Influence of Radioactive Sludge Content on Vitrification of High-Level Liquid Waste
Shengheng Tan,Jiong Chang,Xiao Liu,Shikuan Sun,Liang Xian,Shengdong Zhang
DOI: https://doi.org/10.3390/su15064937
IF: 3.9
2023-03-10
Sustainability
Abstract:The radioactive sludges formed at the bottom of high-level liquid waste (HLW) storage tanks pose challenges when the HLWs are vitrified. This study aims to determine the influence of the sludge content (enriched in Na2O, Al2O3, NiO, Fe2O3, and BaSO4) on the structure and properties of waste glasses in order to find the optimal ratio of sludges to HLW during vitrification. In the experiments, the simulated sludge and simulated HLW were mixed at different ratios from 0:8 to 4:4, with an overall waste content of 16 wt %, in a borosilicate glass wasteform. It is found that the glass density, molar volume, sulfur retention, and glass transition temperature changed little when increasing the sludge content of the glasses, while the viscosity, chemical durability, and crystallization features of the glasses varied notably. The crystals formed in the glasses during the thermal treatment were exclusively Fe-substituted diopside (Ca, Mg, Fe)2Si2O6. An increase in the Al2O3 and NiO content of the glasses may have been responsible for the increased crystallinity at high temperatures. The leaching rate of Si, B, Na, and Cs from the glasses declined with the increasing addition of sludge to the glasses. Although all the glasses fulfilled the requirements for vitrification processing and glass-product performance, it is recommended that the sludge content of the whole waste should not exceed 25 wt %. This study guides further research on the immobilization of high-level sludges.
environmental sciences,environmental studies,green & sustainable science & technology