Abstract:Corrosion defects in steel pipes can lead to pipeline failure, and such failures can have severe impacts; thus, developing appropriate corrosion mitigation schemes to prevent them can be beneficial. To this end, the influences of variables such as the depth, length, and group spacing of corrosion defects on the failure of X80 steel pipes containing group corrosion defects were analysed in this study. Abaqus, a simulation software, was used for non-linear finite element analyses, and 52 groups corresponding to corrosions under different geometric factors were prepared. Furthermore, a pipeline failure pressure prediction model was established using 138 sets of simulations to determine the maximum von Mises stresses of pipelines subjected to internal pressures under different working conditions. Actual blast test data and error comparisons with various existing evaluation standards were conducted to verify the accuracy of the proposed model. The results revealed that an increase in the internal pressure and the changes in the depth, length, and group spacing of group corrosion defects impact the maximum von Mises stress in the pipe. Among the group corrosion defects considered, the depth of the deepest defect was found to be the most critical factor in determining the form of damage and the failure pressure of pipes containing corrosion defects. The length of corrosion defects and the axial spacing between groups of defects were found to be the secondary factors that affect the failure pressure. In an actual pipeline, group corrosion defects are expected to cause a reduction in the wall thickness and, thus, pose a threat to safety, an issue that warrants substantial attention. The results of this work can serve as a reference for assessing the failure of X80 steel pipelines containing group corrosion defects.

Determination of Folias Factor for Failure Pressure of Corroded Pipeline

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Failure pressure analysis of corroded moderate-to-high strength pipelines

Assessment on failure pressure of high strength pipeline with corrosion defects

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Analytical prediction of failure pressure for pipeline with long corrosion defect

Finite element analyses of corroded pipeline with single defect subjected to internal pressure and axial compressive stress

Comparative studies for failure pressure prediction of corroded pipelines

Failure Pressure Evaluation of Corroded Pipeline Using Semi-Empirical and Finite Element Analysis

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Experimental and Numerical Analysis of the Impact of Corrosion on the Failure Pressure of API 5L X65 Pipeline

Effects of depth in external and internal corrosion defects on failure pressure predictions of oil and gas pipelines using finite element models

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Burst capacity analysis of pipeline with multiple longitudinally aligned interacting corrosion defects subjected to internal pressure and axial compressive stress

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Finite element analysis of the failure of high-strength steel pipelines containing group corrosion defects

Failure pressure prediction by defect assessment and finite element modelling on pipelines containing a dent-corrosion defect

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Assessment by finite element modeling of the interaction of multiple corrosion defects and the effect on failure pressure of corroded pipelines

Development of an empirical model to predict the burst pressure of corroded elbows of pipelines by finite element modelling

The Failure Window Method and Its Application in Pipeline Burst