Catalytic performance and deactivation of Ni/MCM-41 catalyst in the hydrogenation of pure acetylene to ethylene

Shuzhen Zhou,Lihua Kang,Zhu Xu,Mingyuan Zhu

DOI: https://doi.org/10.1039/c9ra09878j

IF: 4.036

2020-01-01

RSC Advances

Abstract:Ni/MCM-41 catalysts were prepared by an impregnation method for acetylene hydrogenation to ethylene based on the calcium carbide acetylene route.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Acid-Resistant Performance of Ni-Based Hydrogenation Catalysts Supported by Hydrophobic Activated Carbon

Zuo-jun WEI,Ya-xin HOU,Ying-xin LIU,Yun-jiang GU

DOI: https://doi.org/10.3969/j.issn.1003-9015.2016.02.020

2016-01-01

Abstract:In order to improve activity and acid-resistance of hydrogenationcatalysts, a series of nickel-based catalysts doped with Fe, Mn, Mo and supported by NaBH4-reduced activated carbon (AC-NaBH4) were prepared via an incipient wetness method. They were applied for the hydrogenation of phthalic anhydride, levulinic acid, maleic anhydride, succinic anhydride and trimellitic anhydride. The results show that the Fe doped catalyst containing 5%(wt) Fe and 15%(wt) Ni (5Fe-15Ni/AC-NaBH4) has satisfactory activity and stability, which can be attributed to the hydrophobic surface of AC-NaBH4 that prevents the resulted water from contacting metal surface. This makes the decrease of H+ concentration which eventually reduces Ni corrosion. Furthermore, XRD and TEM analysis prove the formation of Fe-Ni alloy, which is beneficial to the disperse of nickel particles and can effectively inhibit nickel corrosion.
Enhancement of Acetylene Hydrogenation Activity over Ni–Zn Bimetallic Catalyst by Doping with Au

Jinghua Xu,Yanqiang Huang,Xiaofeng Yang,Lei He,Huiran Zhou,Qingquan Lin,Tao Zhang,Haoran Geng

DOI: https://doi.org/10.1166/jnn.2014.8955

2014-01-01

Journal of Nanoscience and Nanotechnology

Abstract:A series of modified Ni-Zn bimetallic catalysts were prepared by depositing different kinds of 4 wt% metals (Ir, Pt, Au, Cu, Ag) on the Ni-Zn-Al hydrotalcite (NZAH) and tested in the selective hydrogenation of acetylene. The activity was enhanced by 3-fold over the 4 wt% Au/NZAH, meanwhile, the yield of C2H4 was also increased more than 4 times compared with the NZAH. Characterization by means of H2-TPR, XRD, SEM, and TEM revealed that Au was highly dispersed on the catalyst, and the ternary Au-Ni-Zn alloy was formed during the H2 reduction at 500 degrees C. Doping Au in Ni-Zn bimetallic catalyst weakens the adsorption of acetylene and also hinders the coke deposition on the catalyst, which leads to the enhanced activity in acetylene hydrogenation.
Catalytic Decarbonylation Of Stearic Acid To Hydrocarbons Over Activated Carbon-Supported Nickel

Zihao Zhang,Zhe Chen,Hao Chen,Xin Gou,Kequan Chen,Xiuyang Lu,Pingkai Ouyang,Jie Fu

