Abstract:Purpose The performance of solid fins inside a differentially heated cubical cavity is numerically studied in this paper. The main purpose of the study is to make an optimization to reach the maximum heat transfer in the enclosure having the solid fins with studied parameters. Design/methodology/approach The considered domain of interest is a differentially heated cube having heat-conducting solid fins placed on the heated wall while an opposite wall is a cooled one. Other walls are adiabatic. Governing equations describing natural convection in the fluid filled cube and heat conduction in solid fins have been written using non-dimensional variables such velocity and vorticity taking into account the Boussinesq approximation for the buoyancy force and ideal solid/fluid interfaces between solid fins and fluid. The formulated equations with appropriate initial and boundary conditions have been solved by the finite difference method of the second of accuracy. The developed in-house computational code has been validated using the mesh sensitivity analysis and numerical data of other authors. Analysis has been performed in a wide range of key parameters such as Rayleigh number (Ra = 10 4 –10 6 ), non-dimensional fins length (l = 0.2–0.8), non-dimensional location of fins (d = 0.2–0.6) and number of fins (n = 1–3). Findings From numerical methods point of view the used non-primitive variables allows to perform numerical simulation of convective heat transfer in three-dimensional (3D) regions with two advantages, namely, excluding difficulties that can be found using vector potential functions and reducing the computational time compared to primitive variables and SIMPLE-like algorithms. From a physical point of view, it has been shown that using solid fins can intensify the heat transfer performance compared to cavities without any fins. Fins located close to the bottom wall of the cavity have a better heat transfer rate than those placed close to the upper cavity surface. At high Rayleigh numbers, increasing the fins length beyond 0.6 leads to a reduction of the average Nusselt number, and one solid fin can be used to intensify the heat transfer. Originality/value The present numerical study is based on hybrid approach for numerical analysis of convective heat transfer using velocity and vorticity that has some mentioned advantages. Obtained results allow intensifying the heat transfer using solid fins in 3D chambers with appropriate location and length.

Investigation of Performance of Fins Geometry on a Vertical Cylinder

Detailed Heat Transfer Measurements of Curved Fin Channels

Natural Convection Heat Transfer along Vertical Cylinder Heat Sinks with Longitudinal Fins

An investigation of the thermal performance of functionally graded annular fins on a horizontal cylinder under natural convection

Use of Cuckoo Search Algorithm for Performance Evaluation of Split Elliptic Shaped Fins for Enhanced Rate of Heat Transfer

Experimental study on natural convection from vertical cylinders with perforated plate fins

Numerical investigation on effects of using segmented and helical tube fins on thermal performance and efficiency of a shell and tube heat exchanger

Thermal performance maximisation in a complex heat exchanger with solid and hollow cylindrical fins

Heat transfer enhancement of a cylinder by flexible fins in turbulent flow

Numerical simulation of natural convection in a differentially heated cubical cavity with solid fins

Numerical Study of Effect of Liquid Viscosity Variation on Fins Surface Performance

Performance Enhancement of Shell and Helical Coil Water Coolers Using Different Geometric and Fins Conditions

Numerical investigations of fluid flow and heat transfer in double forward facing step in the presence of a fin

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Numerical analysis of magneto-radiated annular fin natural-convective heat transfer performance using advanced ternary nanofluid considering shape factors with heating source

Multi-objective optimization of porous fins in closed cavity with heat source of sinusoidal periodic temperature boundary condition

An integrative approach using axial fins, numerical assessment, and experimental data analysis in helical heat exchangers

Numerical investigation of the geometric parameters effect of helical blades installed on horizontal geo heat exchanger

Numerical study on flow and heat transfer characteristics of a novel centrosymmetric tube with bent inner fins based on experiment

Investigation on flow characteristics and its effect on heat transfer enhancement in a wedge channel with combination of circular, oblong, teardrop, and pencil pin fins