Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

Interaction between catenary riser and soft seabed: Large-scale indoor tests

Lateral Cyclic Interaction Between Catenary Riser and Soft Seabed

IMPROVED EMPIRICAL FORMULATION FOR SEABED TRENCH PROFILE AT TOUCHDOWN ZONE AND ITS EFFECTS ON FATIGUE OF STEEL CATENARY RISERS

Numerical Simulation on Dynamic Behaviour of Deepwater J-lay Systems

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Responses of different nonlinear pipe-soil interaction models in dynamic cycling of riser in the touchdown zone

Numerical Modelling of Pipe-Soil Interaction for Marine Pipelines in Sandy Seabed Subjected to Wave Loadings

Influences of Pipelay Parameters on Dynamic Behavior of Deepwater J-Lay System

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

Numerical Modeling Approach for Steel Catenary Riser Behavior at Touchdown Zone

Fatigue Failure Analysis and Simulation Calculation of Submarine Suspended Pipelines

Three-dimensional trenches induced by lateral riser-soil interaction and their influence on the behavior of SCR

Dynamic analysis of steel catenary riser on the nonlinear seabed using vector form intrinsic finite element method

Seabed trench formation and its impact on fatigue life of steel catenary risers in touchdown area

Safety assessment on big flexible pipe installation under sea

Fatigue analysis of a steel catenary riser at touchdown zone with seabed resistance and hydrodynamic forces

Model Tests on Installation Techniques of Suction Caissons in A Soft Clay Seabed

Configuration Analysis of Deepwater S-Lay Pipeline

Configuration of Submarine Pipeline for Deepwater S-lay Technique