DOI: https://doi.org/10.1039/c8se00189h

IF: 6.813

2018-01-01

Sustainable Energy & Fuels

Abstract:In this study, the deoxygenation of stearic acid over a series of Ni-based catalysts in the absence of hydrogen and solvents was investigated. Ni/Al2O3, Ni/TiO2, Ni/ZrO2, and Ni/AC (activated carbon) were synthesized using the wetness impregnation method, and Ni/AC showed the best activity for deoxygenation. X-ray diffraction, transmission electron microscopy, H-2 temperature-programmed reduction, and N-2 adsorption-desorption analyses revealed that Ni had an average particle size of about 9.6 nm with good crystallinity, the largest surface area and strong Ni-carrier interactions in Ni/AC. These properties of Ni/AC contributed to its good deoxygenation activity. Ni/AC produced hydrocarbons (71.4% yield) such as heptadecane, heptadecene, aromatics, and cracking paraffins under optimized reaction conditions. Furthermore, it was found that the deoxygenation of stearic acid over Ni/AC in the absence of hydrogen and solvent proceeds mainly via decarbonylation.
An efficient NiCu@C/Al 2 O 3 catalyst for selective hydrogenation of acetylene

Shihong Zhou,Chenyang Lu,Wenyu Zhou,Yi Bi,Cailong Zhou,Aonan Zeng,Anjie Wang,Luxi Tan,Lichun Dong

DOI: https://doi.org/10.1039/d2cc04384j

IF: 4.9

2022-01-01

Chemical Communications

Abstract:A NiCu@C core–shell nanostructure supported on Al 2 O 3 delivers superior catalytic performance for selective hydrogenation of acetylene.

chemistry, multidisciplinary
Semi-Hydrogenation of Acetylene to Ethylene Catalyzed by Bimetallic CuNi/ZSM-12 Catalysts

Song Hu,Chong Zhang,Mingyu Wu,Runping Ye,Depan Shi,Mujin Li,Peng Zhao,Rongbin Zhang,Gang Feng

DOI: https://doi.org/10.3390/catal12091072

IF: 3.9

2022-09-20

Catalysts

Abstract:The purpose of this work is to develop a low-cost and high-performance catalyst for the selective catalytic hydrogenation of acetylene to ethylene. Non-precious metals Cu and Ni were selected as active ingredients for this study. Using ZSM-12 as a carrier, Cu-Ni bimetallic catalysts of CuNix/ZSM-12 (x = 5, 7, 9, 11) with different Ni/Cu ratios were prepared by incipient wetness impregnation method. The total Cu and Ni loading were 2 wt%. Under the optimal reaction conditions, the acetylene conversion was 100%, and the ethylene selectivity was 82.48%. The CuNi7/ZSM-12 prepared in this work exhibits good performance in the semi-hydrogenation of acetylene to ethylene with low cost and has potential for industrial application.

chemistry, physical
Carbon nitride with encapsulated nickel for semi-hydrogenation of acetylene: pyridinic nitrogen is responsible for hydrogen dissociative adsorption

Teng Fu,Tao Wang,Hongfang Sun,Yida Xu,Zhen Dong,Xiangke Guo,Luming Peng,Yan Zhu,Zhaoxu Chen,Weiping Ding

DOI: https://doi.org/10.1007/s11426-017-9226-7

2018-07-03

Science China Chemistry

Abstract:A new mechanism of catalyst has been demonstrated in this article. With the interaction between carbon nitride (CN) and encapsulated nickel, the CN in the catalyst has been endowed with new active sites for the adsorption and activation of hydrogen while nickel itself is physically isolated from the contact with reactive molecules. For the selective hydrogenation of acetylene in large amount of ethylene, the catalyst shows excellent ethylene selectivity than the nickel catalyst itself, which is almost totally unselective. Meanwhile, the CN itself is inactive for the reaction. The results of characterization demonstrate that pyridinic nitrogen doped in the carbon matrix should be the active sites for hydrogen dissociative adsorption. The theoretical calculations further confirm the results and provide with the detail in the electron transfer between nickel and CN in the catalyst. The current results supply a new concept for design of high performance catalyst.

chemistry, multidisciplinary
Atomic Layer Deposited Palladium Nanoparticle Catalysts Supported on Titanium Dioxide Modified MCM-41 for Selective Hydrogenation of Acetylene

