Abstract:Background With the current rapid economic growth, demands for energy are progressively increasing. Energy shortages have attracted significant attention due to the shrinking availability of non-renewable resources. Therefore, thermal energy storage is one of the solutions that lead to saving of fossil fuels and make systems more cost-effective by the storage of wasted thermal energy. In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals. Nevertheless, leakage problems and low thermal conductivity limit the practical applications of PCMs. Therefore, form-stable phase change materials with high thermal conductivity are urgently needed. Results A novel form-stable composite phase change material was prepared by incorporating PEG into waste sawdust with 5% EG. In the composites, PEG served as a phase change material, while waste sawdust acted as a carrier matrix. EG was added to help increase the thermal conductivity of the composites. The melting temperature of CPCMs-4 with 5% EG was found to be 58.6 °C with a phase change enthalpy of 145.3 kJ/kg, while the solidifying temperature was 48.5 °C with a phase change enthalpy of 131.4 kJ/kg. The thermal conductivity of CPCMs-4 with 5% EG increased by 23.8% compared with that of CPCMs-4. Moreover, no obvious changes in melting, solidifying temperature, or latent heat after 200 heating–cooling cycles were detected. The supercooling extent of CPCMs-4 with 5% EG decreased by 19.2% compared with PEG. The volume change properties and wettability properties of CPCMs-4 with 5% EG are suitable for thermal energy in terms of practical application. Conclusions The prepared composites have excellent thermal and form-stable properties and they can be recognized as potential candidates for thermal energy storage as form-stable composite phase change materials. Using simple impregnation techniques with waste sawdust as a supporting material, this study demonstrates an innovative technology for practically and markedly enhancing the adsorption capacity of phase change materials.

Enhanced thermal conductivity of copper‐doped polyethylene glycol/urchin‐like porous titanium dioxide phase change materials for thermal energy storage

Thermal Conductivity Enhanced Polyethylene Glycol/expanded Perlite Shape-Stabilized Composite Phase Change Materials with Cu Powder for Thermal Energy Storage

Thermal conductivity enhancement of polyethylene glycol/NF composite as stabilized phase change materials for thermal energy storage

Ti3C2Tx@Polyvinyl alcohol foam-Supported Phase Change Materials with Simultaneous Enhanced Thermal Conductivity and Solar-Thermal Conversion Performance

Enhanced thermal conductivity of PEG/diatomite shape-stabilized phase change materials with Ag nanoparticles for thermal energy storage

Shape‐stabilized Phase Change Material with Enhanced Thermal Conductivity Fabricated Based on Biomimetic Polymerization and in Situ Reduction of Cu Ions

3D flower-like CuO@PEG composite phase change materials with photo response for applications in energy conversion and storage

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

Using surface-modified UiO-66 with hierarchical pores to pack polyethylene glycol for phase change thermal energy storage: Experiment and molecular dynamics simulations

Stable and reliable PEG/TiO2 phase change composite with enhanced thermal conductivity based on a facile sol-gel method without deionized water

Improving the Heat Transfer of Phase Change Composites for Thermal Energy Storage by Adding Copper: Preparation and Thermal Properties

Enhanced photo-thermal conversion in phase change materials by Cu-Zn Bi-metallic metal-organic framework and expanded graphite

Polyethylene Glycol/Expanded Vermiculite Shape-Stabilized Composite Phase Change Materials for Thermal Energy Storage

Thermal Conductivity Enhancement of Form-Stable Tetradecanol/expanded Perlite Composite Phase Change Materials by Adding Cu Powder and Carbon Fiber for Thermal Energy Storage

MXene-decorated bio-based porous carbon composite phase change material for superior solar-thermal energy storage and thermal management of electronic components

Copper Microsphere Hybrid Mesoporous Carbon As Matrix for Preparation of Shape-Stabilized Phase Change Materials with Improved Thermal Properties

Mica-stabilized polyethylene glycol composite phase change materials for thermal energy storage

Enhanced Thermal Conductivity of Form-Stable Phase Change Composite with Single-Walled Carbon Nanotubes for Thermal Energy Storage

Shape-stabilized composite phase change material PEG@TiO2 through in situ encapsulation of PEG into 3D nanoporous TiO2 for thermal energy storage

Polyethylene glycol with dual three-dimensional porous carbon nanotube/diamond : a high thermal conductivity of composite PCM

Photo-to-thermal conversion and energy storage of polyethylene glycol/copper sulfide composite PCMs