Abstract:Currently eutrophication has become a hot issue all over the world.The removal of phosphorus from wastewaters is regarded as an important approach to fight eutrophication since phosphorus is one of the main factors causing eutrophication.The chemical phosphorus removal technology with ferric salt as a precipitant is in widespread use to meet the wastewater discharge standard.The optimization of phosphorus removal technology helps to cut down the cost of wastewater treatment.Herein the response surface methodology(RSM)is introduced to investigate the individual and combined effects of operation parameters.The performance of chemical phosphorus removal technology with ferric salt as a precipitant is dependant on a series of factors.Fe/P ratio,pH and flash mixing speed(FMS)were chosen as objects of study,and single-factor experiment and multiple-factor experiment were carried out to optimize the phosphorus removal efficiency.The results of single-factor experiment showed that both Fe/P ratio and pH had significant effects on phosphorus removal,but FMS did not.When the phosphorus concentration was 100mg/L,the optimal operation parameters were Fe/P ratio 3.0,pH 8.0,FMS 175-225r/min.The results of multiple-factor experiment showed that the individual effects of operation parameters on phosphorus removal were in order as Fe/PpH FMS.The combined effects of operation parameters were in order as Fe/P-FMS pH-FMS Fe/P-pH,among which the effects of Fe/P-FMS and Fe/P-pH were positive and the effect of pH-FMS was negative.Based on the experiment,priority/combinationmodel was proposed to enhance the phosphorus removal with ferric salt as a precipitant.The optimal operation parameters were as follows:Fe/P=2.57,pH=6.31and FMS=136r/min,when the phosphorus concentration was 100mg/L.Both synthetic and real wastewaters were used to verify the feasibility ofpriority/combinationmodel.Operated according to the model,the phosphorus removal was larger than 97%and the fractional error was less than 3%.It can be concluded that the response surface methodology is feasible for the optimization of operation parameters in wastewater treatment processes.Thepriority/combinationmodel is effective for the improvement of phosphorus removal from wastewaters with ferric salt as a precipitant.During the wastewater treatment,the synergic action of operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.

Effective removal of phosphorous from dairy wastewater by struvite precipitation: process optimization using response surface methodology and chemical equilibrium modeling

Phosphate recovery from swine wastewater by struvite precipitation and process optimization using response surface methodology

Phosphorus removal and recovery from wastewater by highly efficient struvite crystallization in an improved fluidized bed reactor

Optimization of phosphate recovery as struvite from synthetic distillery wastewater using a chemical equilibrium model

Phosphorus Recovery from Wastewater Aiming Fertilizer Production: Struvite Precipitation Optimization Using a Sequential Plackett–Burman and Doehlert Design

Struvite Production from Dairy Processing Waste

Effects of pH, molar ratios and pre-treatment on phosphorus recovery through struvite crystallization from effluent of anaerobically digested swine wastewater

Removal and recovery of phosphate anion as struvite from wastewater

Optimization of Phosphorus Recovery using Electrochemical Struvite Precipitation and Comparison with Iron Electrocoagulation System

Optimization of struvite precipitation in synthetic biologically treated swine wastewater--determination of the optimal process parameters

Nutrients Recovery from Dairy Wastewater by Struvite Precipitation Combined with Ammonium Sorption on Clinoptilolite

Struvite purity prediction by response surface methodology and chemical equilibrium modeling combination

A holistic and sustainable approach for recovery of phosphorus via struvite crystallization from synthetic distillery wastewater

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

Phosphate enhance recovery from wastewater by mechanism analysis and optimization of struvite settleability in fluidized bed reactor

Phosphorus recovery from source-diverted blackwater through struvite precipitation

Effective recovery of struvite from wastewater by electrochemical process

Phosphorus recovery as struvite from hydrothermal carbonization liquor of chemically produced dairy sludge by extraction and precipitation

Multivariate optimization of phosphate removal and recovery from aqueous solution by struvite crystallization in a fluidized-bed reactor

Optimization and reaction kinetics analysis for phosphorus removal in struvite precipitation process

Optimization of struvite from sewage sludge ash as phosphorus source