Ting Gong,Yu Huang,Lijun Qin,Wangle Zhang,Jianguo Li,Longfei Hui,Hao Feng

DOI: https://doi.org/10.1016/j.apsusc.2019.07.237

IF: 6.7

2019-01-01

Applied Surface Science

Abstract:In the chemical industry palladium-based catalysts are commonly used to remove trace amounts of acetylene from ethylene feed. In this work atomic layer deposition (ALD) is utilized to synthesize uniformly dispersed Pd nanoparticles inside the meso-pores of a silica molecular sieve MCM-41. The space confinement effect from the internal channels of the molecular sieve leads to a very narrow size distribution (2-3 nm) of Pd nanoparticles and effectively prevents the particles from sintering during high temperature treatments. In selective hydrogenation of acetylene the ALD Pd nanoparticle catalysts exhibit excellent catalytic performances under ambient temperature and pressure. The excellent performance of the ALD catalyst is attributed to small Pd nanoparticles uniformly dispersed in the meso-pores of MCM-41 so that more Pd surface sites are available for the catalytic reaction. The strong metal support interaction between Pd and TiO2 can be induced by high temperature treatments, which suppresses the surface adsorption of both acetylene and ethylene, leading to decreased acetylene conversion and improved ethylene selectivity. The high temperature treatment also helps improve the stability of the catalysts.
50 Ppm of Pd Dispersed on Ni(OH)2 Nanosheets Catalyzing Semi-Hydrogenation of Acetylene with High Activity and Selectivity

Mingzhen Hu,Jian Zhang,Wei Zhu,Zheng Chen,Xin Gao,Xianjun Du,Jiawei Wan,Kebin Zhou,Chen,Yadong Li

DOI: https://doi.org/10.1007/s12274-017-1701-5

IF: 9.9

2017-01-01

Nano Research

Abstract:We report a highly efficient Pd/Ni(OH)2 catalyst loaded with ultra-low levels of palladium (50 ppm Pd by mass) for the selective hydrogenation of acetylene to ethylene. The turnover frequency for acetylene conversion over the 0.005% Pd/Ni(OH)2 catalyst is twice that of the equivalent 0.8% Pd/Ni(OH)2 catalyst. Notably, an acetylene-to-ethylene selectivity of 80% was achieved over a wide range of temperatures. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy was used to reveal the atomically dispersed nature of palladium in the 0.005% Pd/Ni(OH)2 catalyst. The excellent selectivity of this catalyst is attributed to its atomically dispersed Pd sites, while the abundant hydroxyl groups of the support significantly enhance the acetylene conversion activity. This work opens up innovative opportunities for new types of highly efficient catalysts with trace noble-metal loadings for a wide variety of reactions.
Unveiling the Origin of Enhanced Catalytic Performance of NiCu Alloy for Semi-Hydrogenation of Acetylene

Zhengwen Li,Jingpeng Zhang,Jiaming Tian,Kai Feng,Zhao Jiang,Binhang Yan

DOI: https://doi.org/10.1016/j.cej.2022.138244

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Ni-based bimetallic catalysts are widely explored for semi-hydrogenation of acetylene due to their enhanced catalytic performance. However, the comprehensive understanding of performance promoted by Ni-based alloy still remains elusive to date. Herein, supported NiCu/ZrO2 catalysts were fabricated to unveil the origin of improved selectivity and stability. Owing to the electronic and geometric modification of active Ni sites by Cu atoms, NiCu/ZrO2 ensures weak adsorption of key intermediates and easy desorption of ethylene, leading to an improved selectivity towards ethylene. DFT calculations indicate that both the activation barriers for the acetylene deep dehydrogenation pathway and the CC bond cleavage pathway on NiCu alloy are higher, suggesting that NiCu/ZrO2 would show superior stability over Ni/ZrO2. Therefore, the I-D/I-G ratio obtained via in-situ Raman, which represents the anti-coking ability of catalysts, can be employed as a descriptor of catalytic stability. These findings bring new insight for designing efficient heterogeneous catalysts for selective hydrogenation.
Acetylene-Selective Hydrogenation Catalyzed By Cationic Confined In Zeolite

