Abstract:The uncertainty in local structure and time-variable compaction of ballast aggregates poses challenges in selecting suitable stabilization methods and parameters for ballast tracks in practical engineering, often resulting in suboptimal operational outcomes. To address this issue comprehensively, the spatial hybrid model of the double dynamic stabilisers-ballast track (MBD-DEM) is proposed in this paper. Subsequent numerical simulations of stabilisation operations are conducted to elucidate ballast vibration, migration behavior and the evolution of ballast track resistance under varying initial conditions of the ballast bed. Initially, leveraging multibody dynamics theory (MBD) and discrete element method (DEM), a MBD model of double stabilisers and a DEM ballast track model containing 6 sleepers were established respectively. Using the coupling interface, the real-time hybrid calculation of these two models is achieved through 6 sleepers in the middle of the ballast bed. Subsequently, the model's accuracy was validated by comparing test data from stabilisation vehicle operations on a Kunming Railway Bureau test line with simulation data from the dynamic double stabilisers-ballast track spatial hybrid model. Finally, utilizing the proposed hybrid model, the dynamic behavior, contact states, and movement rules of ballast particles during stabilisation operations on both loose and initially stable ballast beds (LBB and ISBB) were investigated at the mesoscopic scale. Concurrently, an in-depth analysis of lateral resistance changes in the ballast bed before and after the stabilisation operation is presented. The relevant findings effectively unveil the evolution of dynamic behavior in the ballast bed during stabilisation operations, concluding with practical suggestions for on-site operations. Simulation results illustrate that the rotation of ballast particles in the XY plane beneath each sleeper is predominantly characterized by harmonic rotation. With an increase in the depth of the ballast bed, the range of the rotation axis for combined angular velocity diminishes, leading to the phenomenon of rotation axis deflection. To ensure operational safety and efficiency, a minimum of two-times stabilization operations is recommended for loose ballast beds (LBB), with three-times operations considered optimal. For initially stable ballast beds (ISBB), one-time stabilization operation is basically sufficient.

Calibration for discrete element modelling of railway ballast: A review

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Hybrid Lattice-discrete element method for ballast modeling

“Critical Particle Size” and Ballast Gradation Studied by Discrete Element Modeling

Coupled discrete-continuum approach for railway ballast track and subgrade macro-meso analysis

Evaluation of Ballast Behavior under Different Tie Support Conditions using Discrete Element Modeling

Review: Calibration of the discrete element method

Numerical modelling of railway ballast at the particle scale

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Performance of Ballast Influenced by Deformation and Degradation: Laboratory Testing and Numerical Modeling

Dynamic Behavior Modeling of Full-Scale High-Speed Ballasted Track Using Discrete Element Method

A numerical framework for modelling settlements of railway ballast layers

Comparison of Laboratory Testing Using SmartRock and Discrete Element Modeling of Ballast Particle Movement

Micromechanical Particle Interactions in Railway Ballast Through DEM Simulations of Direct Shear Tests

Discrete Element Modeling of Full-Scale Ballasted Track Dynamic Responses from an Innovative High-Speed Rail Testing Facility

Macro-and-micromechanical responses of ballast under triaxial shearing using coupled DEM–FDM with flexible and rigid membranes: a comparative study

Mechanical behavior and performance evolution of railway ballast track under dynamic stabiliser based on the hybrid MBD-DEM simulation

The discrete and continuum behaviour of railway ballast

Laboratory Development and Testing of “smartrock” for Railroad Ballast Using Discrete Element Modeling

Analysing the Effect of Principal Stress Rotation on Railway Track Settlement by Discrete Element Method

Toward Large-Scale Simulation of Railroad Dynamics: Coupled Train–Track–Discrete Element Method Model