Abstract:Wearable sensors are currently one of the top emerging areas with enormous growth potential. Low‐cost fabrication techniques using simple and scalable printing technologies are making a significant impact on their development. Recent advances in high‐performance gas/vapor sensors based on carbon nanomaterials have shown potential applications ranging from disease diagnostics to environmental monitoring and defences. Herein, a hybrid sensing material of 1D carbon nanotubes (CNTs) and 2D graphene is developed, and a conductive ink is formulated, which is applied for fabricating a nitrogen dioxide (NO2) gas sensor array within a compact design utilizing extrusion printing. To improve NO2‐sensing performance and optimal operating temperature, a reverse‐side layer is designed, which combines MXene and poly(3,4‐ethylenedioxythiophene)‐doped poly(styrene sulfonate) (PEDOT:PSS), and functions as a Joule heater. The printed CNT–graphene‐based sensor with an embedded MXene/PEDOT:PSS heater is capable of detecting trace amounts of NO2 gas (1 ppm) at 65 °C. The sensor is able to distinguish between various gases/volatile organic compounds and target NO2 gas based on their chemical affinities. The printed CNT–graphene sensor array also demonstrates a high‐level of recoverability, satisfied stability, durability, and reproducibility, which render this sensor a suitable candidate for practical applications. This work presents the development of the printable ink composed of 1D–2D hybrid carbon nanomaterials (carbon nanotube and graphene) formulated using eco‐friendly medium for 3D extrusion printing and fabrication of chemoresistive sensor arrays, with an embedded MXene/PEDOT:PSS heater capable of detecting trace amounts of NO2 gas with enhanced sensing characteristics.

Gas Sensors Based on Drop-Casted ZnO Nanowires and Micro-Cantilever Printed Ag Contacts

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Enhanced P-Type NO2-sensing Properties of ZnO Nanowires Utilizing CNTs Electrode

Highly Sensitive, Selective, Flexible and Scalable Room-Temperature NO<sub>2</sub> Gas Sensor Based on Hollow SnO<sub>2</sub>/ZnO Nanofibers

Sprayed, Scalable, Wearable, and Portable NO2 Sensor Array Using Fully Flexible AgNPs-All-Carbon Nanostructures.

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Highly Sensitive, Selective, Flexible and Scalable Room-Temperature NO2 Gas Sensor Based on Hollow SnO2/ZnO Nanofibers

Tailoring the Surface Properties of ZnO Nanowires by ALD Deposition

Fabrication of Large-Area Au Nanoparticle Decorated ZnO@ZIF-8 Core-Shell Heterostructure Nanorods for Ppb-Level NO2 Gas Sensing at Room Temperature

Zn–Co Zeolitic Imidazolate Framework Nanoparticles Intercalated in Graphene Nanosheets for Room-Temperature NO 2 Sensing

Metal Oxide Nanowires for Gas Sensor Applications

Extrusion‐Printed CNT–Graphene Sensor Array with Embedded MXene/PEDOT:PSS Heater for Enhanced NO 2 Sensing at Low Temperature

Confined Formation of Ultrathin ZnO Nanorods/Reduced Graphene Oxide Mesoporous Nanocomposites for High-Performance Room-Temperature NO 2 Sensors.

High selectivity and sensitivity through nanoparticle sensors for cleanroom CO2detection

ZnO Based Ultrasensitive CO Chemiresistive Gas Sensor

Wearable NO<sub>2</sub> sensing and wireless application based on ZnS nanoparticles/nitrogen-doped reduced graphene oxide

ZnO Nanocluster-Functionalized Single-Walled Carbon Nanotubes Synthesized by Microwave Irradiation for Highly Sensitive NO2 Detection at Room Temperature

Mosaic-Like Micropatterned Monolayer RGO/AgNPs Film Gas Sensor with Enhanced Room-Temperature NO2 Response/Recovery Properties

Influence of Low-Dimension Carbon-Based Electrodes on the Performance of SnO2 Nanofiber Gas Sensors at Room Temperature

Farming of ZnO−SnO2 Nanocubes for Chemiresistive NO2 Gas Detection