Yuchao Chai,Guangjun Wu,Xiaoyan Liu,Yujing Ren,Weili Dai,Chuanming Wang,Zaiku Xie,Naijia Guan,Landong Li

DOI: https://doi.org/10.1021/jacs.9b03361

IF: 15

2019-01-01

Journal of the American Chemical Society

Abstract:The selective hydrogenation of alkynes to alkenes is an important type of organic transformation with large-scale industrial applications. This transformation requires efficient catalysts with precise selectivity control, and palladium-based metallic catalysts are currently employed. Here we show that four-coordinated cationic nickel(II) confined in zeolite can efficiently catalyze the selective hydrogenation of acetylene to ethylene, a key process for trace acetylene removal prior to the polymerization process. Under optimized conditions, 100% acetylene conversion and an ethylene selectivity up to 97% are simultaneously achieved. This catalyst system also exhibits good stability and recyclability for potential applications. Spectroscopy investigations and density functional theory calculations reveal the heterolytic dissociation of hydrogen molecules and the importance of hydride and protons in the selective hydrogenation of acetylene to ethylene. This work provides an efficient strategy toward active and selective zeolite catalysts by utilizing the local electrostatic field within the zeolite confined space for small-molecule activation and by linking heterogeneous and homogeneous catalysis.
Homogeneous Ni Single-Atom Sites in the NiZn Intermetallic Nanostructure for Efficient Semihydrogenation of Acetylene

Huiran Zhou,Huigen Fu,Bingxin Li,Xinyu Yan,Yang Su,Xiaoli Pan,Qinghu Tang,Xiaobing Wang,Xiaohua Zhao,Yang Liu,Zongxian Yang,Zhansheng Lu,Xiangdong Lou,Lin Li

DOI: https://doi.org/10.1021/acssuschemeng.3c01036

IF: 8.4

2023-07-19

ACS Sustainable Chemistry & Engineering

Abstract:Catalytic semihydrogenation of acetylene is crucial for ethylene purification but still faces a grand challenge in circumventing deep hydrogenation and oligomerization so far, especially for the cost-effective catalysts. Herein, two Ni-based intermetallic nanocatalysts with different atomic arrangements were subtly constructed via controlling the reduction temperature of ZnO-supported NiO particles. The one reduced at 400 °C is L12-type intermetallic Ni3Zn with separated Ni3 trimers (denoted as Ni/ZnO-R400 or Ni3Zn/ZnO); another reduced at 600 °C is L10-type intermetallic NiZn with the homogeneous Ni single atoms completely isolated by Zn atoms (denoted as Ni/ZnO-R600 or NiZn/ZnO). The systematical evaluations validate NiZn/ZnO as an outstanding noble metal-free catalyst for acetylene semihydrogenation, showing a significantly enhanced selectivity toward ethylene relative to Ni3Zn/ZnO (87.5 vs −275.4% at 200 °C) through suppressing not only the unselective hydrogenation to ethane but also carbon deposition. According to catalytic evaluations with or without ethylene, microcalorimetry, and density functional theory calculations, the superior selectivity of NiZn/ZnO stems from the noncompetitive adsorption between the moderately σ-bonded acetylene over two neighboring Ni single atoms and weakly π-bonded ethylene on Ni single-atom sites due to its unique Ni–Zn–Ni ensemble.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Efficient Catalysis of Acetylene Semi-Hydrogenation through Synergistic Action of Supported Ionic Liquid-Nickel Catalyst

Yicheng Chen,Qianjun Zhang,Fan Zhang,Zile Li,Yongkang Zhou,Yingxue Qin,Longyu Xu,Feng Feng,Qingtao Wang,Qunfeng Zhang,Xiaonian Li

