Abstract:Using the SST k-ω turbulence model, a comprehensive numerical investigation was conducted to analyze the flow and heat transfer characteristics of steam within an isosceles trapezoidal cooling channel with pin-fin arrays modeled from the trailing edge of a F-class gas turbine high-temperature blade. The influence laws of various parameters, including the Reynolds number (Re, from 10,000 to 50,000), dimensionless pin-fin diameter (d/H, from 0.4 to 0.8), and dimensionless pin-fin spacing (S/H, from 1.6 to 2.4), on the flow and heat transfer performance of the isosceles trapezoidal cooling channel with pin-fin arrays were examined. Sensitivity analysis was employed to determine the relative significance of these influence parameters on the cooling performance of the isosceles trapezoidal channel with pin-fin arrays. Finally, the corresponding heat transfer and friction correlations within the investigated parameter range were developed. The research findings reveal that under different Reynolds numbers, as the dimensionless pin-fin diameter increases from 0.4 to 0.8, the friction factor within the isosceles trapezoidal cooling channel with pin-fin arrays increases by a factor of 3.25 to 3.41, while the overall average Nusselt number improves by 31.05% to 37.41%. Conversely, when the dimensionless pin-fin spacing increases from 1.6 to 2.4, the friction factor within the isosceles trapezoidal cooling channel with pin-fin arrays decreases by 67.38% to 69.18%, accompanied by a reduction in the overall average Nusselt number by 24.95% to 31.14%. When both the flow performance and heat transfer performance are taken into account, the importance of the influence parameters ranks as follows: Reynolds number, pin-fin diameter, and pin-fin spacing. It also suggests that smaller pin-fin diameters and larger pin-fin spacing should be selected in the design stage based on the variation laws of integrated thermal-hydraulic performance. The results may provide valuable references and insights for the design of steam cooling structures within high-temperature turbine blade trailing edge channels in advanced gas turbines.

Investigation on flow characteristics and its effect on heat transfer enhancement in a wedge channel with combination of circular, oblong, teardrop, and pencil pin fins

Experimental and numerical investigation of flow and heat transfer characteristics of teardrop and circular pin fins in a wedge channel

Improving thermal performance of turbine blade with combination of circular and oblong fins in a wedge channel: a numerical investigation

Experimental and Numerical Study of Turbulent Flow and Heat Transfer in a Wedge-shaped Channel with Guiding Pin Fins for Turbine Blade Trailing Edge Cooling

Optimizing Flow and Heat Transfer with Guiding Pin Fins in a Wedge-Shaped Cooling Channel for Gas Turbine Blade Trailing Edge

Flow and Heat Transfer Characteristics in a Rotating Wedge-Shaped Cooling Channel with Detached Guiding Pin-Fin

Numerical Study on Heat Transfer Performance of a New-proposed Pin-fin in an Internal Channel

Thermal performance of teardrop pin fins and zig zag ribs in a wedge channel

Enhanced Thermal Performance of a Pin-Fin Cooling Channel for Gas Turbine Blade by Density-Based Topology Optimization

Numerical investigation of heat transfer characteristics of Pin-Fins with C-Shaped-Recessed endwall in gas turbine blades internal cooling channel

Study on Flow and Heat Transfer Characteristics in Rectangular Channels with Lantern-Shaped Pin Fin Array: Part II-Global Sensitivity Analysis and Optimization

Numerical Study on Flow and Heat Transfer Characteristics of Pin-Fins with Different Shapes

Study on Flow and Heat Transfer Characteristics in Rectangular Channels with Lantern-Shaped Pin Fin Array: Part I- Effect of Sphere Diameter

An experimental and numerical study of flow and heat transfer in channels with pin fin-dimple and pin fin arrays

Numerical Study of a Novel Curved Pin Fin for Heat Transfer Enhancement Within Aeroengine Turbine Blade

Experimental and Numerical Study of the Turbulent Flow and Heat Transfer in a Wedge-Shaped Channel with Guiding Pin Fin Arrays under Rotating Conditions

Effect of truncated pin-fins on flow and heat transfer characteristics with impinging jets on a concave surface

Experiment on Wedge-Shaped Latticework Channel Cooling Applied in Aero Engine Gas Turbine Blade Trailing Edge

Heat Transfer And Pressure Loss Characteristics Of Pin-Fins With Different Shapes In A Wide Channel

Numerical Study on Steam Cooling Characteristics in a Isosceles Trapezoidal Channel with Pin-Fin Arrays at Turbine Blade Trailing Edge

Effect of shape and distribution of pin-fins on the flow and heat transfer characteristics in the rectangular cooling channel