Abstract:In ocean engineering, interactions between ocean currents and risers lead to regular vortex shedding on both sides of the riser, causing structural deformation. When the frequency of vortex shedding approaches the natural frequency of the structure, resonance occurs, significantly increasing deformation. This phenomenon is a critical cause of riser failure. Therefore, the dynamic response of flexible risers to vortex-induced vibrations (VIV) is crucial for their structural safety. This paper employs the finite-volume method to integrate over control volumes to solve for forces, such as pressure and shear stress, on the surface of the riser, while the finite-element method discretizes the continuous structural body into elements and nodes to solve for structural displacements and stresses. A strongly coupled method is utilized at each timestep to iteratively transfer load-displacement data between the fluid and structural fields, updating the boundary conditions of the fluid domain to achieve a bidirectional fluid–structure interaction simulation of vortex-induced vibrations in a seawater environment for flexible risers. The study finds that the three-dimensional flexible riser exhibits multi-frequency vibration phenomena and broadband vibration response characteristics under high flow velocity conditions. As the flow velocity increases, the vortex-shedding mode is observed to transition from the simple two single (2S) mode to the more complex pair + single (P + S) and two pair (2P) modes. In addition, the stiffness at the ends is enhanced by the fixed boundary conditions, and the coupling between the natural frequency of the ends and the vortex-shedding frequency triggers complex vortex-shedding phenomena in these regions. At higher flow velocities, these boundary effects result in more complex vortex-shedding modes and stronger vibration responses at both ends of the riser.

Flexibility Investigation of a Marine Riser System Based on an Accurate and Efficient Modelling and Flexible Multibody Dynamics

Dynamic Response of DP Offshore Platform-Riser Multi-Body System Based on UKF-PID Control

Rigid-flexible coupling dynamics and characteristics of marine excavator’s mechanical arm

Nonlinear dynamic optimization of marine riser system anti-recoil under a flexible multibody framework

Dynamic Analysis of A Deepwater Drilling Riser with A New Hang-off System

Mathematical Modelling and Dynamic Analysis of an Offshore Drilling Riser

Study on Free-Standing Riser Under Different Working Conditions Based on 3D Co-Rotational Beam Element

Numerical evaluation of the coupled/uncoupled effects of lower marine riser package and/or blowout preventer with a lower flex joint in a hang-off drilling riser

Numerical analysis of configuration for steel lazy-wave riser in deepwater

Numerical solutions for nonlinear large deformation behaviour of deepwater steel lazy-wave riser

Dynamic analysis of the subsea production system with lazy-wave risers attached to FPSO

Mechanical analysis of deepwater drilling riser system based on multibody system dynamics

Dynamic Analysis of Unbonded Flexible Pipe with Bend Stiffener Constraint and Bending Hysteretic Behavior

An optimised equivalent modelling approach for LMRP/BOPs in the global dynamic analysis of deepwater risers

Parametric analysis for free standing riser by a new calculation procedure

Axial Tensile Ultimate Strength of an Unbonded Flexible Riser Based on a Numerical Method

Development of Dynamics Model of Seafloor Mining System and Analysis of Influence Factors in the Deploying Process

Cross-sectional mechanical characteristics and sensitivity analysis of unbonded flexible risers under axial loads

Numerical Study of Vortex-Induced Vibration Characteristics of a Long Flexible Marine Riser

Dynamic analysis of steel catenary riser on the nonlinear seabed using vector form intrinsic finite element method

Flexible Riser Top Connection Analysis With I-Tube Interface And Bending Hysteresis Effect