Abstract:Purpose The performance of solid fins inside a differentially heated cubical cavity is numerically studied in this paper. The main purpose of the study is to make an optimization to reach the maximum heat transfer in the enclosure having the solid fins with studied parameters. Design/methodology/approach The considered domain of interest is a differentially heated cube having heat-conducting solid fins placed on the heated wall while an opposite wall is a cooled one. Other walls are adiabatic. Governing equations describing natural convection in the fluid filled cube and heat conduction in solid fins have been written using non-dimensional variables such velocity and vorticity taking into account the Boussinesq approximation for the buoyancy force and ideal solid/fluid interfaces between solid fins and fluid. The formulated equations with appropriate initial and boundary conditions have been solved by the finite difference method of the second of accuracy. The developed in-house computational code has been validated using the mesh sensitivity analysis and numerical data of other authors. Analysis has been performed in a wide range of key parameters such as Rayleigh number (Ra = 10 4 –10 6 ), non-dimensional fins length (l = 0.2–0.8), non-dimensional location of fins (d = 0.2–0.6) and number of fins (n = 1–3). Findings From numerical methods point of view the used non-primitive variables allows to perform numerical simulation of convective heat transfer in three-dimensional (3D) regions with two advantages, namely, excluding difficulties that can be found using vector potential functions and reducing the computational time compared to primitive variables and SIMPLE-like algorithms. From a physical point of view, it has been shown that using solid fins can intensify the heat transfer performance compared to cavities without any fins. Fins located close to the bottom wall of the cavity have a better heat transfer rate than those placed close to the upper cavity surface. At high Rayleigh numbers, increasing the fins length beyond 0.6 leads to a reduction of the average Nusselt number, and one solid fin can be used to intensify the heat transfer. Originality/value The present numerical study is based on hybrid approach for numerical analysis of convective heat transfer using velocity and vorticity that has some mentioned advantages. Obtained results allow intensifying the heat transfer using solid fins in 3D chambers with appropriate location and length.

Multi-objective optimization of porous fins in closed cavity with heat source of sinusoidal periodic temperature boundary condition

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Effect of porous fin parameters on the turbulent natural convection heat transfer in the side-heated cavity containing the internal heat source

Natural Convection Heat Transfer along Vertical Cylinder Heat Sinks with Longitudinal Fins

Numerical Computation of Laminar Natural Convection Heat Transfer Around a Horizontal Compound Tube with External Longitudinal Fins

Sensitivity analysis of natural convection in a porous cavity filled with nanofluid and equipped with horizontal fins using various optimization methods and MRT-LB

Numerical simulation of natural convection in a differentially heated cubical cavity with solid fins

Natural Convection in a Porous Rectangular Enclosure with Sinusoidal Temperature Distributions on Both Side Walls Using a Thermal Non-Equilibrium Model

Numerical Study of Natural Convection Heat Transfer in a Porous Cavity Under Time-periodic Boundary Conditions

Numerical analysis of the hot fin's width effect on natural convection of air enclosed in a 2D complex square cavity

Performance Analysis and Design Optimization of Heat Pipe Sink with a Variable Height Fin Array under Natural Convection

Effect of the Aspect Ratio on Natural Convection in A Porous Cavity with A Sinusoidal Active Thermal Wall

Multi-objective optimization design of internal cooling structure of a sensor probe

Numerical simulation of magnetohydrodynamics double-diffusive natural convection in a cavity with non-uniform heated walls

Convective-radiative fins with simultaneous variation of thermal conductivity, heat transfer coefficient, and surface emissivity with temperature

Numerical simulation of flow instability and heat transfer of natural convection in a differentially heated cavity

Numerical Design of an Efficient Wavy Fin Surface Based on the Local Heat Transfer Coefficient Study

LSM and DTM-Pade approximation for the combined impacts of convective and radiative heat transfer on an inclined porous longitudinal fin

Numerical study on the heat transfer of micro elliptic pin fins in a rectangular minichannel

Numerical Analysis of Melting Process in a Rectangular Enclosure with Different Fin Locations

Analytical solution for evaluating the thermal performance and efficiency of convective–radiative straight fins with various profiles and considering all non-linearities