DOI: https://doi.org/10.1016/j.apcata.2024.119775

IF: 5.723

2024-05-08

Applied Catalysis A General

Abstract:In the semi-hydrogenation of acetylene, nickel-based catalysts offer a promising alternative to precious metal palladium catalysts. Despite the positive hydrogenation activity of nickel-based catalysts, there is still room for improvement in terms of their selectivity and stability. In this study, a simple incipient wetness impregnation method was employed to prepare Ni(OAC) 2 -IL/Al 2 O 3 catalyst and its performance in the selective hydrogenation of acetylene was investigated. It was found that under the conditions of 170 °C and a space velocity of 600 h -1 , the 3% Ni(OAC) 2 -IL/Al 2 O 3 catalyst achieved a 95.3% acetylene conversion with an 85.6% ethylene selectivity. Furthermore, the catalyst exhibited outstanding stability over a 100 hour test. TEM, XPS and C 2 H 4 -TPD experiments showed that the Ni species were encapsulated in the ionic liquids (ILs), and the interaction between the metal ions, nickel, and the ILs ensured a high dispersion and stability of the actives on the carriers, and the electronic effect between the ionic nickel and the ionic liquids increased the electron cloud density of the Ni, which improved the catalyst selectivity, which is the main reason for its excellent catalytic performance.

chemistry, physical,environmental sciences
Preparation of MCM-41 supported Ni@Pd core-shell nanocatalysts by ultrasound-assisted galvanic replacement and their efficient catalytic dehydrogenation of dodecahydro-N-ethylcarbazole

Ziting Liu,Zhaolu Feng,Xuefeng Bai

DOI: https://doi.org/10.1016/j.colsurfa.2023.132277

2023-08-25

Abstract:N-ethylcarbazole (NEC) is one of the most promising liquid organic hydrogen carriers (LOHCs) due to its low dehydrogenation enthalpy. The development of an efficient catalyst for the dehydrogenation of dodecahydro-N-ethylcarbazole (H 12 -NEC) is the key to the large-scale application of LOHCs. In this paper, Ni/MCM-41 was prepared by chemical reduction method using MCM-41 as the carrier, and then MCM-41 loaded Ni n @Pd 1 core-shell nanocatalysts (Ni n @Pd 1 /M41) were prepared by ultrasound-assisted galvanic replacement method using Ni as the templating agent and reducing agent. It was shown that there was electron transfer between Ni and Pd, and SMSI effect of Ni n @Pd 1 with MCM-41 by the characterization results of Ni n @Pd 1 /M41, which promoted the catalytic performance. H 12 -NEC dehydrogenation efficiency over Ni 6 @Pd 1 /M41 reached 100% at 180 °C for 4 h and at 170 °C for 6 h, and 97.58% for 6 h at 160 °C, and TOF was 5080.6 h −1 , which was better than that reported in the literature. The excellent catalytic dehydrogenation performance of Ni 6 @Pd 1 /M41 can mainly be attributed to the synergistic effect of coordination and strain effects between the bimetals.

chemistry, physical
Acetylene carbonylation over Ni-containing catalysts: role of surface structure and active site distribution

Hao Xie,Tiejun Lin,Li Shi,Xuan Meng

DOI: https://doi.org/10.1039/c6ra17567h

IF: 4.036

2016-01-01

RSC Advances

Abstract:Traditional homogeneous catalyst with heterogeneous Ni catalysts (Ni-ZSM-5, Ni-IM-5 and Ni-MCM-41) for acetylene carbonylation. Using proper parameters to confirm the influence of surface structure and active site distribution on performance.

chemistry, multidisciplinary
Enhancing both selectivity and coking-resistance of a single-atom Pd1/C3N4 catalyst for acetylene hydrogenation

Xiaohui Huang,Yujia Xia,Yuanjie Cao,Xusheng Zheng,Haibin Pan,Junfa Zhu,Chao Ma,Hengwei Wang,Junjie Li,Rui You,Shiqiang Wei,Weixin Huang,Junling Lu

