Abstract:Soft metal Cu nanoparticles were hybrided on the surface of graphene (Cu/RGO nanohybrid) by a facile in situ reduction method for nano-enhancing the tribological, mechanical, and thermal properties of phenolic resin (PF) nanocomposites. It shows the nano-Cu can be uniformly attached on the RGO lamellae with evenly spread out structure. With enhanced dispersion, the Cu/RGO nanohybrid presented effectively synergistic effect of friction-reducing and wear-resisting in the paraffin oil. This Cu/RGO filling PF nanocomposites also displayed better mechanical performance and higher thermal stability than single RGO or nano-Cu for the good dispersion and interfacial compatibility of Cu/RGO nanohybrid in PF matrix, which could prevent the generation and propagation of cracks, bear much more shear stress, and suppress the chain segment movement and decomposition of PF. With the addition of 2.0 wt% Cu/RGO nanohybrid, friction coefficient and wear rate of the PF nanocomposites were reduced by 23.7% and 32.5%, respectively. This synergistic friction reduction and anti-wear effect of Cu/RGO nanohybrid in PF matrix could be reasoned by the comprehensive promotion of dispersity, interfacial compatibility, mechanical, and thermal performance of the nanocomposites. Morphology of wear surface indicates the main wear mode changed from the severe fatigue wear, adhesive wear, and abrasive wear of pure PF to slight abrasive wear and adhesive wear of Cu/RGO/PF composites. Based on the analysis of friction and wear schematic, the synergistic wear resistance mechanism of Cu/RGO nanohybrid in PF matrix was concluded by the good dispersion, high surface activity, and microscopic interlayer slippage of the RGO-loaded nano-Cu, which would facilitate the formation of complete and stable friction transfer film. This simple soft metal nanoparticles loading graphene strategy could provide some effective references of designing and optimizing nanomaterials for improving the tribological, mechanical, and thermal performance of polymer-based nanocomposites. Facile in situ prepared Cu/RGO nanohybrid presented good dispersion and synergistic friction-reducing and wear-resisting performance.Graphic Abstract

Enhancement on the Tribological Properties of the Multilayer RGO/Al Matrix Composites by Cu-Coating Method

Excellent Tribological Properties of Lower Reduced Graphene Oxide Content Copper Composite by Using a One-Step Reduction Molecular-Level Mixing Process

Synthesis Of Reduced Graphene Oxide/Cu Nanoparticle Composites And Their Tribological Properties

Tribological Performance of Cu–rGO–MoS2 Nanocomposites Under Dry Sliding

Microstructural, mechanical and tribological characteristics of reduced graphene oxide (rGO) reinforced nanostructured Al2O3-13wt. %TiO2 coatings

Friction Reduction of Aluminum Alloy Micro-arc Oxidation Coating by Filling Graphene Oxide

Tribological Properties of Carbonized Polydopamine/rgo Composite Coatings

Enhanced mechanical and tribological properties of copper matrix composites reinforced by copper-coated graphite and Ti3AlC2

Research on the performance of rGO-CNTs synergistically enhanced copper matrix composites

The Development of Novel Cu/GO Nano-Composite Coatings by Brush Plating with High Wear Resistance for Potential Brass Sliding Bearing Application

On the tribological behaviors of Cu matrix composites with different Cu-coated graphite content

Fabrication of In Situ rGO Reinforced Ni-Al Intermetallic Composite Coatings by Low Pressure Cold Spraying with Desired High Temperature Wear Characteristics

Microstructure and tribological properties of titanium matrix nanocomposites through powder metallurgy using graphene oxide nanosheets enhanced copper powders and spark plasma sintering

Characterization and Tribological Properties of Graphene/Copper Composites Fabricated by Electroless Plating and Powder Metallurgy

Dry Sliding Tribological Behaviors of Electrodeposited Ni-GO/SiC Composite Coating on the 2218 Aluminum Alloy

Study on the tribological properties of MoB/Cu laminated composite materials fabricated by hot-pressing process

Enhancement mechanism of carbon fiber on the current-carrying tribological properties of Cf-Al2O3/Cu composites

Highly efficient enhancement of mechanical and tribological properties of Cu-based composites by addition of graphene-loaded Ni metal particles

Facile in situ preparation of Cu/RGO nanohybrid for enhancing the tribological performance of phenolic resins nanocomposites

Nano/microstructures and mechanical properties of Al2O3–TiC ceramic composites reinforced with Al2O3@RGO nanohybrids

Tribology of Copper Metal Matrix Composites Reinforced with Fluorinated Graphene Oxide Nanosheets: Implications for Solid Lubricants in Mechanical Switches