Abstract:Currently eutrophication has become a hot issue all over the world.The removal of phosphorus from wastewaters is regarded as an important approach to fight eutrophication since phosphorus is one of the main factors causing eutrophication.The chemical phosphorus removal technology with ferric salt as a precipitant is in widespread use to meet the wastewater discharge standard.The optimization of phosphorus removal technology helps to cut down the cost of wastewater treatment.Herein the response surface methodology(RSM)is introduced to investigate the individual and combined effects of operation parameters.The performance of chemical phosphorus removal technology with ferric salt as a precipitant is dependant on a series of factors.Fe/P ratio,pH and flash mixing speed(FMS)were chosen as objects of study,and single-factor experiment and multiple-factor experiment were carried out to optimize the phosphorus removal efficiency.The results of single-factor experiment showed that both Fe/P ratio and pH had significant effects on phosphorus removal,but FMS did not.When the phosphorus concentration was 100mg/L,the optimal operation parameters were Fe/P ratio 3.0,pH 8.0,FMS 175-225r/min.The results of multiple-factor experiment showed that the individual effects of operation parameters on phosphorus removal were in order as Fe/PpH FMS.The combined effects of operation parameters were in order as Fe/P-FMS pH-FMS Fe/P-pH,among which the effects of Fe/P-FMS and Fe/P-pH were positive and the effect of pH-FMS was negative.Based on the experiment,priority/combinationmodel was proposed to enhance the phosphorus removal with ferric salt as a precipitant.The optimal operation parameters were as follows:Fe/P=2.57,pH=6.31and FMS=136r/min,when the phosphorus concentration was 100mg/L.Both synthetic and real wastewaters were used to verify the feasibility ofpriority/combinationmodel.Operated according to the model,the phosphorus removal was larger than 97%and the fractional error was less than 3%.It can be concluded that the response surface methodology is feasible for the optimization of operation parameters in wastewater treatment processes.Thepriority/combinationmodel is effective for the improvement of phosphorus removal from wastewaters with ferric salt as a precipitant.During the wastewater treatment,the synergic action of operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.

Optimization and reaction kinetics analysis for phosphorus removal in struvite precipitation process

Phosphorus removal and recovery from wastewater by highly efficient struvite crystallization in an improved fluidized bed reactor

Phosphate enhance recovery from wastewater by mechanism analysis and optimization of struvite settleability in fluidized bed reactor

Phosphorus Recovery from Wastewater Aiming Fertilizer Production: Struvite Precipitation Optimization Using a Sequential Plackett–Burman and Doehlert Design

Removal and recovery of phosphate anion as struvite from wastewater

Performance of calcium phosphates crystallization process for phosphorus removal

Optimization of Phosphorus Recovery using Electrochemical Struvite Precipitation and Comparison with Iron Electrocoagulation System

Multivariate optimization of phosphate removal and recovery from aqueous solution by struvite crystallization in a fluidized-bed reactor

Effects of Physicochemical Parameters on Struvite Crystallization Based on Kinetics

Effect of operating conditions on phosphorus recovery from acidified plant oil wastewater by struvite crystallization

OPTIMIZATION OF KEY PARAMETERS IN STRUVITE (K) PRODUCTION FOR PHOSPHORUS AND POTASSIUM RECOVERY USING A BATCH CRYSTALLIZER

Phosphate recovery from swine wastewater by struvite precipitation and process optimization using response surface methodology

Effect of acetic acid on struvite precipitation: An exploration of product purity, morphology and reaction kinetics using central composite design

Effective removal of phosphorous from dairy wastewater by struvite precipitation: process optimization using response surface methodology and chemical equilibrium modeling

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

Phosphorus Recovery Through Struvite Crystallisation: Recent Developments in the Understanding of Operational Factors.

Effects of pH, molar ratios and pre-treatment on phosphorus recovery through struvite crystallization from effluent of anaerobically digested swine wastewater

Optimization of struvite precipitation in synthetic biologically treated swine wastewater--determination of the optimal process parameters

Phosphorus recovery through struvite precipitation from wastewater: effect of the competitive ions

New process for phosphorus removal with the combination of biological medium addition and calcium hydroxyphosphate crystallization

The Recovery of Phosphorus from Acidic Ultra-High Phosphorous Wastewater by the Struvite Crystallization