Abstract:Introduction: During severe plastic deformation (SPD) processing, aluminum alloys exhibit moderate strength and ductility. Nevertheless, the materials' ductility, as determined by tensile testing, does not accurately represent their capacity for plastic deformation. After the tensile test, its material, aluminum alloy 5083, was observed to be super ductile. Method: The results of a more thorough plasticity analysis—applied for the first time to material following SPD processing—are presented in this paper. The aluminum alloy 5083 is examined in the patent both before and after equal channel angular pressing (ECAP). A highly effective aluminum alloy 5083 specimen preparation was suggested. Under heated temperatures, the process involves severe plastic deformation. Optical microscopy and scanning electron microscopy (SEM) were used for micro-structural research in order to look at the distribution of second-phase particles and the evolution of grain structure. Furthermore, Vickers micro-hardness testing was utilized to assess the mechanical characteristics of the alloy after processing. The outcomes showed that after ECAP processing, there was a significant decrease in grain size and an increase in micro-hardness. Result: Additionally, the production of a finer microstructure with a more uniform distribution of strengthening precipitates was clarified by electron microscopy (SEM). The micro-structural evolution and mechanical behavior of aluminum alloy 5083 under ECAP are well-explained in this patent, which may lead to improved performance in structural applications. This method can be used to forecast fractures in plastic deformation processes and estimate the final plasticity of the materials for various stress-strain states after ECAP processing, as well as the mechanical properties discussed. Conclusion: Due to its unique mechanical qualities, aluminum alloy 5083 shows great potential in a variety of structural applications. The effects of Equal Channel Angular Pressing (ECAP) on the hardness and microstructure of aluminum alloy 5083 were examined in this patent work. result: The specimen's mechanical characteristics are at their finest following a single deformation when the temperature reaches 300°C. Compared to the original specimen, the tensile strength observed enhanced after the fourth pass, and breaking elongation (28.3%) was improved. Through second-phase strengthening and fine-tuning, the recrystallized grains and second-phase particles increase the material's strength.

Strengthening of AA5754 Aluminum Alloy by DRECE Process Followed by Annealing Response Investigation

Dual rolls equal channel extrusion as unconventional SPD process of the ultralow-carbon steel: finite element simulation, experimental investigations and microstructural analysis

Microstructure and mechanical properties of 7005 aluminum alloy processed by one-pass equal channel reciprocating extrusion

Cyclic Extrusion Compression Process for Achieving Ultrafine-Grained 5052 Aluminum Alloy with Eminent Strength and Wear Resistance

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

Investigating the Influence of Thermomechanical Equal Channel Angular Pressing (ECAP) Improved Die on AA-6061

Preparing Mg-6Al alloy with high mechanical properties and fine grains by equal channel angular extrusion

Effect of extrusion-ECA integrated large strain technology on microstructure and properties of 7075 aluminum alloy

Development of Low-Weight and High-Strength AA6005A Extrudates Intended for Modern Architecture and Design of Innovative Die for Extrusion Process

Mechanical Properties of High Strength Aluminum Alloy EN AW-7075 Additively Manufactured by Directed Energy Deposition

Directed energy deposition of Al-Mg-Si alloys with fully-equiaxed microstructure and isotropic high strength/ductility

Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing

Strengthening mechanisms of Al wires processed by equal channel angular torsion drawing

Suppress Defect-Induced Plastic Instability to Achieve Superior Strength-Ductility Combination of Spray Formed 7050 Al Alloy

Enhanced Mechanical Properties in 6082 Aluminum Alloy Processed by Cyclic Deformation

Extrusion Processing of High-Strength Al Alloy 7055

Preparation of high performance 5083 aluminum alloy by alternate ring-groove pressing and torsion

Influence of Equal Channel Angular Pressing Technique on Mechanical Properties, Corrosion Resistance, and Microstructural Behavior of Al-Alloy 5083

Deep Drawability of Al-Mg Alloys Produced by Twin Roll Continuous Casting Method: Investigation of Microstructure and Mechanical Properties

Improving mechanical properties of AZ31 alloy sheets via novel turned-bearing extrusion by introducing shear strain

Achieving Outstanding Combination of Strength and Ductility of the Al-Mg-Li Alloy by Cold Rolling Combined with Electropulsing Assisted Treatment