Abstract:Nowadays it is widely acknowledged that solar photovoltaic energy is one of the preferred options for sustainable management of the future energy needs of the world. For this, new technological processes, known as second and third generations, based on the use of thin films and nanomaterials, have recently been developed in order to reduce the cost of solar cells. Over the past few years, the yield of second-generation Cu(In, Ga)Se2 thin-film cells has exceeded 22 %. It was found that as nanostructured materials such as nanowire arrays often have a higher light absorption rate than thin films, they can therefore be used. This article aims to design and model nanostructured CIGS thin film solar cells based on indium tin oxide (ITO) nanowires. Modelling provides information on the operation of CIGS solar cells, as well as on the mechanisms of absorption and electric charge transport. The purpose of this work is to evaluate the electrical and optical characteristics (ISC, VOC, FF, η) of a ZnO/CdS/CIGS heterojunction thin film structure. Thus, an optimum efficiency of 17.57 % and a form factor of 76.56 % were achieved. Afterwards, the Mo film rear contact was replaced with ITO nanowires which were introduced into the CIGS-based solar cell. The results indicated that the solar cells under study exhibited very good photovoltaic performance, with an efficiency of 21.26 %. It is worth noting that this performance is higher than that of the corresponding CIGS thin film cells. In addition, the large active surface area of the ITO nanowire electrode and the short distance that the charge must travel helped to improve charge collection in the nanostructure. This would certainly increase the short circuit current ISC, and consequently the electrical efficiency. The simulation was based on the low-field mobility model, and on Shockley-Read-Hall (SRH) and Auger carrier transport and recombination models which may be activated in ATLAS-SILVACO (2D).

Optimization of Efficient Copper-Indium-Gallium Di-Selenide Solar Cell

A qualitative Design and optimization of CIGS-based Solar Cells with Sn2S3 Back Surface Field: A plan for achieving 21.83 % efficiency

Optimized CIGS based solar cell towardsan efficient solar cell: impact of layers thickness and doping

Design and numerical analysis of CIGS-based solar cell with V2O5 as the BSF layer to enhance photovoltaic performance

Numerical Simulation of Copper Indium Gallium Diselenide Solar Cell with Ultra-Thin BaSi2 Back Surface Field Layer Using the Non-Toxic In2Se3 Buffer Layer

Impact of graded CIGS absorber layer on Cd-free CIGS thin-film solar cell performance: Numerical optimization

Materials Optimization for thin-film copper indium gallium selenide (CIGS) solar cell based on distributed braggs reflector

Improvement of the CIGS solar cell performance: structure based on a ZnS buffer layer

Improving the efficiency of a CIGS solar cell to above 31% with Sb 2 S 3 as a new BSF: a numerical simulation approach by SCAPS-1D

Properties of High Efficiency Nanostructured Copper Indium Gallium Selenide Thin Film Solar Cells

Investigation on the Performance of CIGS/TiO2 Heterojunction Using SCAPS Software for Highly Efficient Solar Cells

Improving the efficiency of CIGS solar cells using an optimized p-type CZTSSe electron reflector layer

Improving the efficiency of copper indium gallium (Di-)selenide (CIGS) solar cells through integration of a moth-eye textured resist with a refractive index similar to aluminum doped zinc oxide

Optimization of CuInGaSSe properties and CuInGaSSe/CdS interface quality for efficient solar cells processed with CuInGa precursors

A comprehensive study of the optimization and comparison of cesium halide perovskite solar cells using ZnO and Cu2FeSnS4 as charge transport layers

Efficiency Enhancement of Ultra-thin CIGS Solar Cells Using Bandgap Grading and Embedding Au Plasmonic Nanoparticles

Achieving 45% efficiency of CIGS/CdS Solar Cell by adding GaAs using optimization techniques

Efficiency enhancement of copper indium gallium selenide solar cells fabricated on polyimide foils with multiple metal layers

Numerical Investigation of Optimal Buffer Layer and Performance Evaluation on CdTe Solar Cell

Electrical barriers and their elimination by tuning (Zn,Mg)O composition in Cu(In,Ga)S2: Systematic approach to achieve over 14% power conversion efficiency

A computational study for understanding the effect of various parameters on the performance of three different CI(G)Se-based thin film solar cells