Abstract:The real temperature distribution within 24 h of the main beam in a single-tower hybrid beam cable-stayed bridge is analysed according to its actual section and material parameters, as well as other factors of local atmospheric temperature, geographical environment, and solar intensity. The results show that the internal temperature distribution in the steel–concrete composite beam is uneven, and the temperature of the steel is higher than that at the surface of the concrete slab. Then, a finite element model of the whole bridge is established using the thermal–mechanical sequential coupling function in ABAQUS to acquire the structural response under the action of a 24-h temperature field. The results show that the vertical temperature gradients have a great influence on the longitudinal stress in the lower flange of the steel I-beam, with a maximum compressive stress of 11.9 MPa in the daytime and a maximum tensile stress of 13.36 MPa at midnight. The temperature rise leads to a downward deflection of the main span, and the maximum deflection occurs at the 1/4 main span. There was an obvious temperature gradient in the concrete slab, with a difference between the maximum and minimum value of 14 °C. Similarly, the longitudinal compressive stress of the concrete slab increases with increasing temperature in the daytime, but the peak time is obviously inconsistent with that of the steel beam.

Effect of Asphalt Bridge Deck Pavement Depth on Beam Temperature Gradient Stress of Continuous Rigid Frame Bridges

Investigation of the Fatigue Stress of Orthotropic Steel Decks Based on an Arch Bridge with the Application of the Arlequin Method

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Load Analysis on Asphalt Concrete Deck Pavement With Submodel Method

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Temperature Field Characteristics and Cooling Measures of Steel Box Girder of Cross-Sea Bridge

Research on Effect of Bridge-deck Pavement on Temperature Gradient

Effect analysis of temperature in the large continuous rigid frame bridge

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Analysis of Vertical Temperature Gradients and Their Effects on Hybrid Girder Cable-Stayed Bridges

Thermally Induced Stresses in Concrete Pavement on Concrete Bridge

Study on Temperature Gradient of Concrete Box Girder of Continuous Rigid Frame Bridge over Humen Auxiliary Navigation Pass of Guangdong Province

Thermal Effect on Rheological Properties of Epoxy Asphalt Mixture and Stress Prediction for Bridge Deck Paving

Numerical analysis about mechanical behavior of concrete bridge deck pavement

Temperature Field Boundary Conditions and Lateral Temperature Gradient Effect on a PC Box-Girder Bridge Based on Real-Time Solar Radiation and Spatial Temperature Monitoring

Temperature Effects on Strains of A Continuous Box-Girder Bridge with A Long-Term Monitoring System

Effect of Temperature on the Fatigue Life Assessment of Suspension Bridge Steel Deck Welds under Dynamic Vehicle Loading

Analysis on Stress Influence of Thickness of Deck Pavement on Structure Force under Sunlight Nonlinear Temperature Difference

THERMAL STRESS ANALYSIS OF HYBRID FRP-CONCRETE BRIDGE SUPERSTRUCTURE