DOI: https://doi.org/10.1007/s12274-016-1416-z

IF: 9.9

2017-02-20

Nano Research

Abstract:Selective hydrogenation is an important industrial catalytic process in chemical upgrading, where Pd-based catalysts are widely used because of their high hydrogenation activities. However, poor selectivity and short catalyst lifetime because of heavy coke formation have been major concerns. In this work, atomically dispersed Pd atoms were successfully synthesized on graphitic carbon nitride (g-C3N4) using atomic layer deposition. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) confirmed the dominant presence of isolated Pd atoms without Pd nanoparticle (NP) formation. During selective hydrogenation of acetylene in excess ethylene, the g-C3N4-supported Pd NP catalysts had strikingly higher ethylene selectivities than the conventional Pd/Al2O3 and Pd/SiO2 catalysts. In-situ X-ray photoemission spectroscopy revealed that the considerable charge transfer from the Pd NPs to g-C3N4 likely plays an important role in the catalytic performance enhancement. More impressively, the single-atom Pd1/C3N4 catalyst exhibited both higher ethylene selectivity and higher coking resistance. Our work demonstrates that the single-atom Pd catalyst is a promising candidate for improving both selectivity and coking-resistance in hydrogenation reactions.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Acetylene selective hydrogenation on carbon nanoutbes supported Ni-based catalyst

Chang-yuan HU,Wu-mao DUAN,Feng-yi LI,Rong-fa ZHANG,Xiang-ming HE,Ting-zhi LIU

DOI: https://doi.org/10.3321/j.issn:0253-4320.2007.08.007

2007-01-01

Abstract:Ni/CNTs catalyst, NiB and NiB/CNTs amorphous alloy catalysts were prepared by the impregnation, chemical reduction and impregnation-chemical reduction method with ultrasonic bath, respectively. Heat treatment was carried out to crystaUize NiB/CNTs amorphous alloy catalyst under highly pure nitrogen. These catalysts were characterized, and evaluated in acetylene selective hydrogenation with an atmospheric micro-reactor. Experimental results showed that catalytic activities of NiB/ CNTs amorphous alloy catalyst were superior to these of Ni/CNTs and crystallized NiB/CNTs catalysts. Over the NiB/CNTs amorphous alloy catalyst, acetylene conversion was still higher than 80 percent after 650 minutes of time-on-stream experiment that it was catalytically stable in the acetylene selective hydrogenation. Furthermore, the selectivity of C2H6 decreased gradually in the time-on-stream experiment and fluctuated around 7.5 percent in the long run. The selectivity of C2H4, however, increased gradually in the time-on-stream experiment and fluctuated around 55 percent in the long run.
Ni-Exchanged Y-Zeolite. an Efficient Heterogeneous Catalyst for Acetylene Hydrocarboxylation

Tie Jun Lin,Xuan Meng,Li Shi

DOI: https://doi.org/10.1016/j.apcata.2014.07.036

2014-01-01

Abstract:A series of Ni-modified Y-zeolites with varying Ni loading in the presence of cupric salt as promoter were studied for acetylene hydrocarboxylation performed in a batch reactor. The catalysts were characterized by elemental analysis, H-2-TPR, XRD, NH3-TPD, pyridine-FTIR, SEM, TG-DTG and Raman. It was found that the catalytic activity showed a pronounced dependence on the supports, metal introduction method, promoters and reaction conditions. The nickel species present as charge compensation cations in the zeolite framework constitute the active sites, and the acid sites help to promote the performance of carbonylation. Moreover, two types of coke were observed, and the remarkable reusability of NiY is attributable to the location of the coke outside the zeolite crystals. High catalytic performance was obtained over a NiY(7.0) catalyst with 62 g(acrylic acid)/(g(cat). h) of yield at 235 degrees C,3.6 MPa of initial total pressure and 0.8 mM/l of cupric bromide within 40 min of reaction time. This is the most effective heterogeneous system for synthesizing acrylic acid by carbonylation of acetylene to date. (C) 2014 Elsevier B.V. All rights reserved.
Enhancing Both Selectivity and Coking-Resistance of a Single-Atom Pd 1 /C 3 N 4 Catalyst for Acetylene Hydrogenation

