Abstract:A shape-stabilized composite phase change material (ss-CPCM) comprising polyethylene glycol (PEG) and porous carbon was prepared by absorbing PEG into porous carbon, assisted by ultrasound. In the composite, PEG served as a phase change material for thermal energy storage, and the porous carbon, which was prepared from fresh potato via freeze drying followed by heat treatment, was used as an absorbent that also acted as the supporting material. Various analytical techniques were used to investigate the chemical composition, microstructure, and thermal properties of the prepared PEG/porous carbon ss-CPCMs. Scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopic results indicated that PEG was well absorbed and encapsulated in the porous structure of the carbon and that there was no chemical reaction between them during the phase change process. The shape and exudation stability test results indicated that the PEG/porous carbon ss-CPCMs have excellent shape stability, compared to pristine PEG. The contact angle test suggested that the melting PEG has good level of wettability on the carbon so that melting PEG could be well protected from exudation in the porous carbon by surface tension effects, even if the temperature is higher than the melting point of PEG. Differential scanning calorimetric results showed that the PEG/porous carbon ss-CPCMs have considerable phase change enthalpies and thermal storage capabilities. In addition to this, the latent heats of ss-CPCMs increased with increasing contents of PEG in the composites, and the highest value was achieved when the amount of PEG was 50%. Moreover, the thermogravimetric analysis results showed that the composites had excellent thermal stabilities. Based on the above analyses, the prepared ss-CPCM with 50% PEG content proved to be a promising candidate for thermal energy storage applications.

Copper Microsphere Hybrid Mesoporous Carbon As Matrix for Preparation of Shape-Stabilized Phase Change Materials with Improved Thermal Properties

Shape‐stabilized Phase Change Material with Enhanced Thermal Conductivity Fabricated Based on Biomimetic Polymerization and in Situ Reduction of Cu Ions

Efficient Shape-Stabilized Phase-Change Material Based on Novel Mesoporous Carbon Microspheres As a Matrix for Polyethylene Glycol: Preparation and Thermal Properties

Thermal Conductivity Enhanced Polyethylene Glycol/expanded Perlite Shape-Stabilized Composite Phase Change Materials with Cu Powder for Thermal Energy Storage

A Facile and Simple Method for Preparation of Novel High-Efficient Form-Stable Phase Change Materials Using Biomimetic–Synthetic Polydopamine Microspheres As a Matrix for Thermal Energy Storage

Polyethylene Glycol/mesoporous Calcium Silicate Shape-Stabilized Composite Phase Change Material: Preparation, Characterization, and Adjustable Thermal Property

Fabricated Polyethylene glycol/ hydroxylated carbon nanotubes shape-stabilized phase change materials with improving thermal conductivity

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

A Novel Strategy for Enhancing the Thermal Conductivity of Shape-Stable Phase Change Materials Via Carbon-Based in Situ Reduction of Metal Ions

Preparation and thermal properties of shape-stabilized composite phase change materials based on polyethylene glycol and porous carbon prepared from potato

Preparation and Thermal Properties of Novel Shape-Stabilized Phase Change Materials Based on Polyethylene Glycol/Meso-Structured Onion-Like Silica Composite

Shape-stabilized phase change material with highly thermal conductive matrix developed by one-step pyrolysis method

Polyethylene glycol/Cu/SiO2 form stable composite phase change materials: preparation, characterization, and thermal conductivity enhancement

Study on a PEG/epoxy Shape-Stabilized Phase Change Material: Preparation, Thermal Properties and Thermal Storage Performance

Carbon layer-modified mesoporous silica supporter for PEG to improve the thermal properties of composite phase change material

A Unique Strategy for Polyethylene Glycol/Hybrid Carbon Foam Phase Change Materials: Morphologies, Thermal Properties, and Energy Storage Behavior

MWCNTs/hydroxypropyl cellulose/polyethylene glycol-based shape-stabilized phase change materials

Novel Form-Stable Phase Change Materials with Enhancing Crystallization Rate for Thermal Energy Storage

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management

Polyethylene Glycol/Expanded Vermiculite Shape-Stabilized Composite Phase Change Materials for Thermal Energy Storage

Novel Light-Driven and Electro-Driven Polyethylene Glycol/two-Dimensional MXene Form-Stable Phase Change Material with Enhanced Thermal Conductivity and Electrical Conductivity for Thermal Energy Storage