Abstract:Carbon capture and storage (CCS) from fossil and biogenic (BECCS) emission sources is necessary to limit global warming to well below 2°C. The EU as well as Swedish national agencies emphasize the importance of CCS for emission intensive industries. However, the cost of implementing CCS is currently still higher than the cost of emitting CO2 via the EU ETS, for example. To incentivize rapid deployment of CCS, the concept of partial capture has been suggested, i.e. capturing only a fraction of the site emissions to reduce capture cost. Several studies have found that the utilization of excess heat from industrial processes could significantly reduce the capture cost as the heat required (~120°C) may be available in significant quantities. However, available excess heat will not be sufficient to power full capture at most industrial sites. In Sweden, many industries utilize all or part of their excess heat in heat recovery units or in combined heat and power (CHP) plants to produce electricity and deliver heat to municipal district heating (MDH) systems. A broad implementation of CCS will, thus, effect the availability of excess heat for industrial heat and power generation. The future product portfolio of industrial processes with excess heat export and CHP plants can therefore be expected to include not only heat and power production, but also climate services (CCS/BECCS) and grid services (frequency regulation due to intermittent renewables). The aim of this work is to assess partial capture at sites that have access to low-value excess heat to power the capture process, whilst considering competition from using the excess heat for MDH delivery. The work is based on process modelling and cost estimation of CO2 capture processes using amine absorption for two illustrative case studies, a refinery and a steel mill, which both currently use excess heat for MDH. The main focus is on investigating how seasonal variations in the availability of excess heat as well as the demand of district heating impact cost-efficient design and operation of partial capture at industrial sites. A challenge when utilizing excess heat in connection to a process connected to a district heating system is that the heat source which can be used to power part of the capture process will exhibit seasonal availability, and thus may inflict extra cost for the CCS plant not running at full load, and therefore may counteract the economic motivation for partial capture. To prevent this, heat integration between CCS and municipal district heating is investigated, for example by utilizing heat from the CO2 compression so that low-pressure steam is released from MDH to provide heat to capture CO2 whilst maintaining MDH supply. The design of the amine absorption capture process will have to handle significant load changes and still maintain high separation efficiency within hydrodynamic boundaries of the absorber and stripper columns. The cost of such operation will depend on the solvent circulation flows, the number of absorber columns (including packing and liquid collectors/distributors) and capacity of solvent buffer tanks for storing unused solvent during the winter season. Assuming that a constant amount of CO2 is avoided, the avoidance cost of CCS based on excess heat with seasonal heat load variations is compared to the avoidance cost of CCS based on the use of external fuel to achieve a constant heat load to the reboiler.

CO 2 capture feasibility by Temperature Swing Adsorption in heavy-duty engines from an energy perspective

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Comparative Analysis on Temperature Swing Adsorption Cycle for Carbon Capture by Using Internal Heat/mass Recovery

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Carbon Dioxide Capture From Internal Combustion Engine Exhaust Using Temperature Swing Adsorption

Investigation of Organic Rankine Cycle Integrated with Double Latent Thermal Energy Storage for Engine Waste Heat Recovery

Analysis on Temperature Vacuum Swing Adsorption Integrated with Heat Pump for Efficient Carbon Capture

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Temperature-vacuum Swing Adsorption for Direct Air Capture by Using Low-Grade Heat

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Techno-economic Analysis on Temperature Vacuum Swing Adsorption System Integrated with Pre-Dehumidification for Direct Air Capture

Utilizing waste heat from natural gas engine and LNG cold energy to meet heat-electric-cold demands of carbon capture and storage for ship decarbonization: Design, optimization and 4E analysis

Efficient utilization of industrial excess heat for carbon capture and district heating

Utilizing the Thermal Energy from Natural Gas Engines and the Cold Energy of Liquid Natural Gas to Satisfy the Heat, Power, and Cooling Demands of Carbon Capture and Storage in Maritime Decarbonization: Engineering, Enhancement, and 4E Analysis

Steam-assisted Temperature Swing Adsorption for Carbon Capture Integrated with Heat Pump

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

The CO2 Capture System with a Swing Temperature Moving Bed

Adsorption-based Post-Combustion Carbon Capture Assisted by Synergetic Heating and Cooling

Compression-assisted decomposition thermochemical sorption energy storage system for deep engine exhaust waste heat recovery