Abstract:A facile way to fabricate highly efficient organic light emitting devices (OLEDs) with insulator MnO as an electron injecting and transporting material was devised, which eliminates the problem of the oxidation of reactive dopants. The power efficiency of 1.1 lm/W by inserting 3-nm-thick MnO as the electron injecting layer was obtained, higher than the 0.8 lm/W efficiency for the reference device with 0.5-nm-thick LiF. A thermal co-evaporation layer containing 10% weight of MnO and tris(8-hydroxyquinolato) aluminum (Alq(3)) as the electron transporting layer showed more efficient electron transport ability, with turn-on voltage of 3.8 V, lower than 7.4 V for the intrinsic Alq3. Meanwhile, the insertion of thin MnO layer between organic photoactive layer and inorganic metal electrode significantly improved performance and stability of organic solar cell compared to device without it. The power conversion efficiency (PCE) of 2.91% by inserting 3-nm-thick MnO was obtained, higher than the 0.91% efficiency for the device without it, and 2.59% for the device with 0.5-nm-thick LiF. Charge transport of rhenium trioxide (ReO3) in organic electronic devices was investigated. The hole injection/transport was blocked and the electron injection/transport was enhanced with doping of ReO3 in organic electronic devices. Thus the charge balance and efficiency of the OLED were improved, 2.7 cd/A of current efficiency (CE) at 20 mA/cm(2) for the device with ReO3 was higher than 1.5 cd/A for the device without it. In the case of organic photovoltaic cells (OPV), the open-circuit voltage (V-oc), 0.58 V, was higher compared to the device without ReO3 (0.44 V) due to the improvement of interface properties. The PCE was increased to 2.27% by the combination of ReO3 (increasing V-oc) with poly(3,4-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) (improve hole transport to increase J(sc)) on the modification of the anode, higher than 1.85% for the device without ReO3.

A Novel Nucleation Inducer for Ultrathin Au Anodes in High Efficiency and Flexible Organic Optoelectronic Devices

Mixing plasmonic Au nanoparticles into all polymer layers for improving the efficiency of organic solar cells

Fabrication of nucleation induction layer of self-encapsulated metal anode by an atomic layer half-reaction for enhanced flexible OLEDs

Ultrathin Au Electrodes Based on a Hybrid Nucleation Layer for Flexible Organic Light-Emitting Devices

Epitaxial Ultrathin Au Films on Transparent Mica with Oxide Wetting Layer Applied to Organic Light-Emitting Devices

Tuning Work Function of Noble Metals As Promising Cathodes in Organic Electronic Devices

Enhanced Efficiency of Organic Light-Emitting Devices by Using a Directly Imprinted Nanopillared Ultrathin Metallic Electrode.

High-Efficiency Electron Injection Cathode of Au for Polymer Light-Emitting Devices

Ultra-Smooth and Efficient NiO/Ag/NiO Transparent Electrodes for Flexible Organic Light-Emitting Devices

A Novel, Weakly N‐Doped Cathode‐Modifying Layer in Organic Solar Cells

Highly Flexible Organic-Inorganic Hybrid Perovskite Light-Emitting Devices Based on an Ultrathin Au Electrode

Al2O3 Nanoparticles As Surface Modifier Enables Deposition of High Quality Perovskite Films for Ultra-Flexible Photovoltaics

Ultrathin and Ultrasmooth Au Films As Transparent Electrodes in Ito-Free Organic Light-Emitting Devices

p-Type Doping of Gold Nanoparticles on Ellagic Acid Noncovalently Modified Single-Walled Carbon Nanotubes Compositing with PEDOT:PSS Bilayer Films for Organic Light-Emitting Diodes

Hierarchical Nanoarchitectonics of Ultrathin 2D Organic Nanosheets for Aqueous Processed Electroluminescent Devices

Design and Synthesis of Asymmetric Au(III) Complexes Exhibiting Bright Anisotropic Emission for High‐Performance Organic Light‐Emitting Diodes

A Novel Crosslinkable Electron Injection/Transporting Material for Solution Processed Polymer Light-Emitting Diodes

N-Type Doping in Organic Electronic Devices

Copper phosphotungstate as low cost, solution-processed, stable inorganic anode interfacial material enables organic photovoltaics with over 18% efficiency

An ultra-thin gold nanoparticle layer modified cathode for the enhanced performance of polymer light emitting diodes

Morphology control of perovskite light-emitting diodes by using amino acid self-assembled monolayers