test

Flexibility Investigation of a Marine Riser System Based on an Accurate and Efficient Modelling and Flexible Multibody Dynamics

Numerical Study of Vortex-Induced Vibration Characteristics of a Long Flexible Marine Riser

Theoretical and Numerical Methods to Predict the Behaviour of Unbonded Flexible Riser with Composite Armour Layers Subjected to Axial Tension

Development of Dynamics Model of Seafloor Mining System and Analysis of Influence Factors in the Deploying Process

Flexible Riser Tensile Armour Stress Assessment in the Bend Stiffener Region

Study on Free-Standing Riser Under Different Working Conditions Based on 3D Co-Rotational Beam Element

A Numerical Study on the Vortex-Induced Vibration of Flexible Cylinders Covered with Differently Placed Buoyancy Modules