Abstract:In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage; the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.

Effect analysis of temperature in the large continuous rigid frame bridge

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Temperature Numerical Analysis of A Large Rigid-Continuous Concrete Bridge

ANALYSIS OF TRANSVERSE THERMAL STRESS OF LARGE SPAN CONCRETE BOX GIRDER

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

Study on Temperature Gradient of Concrete Box Girder of Continuous Rigid Frame Bridge over Humen Auxiliary Navigation Pass of Guangdong Province

Effect of Asphalt Bridge Deck Pavement Depth on Beam Temperature Gradient Stress of Continuous Rigid Frame Bridges

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Thermal Simulation on the Flat Steel Box Girder of the Maputo Bridge under Solar Radiation

Analysis of Vertical Temperature Gradients and Their Effects on Hybrid Girder Cable-Stayed Bridges

THERMAL STRESS ANALYSIS OF HYBRID FRP-CONCRETE BRIDGE SUPERSTRUCTURE

Temperature Field Determination of Long-span Continuous Box-girder Bridges in Construction Period and Analysis of Its Effect

Thermal Effect on Dynamic Characteristics of Concrete Girder Bridges

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Investigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data