Abstract:Aiming at the problem of uneven forces on the inner and outer surfaces during counter-roller spinning (CRS) of thin-walled cylinders, which affects the spinning stability and forming quality, a new dual asymmetric active counter-roller spinning (DAACRS) process is proposed. It enhances the radial strain uniformity through more consistent contact of the inner and outer rollers and the material flow on the inner and outer surfaces. The theoretical analytical model of the influence of the spinning structural and process parameters on the contact condition and the oriented relationship is established. On this basis, the Kriging predictive surrogate model under the coupling influence of these parameters is established, and the spinning parameters optimized by the multi-objective particle swarm optimization (MOPSO) algorithm in the global continuous variables are obtained. The radial strain gradient effect of traditional spun parts is basically eliminated under this process parameters. Additionally, an active counter-roller spinning (ACRS) machine is independently developed and a comprehensive macro-micro quality evaluation method is proposed. The ACRS process can transform the material from dispersed {001}<110> low-strength plate texture to more standard {001}<100> high-strength plate texture, and obtain balanced axial and circumferential tensile strengths. Moreover, the new DAACRS process resulted in more balanced forming accuracy, inner and outer surface grain size, texture strength, and isotropic mechanical properties due to the high radial strain uniformity. Compared with the traditional completely symmetric active counter-roller spinning (CSACRS), the L ̅ , O ̅ , U D, U T{100}, U T{110}, and U T{111} are improved by 0.08265 mm, 0.00335 mm, 4.83%, 10.55%, 11.54%, and 16.34%, respectively. Further analysis provides that the allowable values of strain uniformity for the higher quality thin-walled cylinders are [U ε(PEEQ)]=0.365 and [U ε(Max Principal)]=0.438. These results increase the understanding of the strain change, microstructure evolution, and mechanical properties change mechanism of the CRS process, thereby providing important guidance for improving the CRS process and forming quality.

Finite element simulation and microstructure of two-pass inner spinning process of curved-generatrix cone cylindrical parts with annealing/quenching

Spinning Process of 2219 Aluminum Alloy Tubes for Used in Hydroforming

Full active counter-roller spinning for thin-walled cylinders: macroscopic deformation mechanism, mesoscopic texture evolution, and forming performance strengthening

Multi-pass Spinning of Thin-Walled Tubular Part with Longitudinal Inner Ribs

The Analytical Model of Ball-Spinning Force for Processing an Annular Groove on the Inner Wall of a Steel Tube

Enhancing radial strain uniformity of thin-walled cylinder by the dual asymmetric active counter-roller spinning process

Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process

Spinning of curvilinear generatrix parts without mandrel based on main and auxiliary rollers

Study of microstructure evolution of magnesium alloy cylindrical part with longitudinal inner ribs during hot flow forming by coupling ANN-modified CA and FEA

Numerical Simulation of Influence of Roller Working Surface on Spin-Forming of Rectangular Inner Meshing Gear

Microstructure, Texture, and Deep Drawability under Two Different Cold-Rolling Processes in Ferritic Stainless Steel

Numerical simulation and experimental study on non-axisymmetric spinning with a groove at the middle of the tube

The Effects of Cold Rolling and Annealing on the Microstructure Evolution of Ordered C-2000 Alloy during Metallic Wire Preparation

Wrinkling and Strengthening Behaviors in the Two-Layer-Sheet Hot-Forming–Quenching Integrated Process for an Al–Cu–Mg-Alloy Thin-Walled Curved-Surface Shell

Residual stress relaxation considering microstructure evolution in heat treatment of metallic thin-walled part

Residual-stress relaxation mechanism and model description of 5052H32 Al alloy spun ellipsoidal heads during annealing treatment

NUMERICAL SIMULATION AND EXPERIMENTATION CUP-SHAPED THIN-WALLED INNER RECTANGULAR GEAR FORMED BY SPINNING

Annealing process optimization of 3D coil core based on annealing simulation experiment and thermal mechanical coupling model

Study on Counter-Roller Spinning Technology of Large Diameter Aluminum Alloy Cylindrical Parts

Effects of spinning parameters on microstructures of ellipsoidal heads during marginal-restraint mandrel-free spinning

Numerical Investigation of Effects of Deformation Allocation on Multi-Pass Conventional Spinning Process of Curvilinear Generatrix Parts