Xiaohui Huang,Yujia Xia,Yuanjie Cao,Xusheng Zheng,Haibin Pan,Junfa Zhu,Chao Ma,Hengwei Wang,Junjie Li,Rui You,Shiqiang Wei,Weixin Huang,Junling Lu

DOI: https://doi.org/10.1007/s12274-016-1416-z

IF: 9.9

2017-01-01

Nano Research

Abstract:Selective hydrogenation is an important industrial catalytic process in chemical upgrading, where Pd-based catalysts are widely used because of their high hydrogenation activities. However, poor selectivity and short catalyst lifetime because of heavy coke formation have been major concerns. In this work, atomically dispersed Pd atoms were successfully synthesized on graphitic carbon nitride (g-C3N4) using atomic layer deposition. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) confirmed the dominant presence of isolated Pd atoms without Pd nanoparticle (NP) formation. During selective hydrogenation of acetylene in excess ethylene, the g-C3N4-supported Pd NP catalysts had strikingly higher ethylene selectivities than the conventional Pd/Al2O3 and Pd/SiO2 catalysts. In-situ X-ray photoemission spectroscopy revealed that the considerable charge transfer from the Pd NPs to g-C3N4 likely plays an important role in the catalytic performance enhancement. More impressively, the single-atom Pd1/C3N4 catalyst exhibited both higher ethylene selectivity and higher coking resistance. Our work demonstrates that the single-atom Pd catalyst is a promising candidate for improving both selectivity and coking-resistance in hydrogenation reactions.
Robust Ni x Sn/ZSM-12 Catalysts with Zeolite as the Support and Sn as the Promoter for Acetylene Semi-hydrogenation

Dashan Wang,Runping Ye,Chong Zhang,Chengkai Jin,Zhang-Hui Lu,Mohsen Shakouri,Bingying Han,Tao Wang,Yihuan Zhang,Rongbin Zhang,Yongfeng Hu,Jian Zhou,Gang Feng

DOI: https://doi.org/10.1021/acs.energyfuels.3c01891

IF: 4.6541

2023-08-21

Energy & Fuels

Abstract:The synthesis of ethylene from semi-hydrogenation of acetylene is significant for the upgrading of coal. Different kinds of materials (SiO2, γ-Al2O3, and ZSM-12)-supported Ni catalysts were prepared and evaluated for the acetylene hydrogenation. It demonstrated that the Ni/ZSM-12 catalyst with synergistic effect of B (Brönsted) acid and L (Lewis) acid sites can promote semi-hydrogenation of acetylene better than those over Ni/SiO2 and Ni/γ-Al2O3 catalysts, in which both only have L acid sites. However, the pure Ni/ZSM-12 still exhibited low selectivity of ethylene and poor stability; thus, the Sn promoter was introduced into the Ni/ZSM-12 catalyst. Due to the geometric and electronic effects, the Ni7Sn/ZSM-12 sample achieves higher yield of ethylene (92.51%) with ethylene selectivity of 92.51% and acetylene conversion of 100% at 250 °C, which is an increase of 19.38% over the samples without Sn addition. Moreover, the stability of the Ni7Sn/ZSM-12 catalyst (100 h) is much better than those catalysts without Sn (14 h). This is because the carbon deposition over the Sn-containing catalyst was light hydrocarbons that could be removed at high temperature while the pure Ni/ZSM-12 catalyst produced heavy hydrocarbons. The outstanding performance of Ni7Sn/ZSM-12 was further illustrated by DFT calculations, which originates from its facilely accessible hydrogen dissociation, lower ethylene adsorption energy, and higher energy barrier for the formation of C2H5* intermediate.

