Abstract:In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage; the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.

Structural effects of temperature gradient on a continuous prestressed concrete girder bridge: analysis and field measurements

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Temperature Effects on Strains of A Continuous Box-Girder Bridge with A Long-Term Monitoring System

Analysis of Vertical Temperature Gradients and Their Effects on Hybrid Girder Cable-Stayed Bridges

Temperature Field Characteristics and Cooling Measures of Steel Box Girder of Cross-Sea Bridge

Temperature Field Boundary Conditions and Lateral Temperature Gradient Effect on a PC Box-Girder Bridge Based on Real-Time Solar Radiation and Spatial Temperature Monitoring

Experimental and statistical investigation on temperature gradient of CFST truss chords

Thermal Effect on Dynamic Characteristics of Concrete Girder Bridges

Effect analysis of temperature in the large continuous rigid frame bridge

Study on Temperature Gradient of Concrete Box Girder of Continuous Rigid Frame Bridge over Humen Auxiliary Navigation Pass of Guangdong Province

Temperature Numerical Analysis of A Large Rigid-Continuous Concrete Bridge

The Effect of Cold Waves on the Structural Performance of Concrete Box Girders

Effect of Non-Uniform Temperature Distribution on the Natural Frequency of Concrete Girder Bridges

Effect of Temperature on Modal Variability of a Curved Concrete Bridge under Ambient Loads

Insights into temperature effects on structural deformation of a cable-stayed bridge based on structural health monitoring

Effect of Asphalt Bridge Deck Pavement Depth on Beam Temperature Gradient Stress of Continuous Rigid Frame Bridges

Investigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data

Temperature effects on cable stayed bridge using health monitoring system: a case study