Abstract:It has been repeatedly tested and proven that granulated feed and granulated semolina have a number of advantages over loose feed, since there is no self-sorting of components, losses during transportation and loss of nutrients during storage is reduced. The effective effect of such compound feeds is higher than that of loose feeds by 10-15% due to an increase in the level of sanitary quality and an increase in the digestibility of nutrients. In addition, up to 3...4% of liquid components can be introduced into the compound feed during granulation, compared to 1...2% for loose compound feed. At present, there is a tendency towards an increase in the share of production of granulated feed. The technology of granulating feed allows you to ensure stable uniformity, improve sanitary and hygienic indicators, increase nutritional value, increase shelf life, and minimize losses during its transportation and distribution. All this affects both the consumption of compound feed and the performance of animal and poultry rearing. At the same time, the main equipment for the production of mixed feed pellets is a pellet press. The task of controlling the press granulator as part of SMART technologies is to determine and implement such a ratio of steam consumption and the initial product, in which the indicators of the granulation process such as productivity, specific consumption of steam and electricity, as well as the quality properties of the granules would correspond to the required values. According to the most important practical recommendation for conducting the technological process of granulation, it is to provide the required conditions for conditioning with steam, liquid components in accordance with the properties of the initial processed product. At the same time, the hydrothermal treatment of compound feed affects, practically, all indicators of the granulation process and the quality of its final product. An analysis of the dependence of productivity on steam consumption obtained for various compound feed recipes allows us to conclude that it is possible and expedient to search for the optimal position of the regulating body for supplying steam to the pellet press mixer. At the same time, it is necessary that the productivity of the press tend to the maximum depending on the position of the regulating body for supplying steam to the press, and the magnitude of the current load of the main drive motor, which mainly determines the energy intensity of the process, was limited in a given range of values at zeroing of the corresponding compound feed recipe: The increment in the filling time of the cooling column between the cycles of the unloading device, which characterizes the performance of the pellet press, can be used to indirectly evaluate it and be used as an output indicator in the control system for the granulation process. The search algorithm for the optimal granulation mode consists of two parts: the stepwise start algorithm (bringing the system into the search zone) and the search algorithm for the optimal granulation mode. It is proposed to use the SMART-INDIVIDUAL system, which is equipped with a module with a regulation for monitoring parameters of equipment according to passport characteristics. At the same time, the system maintains an archive and controls the timing of maintenance.

Constructive and regime parameters of horizontal impact crusher of grain materials

Impact elements of feed grinder: a review

EXPERIMENTAL RESEARCH PROCESS OF GRINDING FODDER GRAIN USING THE VIBRATION DISC-TYPE CRUSHER

MODERNIZATION OF CORN GRAIN CRUSHER IN THE CONDITIONS OF IT-SYSTEM EQUIPMENT

Research into the perforated surface of the double staged grinder-crusher

THE KINEMATIC ANALYSIS OF A VIBRATION CRUSHER FOR FEED GRAIN

VEGETABLE RAW MATERIALS DESTRUCTION MECHANISMS IN A ROLLER CRUSHER WITH SET PLATES IN THE FORM OF A RT-PROFILE

Justification of the design and regime parameters of a mobile grain dryer

Influence of roller chopper parameters on the quality of corn cob chopping

Mini crusher-shredder for farms

EXPERIMENTAL DEVELOPMENT OF DISC GRAIN MILL

Studying the design and operational parameters of the sieve module of the grain cleaning machine

DEM Simulation of an Impact Crusher Using the Fast-Cutting Breakage Model

OPTIMUM DESIGN FOR BREAKING DEVICE WITH DOUBLE ROLLER BASED EDEM

IMPACT OF DRUM ROTATION FREQUENCY OF SEPARATING GRAIN THROWER ON GRAIN CLEANING EFFICIENCY

The influence of the moisture content of the stem mass on the quality of grinding at using a hammer crusher

Parameters and operation process of supplier rollers of the feed chopper device

Energy-saving technology for fine grinding of food raw materials frozen in blocks

Design Optimization of Hammer Blade Crusher to Improve the Crushing Performance

THEORETICAL JUSTIFICATION OF THE INFLUENCE OF THE MILLING ORGAN ON THE REDUCTION OF CORN PLANT RESIDUES

OPTIMIZATION OF PRESS-GRANULATOR WORK IN SMART TECHNOLOGIES SYSTEM