Tribological Performance of Cu–rGO–MoS2 Nanocomposites Under Dry Sliding

Hemant Nautiyal,Sangita Kumari,U. S. Rao,Rajnesh Tyagi,Om P. Khatri

DOI: https://doi.org/10.1007/s11249-020-1270-8

2020-01-22

Tribology Letters

Abstract:Nanostructured MoS₂ grown on reduced graphene oxide (rGO–MoS₂) is demonstrated as a lubricating reinforcement material for copper matrix composite. The Cu–rGO–MoS₂ nanocomposites having variable dosages of rGO–MoS₂ (0.5 to 2.0 wt%) are prepared via a combinational approach of powder metallurgy and then spark plasma sintering at 700 °C. The XRD and Raman analyses suggested the preparation of rGO–MoS₂ hybrid, whereas HRTEM images revealed the thorough distribution of MoS₂ nanosheets over the rGO. The tribological properties of Cu–rGO–MoS₂ nanocomposites were evaluated against the EN 31 steel ball under the variable loads (4–10 N). The coefficient of friction was found to decrease with increasing of rGO–MoS₂ content. The Cu–rGO–MoS₂ nanocomposite with a 2.0 wt% of rGO–MoS₂ hybrid exhibited the lowest and stable coefficient of friction (<i>μ</i> = 0.2) among all the nanocomposites. The high mechanical strength and low shearing properties driven by the lamellar structure of rGO–MoS₂ furnished the self-lubricating properties to Cu–rGO–MoS₂ nanocomposites. A combination of adhesion, oxidation, abrasion, and delamination of materials are revealed as major events for the wear mechanisms. These wear events are governed by the dosage of rGO–MoS₂ reinforcement in the Cu–rGO–MoS₂ nanocomposites and applied load. The results indicate that rGO–MoS₂ has the potential to be used as a solid lubricant in the metal matrix composites.

engineering, chemical, mechanical