Abstract:Nanoparticles significantly provides many powerful functions and a friendly use to improve the tribological performance of sliding components lubricating oil additives. Nevertheless, most analysis for the lubrication mechanism of nanoparticles is based on experimental phenomena, which is fuzzy to verify the lubrication mechanism with direct evidence, and further, it is difficult to design the lubrication efficiency according to the requirements.In order to investigate the synergistic mechanism of friction reduction and anti-wear mechanism for graphene loading copper nanoparticles（RGO/Cu）, the motion state of RGO/Cu between friction pairs is studied from the micro point of view, the lubrication mechanism of RGO/Cu as lubricant additives is analyzed. In this study, the molecular dynamics model of Cu-Cu tribo-pairs with three-layer and single-layer RGO/Cu and liquid argon as the basic fluid was established based on the molecular dynamics theory. The Lennard-Jones（LJ） potential function was used to describe the interactions between AR-AR, AR-C, AR-Cu and C-Cu atoms, the EAM potential function was used to describe the Cu-Cu interaction, and the Teroff potential function was used to describe the C-C interaction force. The Velocity Verlet algorithm was used to simulate the micro movement and the friction process of RGO/Cu in basic fluid between Cu-Cu tribo-pairs under different loads. The results showed that the movement of copper particles between the tribo-pairs had both translation and rotation, and the copper particles had fission migration, while graphene was only translation, which was easy to adsorb on the surface of the tribo-pairs to form a protective film. Compared with three layers RGO/Cu, single layer RGO/Cu had larger migration and deformation in the basic fluid, and the rotation and migration of copper particles between tribo-pairs were also more intense. With the increase of load, the fission and migration of copper particles became more and more obvious, and some copper atoms falled off and interacted with the tribo-pairs and adhered to the surface of the tribo-pairs.Finally, using paraffin as the base oil, the friction-reduction and anti-wear performance of RGO/Cu additive were verified by experiments. The maximum depth of the RGO/Cu oil lubrication wear scar was43.6% and 16.7% less than that of the base oil and graphene oil, respectively. The widths of the wear scars for the RGO/Cu oil were 62.3% and 55.3% less than that of the base oil and graphene oil, respectively. The mean roughness on the wear scars of the RGO/Cu lubrication were 57.0% and 26.5% less than that of the base oil and graphene oil,respectively. The element C on the friction surface lubricated with RGO/Cu oil increased from 6.00% to 9.07%, and the characteristic element Cu of it increased from 0.11% to 0.37%. The friction coefficient for the RGO/Cu oil tended to decrease with the increase of load. The molecular dynamics theoretical simulation results were consistent with the model experimental results. The theoretical and experimental results showed that high pressure condition was easier to exert synergistic friction-reduction and anti-wear performance for the RGO/Cu additive.

Synthesis Of Reduced Graphene Oxide/Cu Nanoparticle Composites And Their Tribological Properties

Synergistic Effects of Fabrication Techniques and the Interface Structure on the Tribological Properties of Reduced Graphene Oxide/cucr Composites

Boundary and Elastohydrodynamic Lubrication Behaviors of Nano-CuO/Reduced Graphene Oxide Nanocomposite as an Efficient Oil-Based Additive.

One-Pot Synthesis of Alkyl Functionalized Reduced Graphene Oxide Nanocomposites as the Lubrication Additive Enabling Enhanced Tribological Performance

Synthesis of nano-Cu/graphene oxide composites by supercritical CO 2 -assisted deposition as a novel material for reducing friction and wear

Facile in situ preparation of Cu/RGO nanohybrid for enhancing the tribological performance of phenolic resins nanocomposites

Multi-layer interface lubrication of in-situ synthesized titanium dioxide/reduced graphene oxide nanocomposites

A Novel Nanomaterial of Graphene Oxide Dotted with Ni Nanoparticles Produced by Supercritical CO2-Assisted Deposition for Reducing Friction and Wear.

Tribological Behaviors of Cu/RGO/WS2 Composites in Air and Vacuum Environments

Boosting the Tribological Properties by Developing A G-C3n4/rgo Nanocomposite As Lubricant Additive

Molecular Dynamics Simulation of Micro Friction Behavior of Graphene Loading Copper Nanoparticles

Tribological Performance of Cu–rGO–MoS2 Nanocomposites Under Dry Sliding

Tribology Behavior of High-Content Graphene/nanograined Cu Bulk Composites from Core/shell Nanoparticles

Preparation and Lubricating Properties of Poly(vinylidene-Fluoride) Particles Wrapped by Reduced Graphene Oxide

Characterization and Tribological Properties of Graphene/Copper Composites Fabricated by Electroless Plating and Powder Metallurgy

Synthesis of MoSe2/Reduced graphene oxide composites with improved tribological properties for oil‐based additives

Efficient lubrication of alkylated reduced graphene oxide based on tribochemistry

Tailoring the Tribological Properties of Cu Composite Coatings Via Integrating Strengthening W Particles and Lubricant Graphene

Tribology Study of Reduced Graphene Oxide Sheets on Silicon Substrate Synthesized via Covalent Assembly

Excellent Tribological Properties of Lower Reduced Graphene Oxide Content Copper Composite by Using a One-Step Reduction Molecular-Level Mixing Process

Fabrication of Novel CeO2/GO/CNTs Ternary Nanocomposites with Enhanced Tribological Performance