energy & fuels,engineering, chemical
Supported Ni Catalysts: Simple Vapor Deposition Preparation Method and Improved Catalytic Performance for Oxidative Dehydrogenation of Ethane

Xufeng Lin,Yanjun Ren,Huimin Zhuang,Guozeng Ren,Yixuan Zhang,Yanyan Xi

DOI: https://doi.org/10.1021/acsomega.3c04000

IF: 4.1

2023-09-25

ACS Omega

Abstract:Developing new methods of catalyst preparation is one of the most important tasks in the field of catalysis. A simple one-tube vapor deposition (VD) is provided in this paper for preparing the supported Ni catalyst. Ni(acac)(2) was used as the Ni precursor. This preparation method was successfully applied to three types of catalytic supports, that is, Al(2)O(3) and zeolites 5A and Hβ. Varying Ni contents of less than 8 wt % can be obtained by employing different conditions. The Ni content,...

chemistry, multidisciplinary

Catalytic performance and deactivation of Ni/MCM-41 catalyst in the hydrogenation of pure acetylene to ethylene

Acid-Resistant Performance of Ni-Based Hydrogenation Catalysts Supported by Hydrophobic Activated Carbon

Enhancement of Acetylene Hydrogenation Activity over Ni–Zn Bimetallic Catalyst by Doping with Au

Catalytic Decarbonylation Of Stearic Acid To Hydrocarbons Over Activated Carbon-Supported Nickel

An efficient NiCu@C/Al 2 O 3 catalyst for selective hydrogenation of acetylene

Semi-Hydrogenation of Acetylene to Ethylene Catalyzed by Bimetallic CuNi/ZSM-12 Catalysts

Carbon nitride with encapsulated nickel for semi-hydrogenation of acetylene: pyridinic nitrogen is responsible for hydrogen dissociative adsorption

Atomic Layer Deposited Palladium Nanoparticle Catalysts Supported on Titanium Dioxide Modified MCM-41 for Selective Hydrogenation of Acetylene

50 Ppm of Pd Dispersed on Ni(OH)2 Nanosheets Catalyzing Semi-Hydrogenation of Acetylene with High Activity and Selectivity

Unveiling the Origin of Enhanced Catalytic Performance of NiCu Alloy for Semi-Hydrogenation of Acetylene

Acetylene-Selective Hydrogenation Catalyzed By Cationic Confined In Zeolite

Homogeneous Ni Single-Atom Sites in the NiZn Intermetallic Nanostructure for Efficient Semihydrogenation of Acetylene

Efficient Catalysis of Acetylene Semi-Hydrogenation through Synergistic Action of Supported Ionic Liquid-Nickel Catalyst

Preparation of MCM-41 supported Ni@Pd core-shell nanocatalysts by ultrasound-assisted galvanic replacement and their efficient catalytic dehydrogenation of dodecahydro-N-ethylcarbazole

Acetylene carbonylation over Ni-containing catalysts: role of surface structure and active site distribution

Enhancing both selectivity and coking-resistance of a single-atom Pd1/C3N4 catalyst for acetylene hydrogenation

Acetylene selective hydrogenation on carbon nanoutbes supported Ni-based catalyst

Ni-Exchanged Y-Zeolite. an Efficient Heterogeneous Catalyst for Acetylene Hydrocarboxylation

Enhancing Both Selectivity and Coking-Resistance of a Single-Atom Pd 1 /C 3 N 4 Catalyst for Acetylene Hydrogenation

Robust Ni x Sn/ZSM-12 Catalysts with Zeolite as the Support and Sn as the Promoter for Acetylene Semi-hydrogenation

Supported Ni Catalysts: Simple Vapor Deposition Preparation Method and Improved Catalytic Performance for Oxidative Dehydrogenation of Ethane