Abstract:Abstract The reduction in CO2 emissions is now a very popular topic. According to the International Energy Agency, CO2 emitted in 2021 was 6% more than that emitted in 2020. Carbon capture and storage (CCS) is gaining popularity as a possible solution to climate change. Experts estimate that industry and power plants will be responsible for 19% of total CO2 emissions by 2050. This paper presents the design of a semi-industrial-scale system for CO2 capture based on the moving bed temperature swing adsorption technology. According to the results of laboratory tests conducted by the SINTEF industry, this technology demonstrates high capture efficiency (>85%). The CO2 capture medium involved in adsorption is activated carbon passing through individual sections (cooling, heating, adsorption), where CO2 is bonded and then released. The heat and mass transfer processes are realised on the developed stand. The heat exchangers use steam and water as the heating/cooling medium. The paper reviews the existing solutions and describes the developed in-house design of heat exchangers that will ensure heat transfer conditions being a trade-off between economic and efficiency-related issues of the CO2 capture process. The designed test stand will be installed in a Polish power plant and is expected to meet the method energy intensity target, set at ≤ 2.7 MJ/kg CO2, with a capture efficiency exceeding 85%. The aim of the work was to develop and solve technical problems that would lead to the construction of a CO2 capture station with parameters mentioned above. This stand uses an innovative method where CO2 is captured by contacting the fluid (gases) with solid particles. The heat exchange associated with the heating and cooling of the adsorbent had to be solved. For this purpose, heat exchangers were designed with high thermal efficiency and to prevent the formation of mounds.

Carbon Dioxide Capture From Internal Combustion Engine Exhaust Using Temperature Swing Adsorption

CO 2 capture feasibility by Temperature Swing Adsorption in heavy-duty engines from an energy perspective

Comparative Analysis on Temperature Swing Adsorption Cycle for Carbon Capture by Using Internal Heat/mass Recovery

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Simulation and Experiment for Oxygen-enriched Combustion Engine Using Liquid Oxygen to Solidify CO 2

Analysis on Temperature Vacuum Swing Adsorption Integrated with Heat Pump for Efficient Carbon Capture

Thermofluidic Characteristics for a Novel Complementary Adsorption-Absorption Post-Combustion Partial CO2 Capture System

Temperature-vacuum Swing Adsorption for Direct Air Capture by Using Low-Grade Heat

The CO2 Capture System with a Swing Temperature Moving Bed

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

Reducing Energy Penalties in Carbon Capture with Organic Rankine Cycles

Compression-assisted decomposition thermochemical sorption energy storage system for deep engine exhaust waste heat recovery

Utilizing the Thermal Energy from Natural Gas Engines and the Cold Energy of Liquid Natural Gas to Satisfy the Heat, Power, and Cooling Demands of Carbon Capture and Storage in Maritime Decarbonization: Engineering, Enhancement, and 4E Analysis

Techno-economic analysis of onboard CO 2 capture for ultra-large container ships

Adapting an Internal Combustion Engine to Oxy-Fuel Combustion With In-Situ Oxygen Production

Coupling electrochemical CO2 conversion with CO2 capture

A comprehensive review of post-combustion CO 2 capture technologies for applications in the maritime sector: A focus on adsorbent materials

Post combustion carbon capture from diesel engine exhaust using phase change solvents with absorption technique

Utilizing waste heat from natural gas engine and LNG cold energy to meet heat-electric-cold demands of carbon capture and storage for ship decarbonization: Design, optimization and 4E analysis