Effects of Zr doping to improve ionic conductivity and lithium-diffusion kinetics of β-LiVOPO4 cathode material

Da-Jeong Park,Rajesh Rajagopal,Kwang-Sun Ryu

DOI: https://doi.org/10.1016/j.jiec.2019.11.036

IF: 6.76

2020-03-01

Journal of Industrial and Engineering Chemistry

Abstract:We tried to improve the ionic conductivity, lithium-ion diffusion, and cycle capacity of pure β-LiVOPO4 cathode material by Zr doping. Pure and Zr-doped β-LiVOPO4 cathode material was synthesized by a low-temperature sol–gel process. The physiochemical properties of the synthesized materials were analyzed by various characterization techniques. The Zr doping of the β-LiVOPO4 was confirmed by ex situ XANES analysis. The electrochemical behavior of the synthesized material was studied by various electrochemical analyses. The lithium-diffusion coefficient values of pristine and selected Zr-doped β-LiVOPO4 cathode materials were studied and compared using SSCV, EIS, and PITT at different voltages. The calculated values of the diffusion coefficients obtained from CV and EIS are in the range of 10−14–10−13 cm2/s. The PITT measurement gives the values of 10−12–10−11  cm2/s. All techniques indicated that x = 0.03 Zr-doped samples obtained the improved the lithium diffusion coefficient values.

engineering, chemical,chemistry, multidisciplinary

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the ionic conductivity, lithium - ion diffusion kinetics and cycling capacity of β - LiVOPO₄ cathode materials through zirconium (Zr) doping. Specifically, as a potential cathode material for lithium - ion batteries, β - LiVOPO₄ has a relatively high working voltage and theoretical capacity, but its inherent low conductivity and poor cycling stability limit its practical applications. Therefore, researchers attempt to overcome these shortcomings and improve the electrochemical performance of the material through Zr doping.

### Background of the Paper and Problem Description
1. **Material Properties**
- β - LiVOPO₄ is a potential cathode material for lithium - ion batteries, with a working voltage of about 4.0 V and a theoretical capacity of 166 mAh/g.
- However, it has a low inherent conductivity (10⁻⁸ S/cm) and poor cycling stability.

2. **Structural Features**
- β - LiVOPO₄ has an orthorhombic crystal structure with a space group of Pnma, consisting of infinite chain - like VO₆ octahedra arranged along the a - axis and PO₄ tetrahedra connected by corner - sharing.
- This structure limits the one - dimensional diffusion path of lithium ions, affecting the cycle retention rate and rate performance.

3. **Existing Solutions**
- To improve conductivity, many studies have been carried out, such as composite metal oxides, three - dimensional porous materials and substitution of transition metal sites.
- However, research on significantly improving the ionic conductivity of β - LiVOPO₄ is still insufficient, and there are few reports on the lithium - ion diffusion coefficient.

### Objectives of the Paper
- **Improve Conductivity**: Increase the ionic conductivity of β - LiVOPO₄ through Zr doping.
- **Improve Lithium - Ion Diffusion**: Increase the lithium - ion diffusion coefficient through Zr doping.
- **Enhance Cycling Performance**: Improve the cycling stability and rate performance of the material through Zr doping.

### Experimental Methods
- **Material Synthesis**: Pure β - LiVOPO₄ and β - LiV₁₋ₓZrₓOPO₄ (x = 0.01, 0.03, 0.05) with different Zr doping ratios were prepared by the low - temperature sol - gel method.
- **Characterization Techniques**: Materials were characterized using techniques such as X - ray diffraction (XRD), field - emission scanning electron microscopy (FE - SEM), Fourier - transform infrared spectroscopy (FT - IR), and X - ray photoelectron spectroscopy (XPS).
- **Electrochemical Tests**: The electrochemical performance of the materials was studied by methods such as electrochemical impedance spectroscopy (EIS), slow - scan cyclic voltammetry (SSCV), and potentiostatic intermittent titration technique (PITT).

### Main Results
- **Structural Analysis**: XRD results show that the crystal phase of the Zr - doped samples is similar to that of pure β - LiVOPO₄, but the unit cell volume is slightly increased, which is beneficial to the diffusion of lithium ions.
- **Electrochemical Performance**: The charge - transfer resistance of the Zr - doped samples is reduced, and the cycling stability and rate performance are significantly improved.
- **Lithium - Ion Diffusion Coefficient**: Measured by SSCV, EIS and PITT, the lithium - ion diffusion coefficient of the Zr - doped samples is significantly higher than that of pure β - LiVOPO₄.

In conclusion, this paper successfully improves the ionic conductivity, lithium - ion diffusion kinetics and cycling stability of β - LiVOPO₄ cathode materials through Zr doping, providing new ideas for its practical application in lithium - ion batteries.