Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

Modeling Optical Floating Zone Crystal Growth in a High-Pressure, Single-Lamp Furnace

High-Pressure Laser Floating Zone Furnace

Growth of high-quality Y2O3–ZrO2 single-crystal optical fibers for ultra-high-temperature fiber-optic sensors

Advances in high-pressure laser floating zone growth: the Laser Optical Kristallmacher II

Recent Progress of Floating-Zone Techniques for Bulk Single-Crystal Growth

Floating zone furnace equipped with a high power laser of 1kW composed of five smart beams

A Volume Radiation Heat Transfer Model for Czochralski Crystal Growth Processes

Modeling of Advanced Melting Zone for Manufacturing of Optical Fibers

Local and Global Simulations of Bridgman and Liquid-Encapsulated Czochralski Crystal Growth

Physically-based, lumped-parameter models for the prediction of oxygen concentration during Czochralski growth of silicon crystals

Crucible-free Pulling of Germanium Crystals

A Novel Method For Melt Flow Control And Inclusion Suppression In Optical Crystal Growth

Hot Zone Design for Controlled Growth to Mitigate Cracking in Laser Crystal Growth

Nd:YAG single crystals grown by floating zone method in laser furnace

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System

Long-Term Stability of Novel Crucible Systems for the Growth of Oxygen-Free Czochralski Silicon Crystals

Growth of β-Ga 2 O 3 crystal with a diameter of 30 mm by laser-diode-heated floating zone (LDFZ) method

Diameter-Controlled Czochralski Growth of Silicon Crystals

Nd:YAG Single Crystals Grown by the Floating Zone Method in a Laser Furnace

Numerical Simulation of Unsteady Flows in Czochralski Crystal Growth by Lattice Boltzmann Methods

Growth Angle and Melt Meniscus of the RF-heated Floating Zone in Silicon Crystal Growth