Abstract:Purpose For additive manufacturing (AM) through laser-based powder bed fusion of polymers (PBF-LB/P), accurate characterization of powder flowability is vital for achieving high-quality parts. However, accurately characterizing feedstock flowability presents challenges because of a lack of consensus on which tests to perform and the diverse forces and mechanisms involved. This study aims to undertake a thorough investigation into the flowability of eight feedstock materials for PBF-LB/P at different temperatures using various techniques. Design/methodology/approach For ambient temperature assessments, established metrics such as avalanche angle and Hausner ratio, along with the approximated flow function coefficient (FFC app ), are used. The study then focuses on the influence of elevated temperatures representative of in-process conditions. FFC app and differential scanning calorimetry (DSC) are performed and analyzed, followed by a correlation analysis as a holistic approach to identify key aspects for flowability. Furthermore, two feedstock materials are compared with a previous study to connect the present findings to PBF-LB/P processing. Findings The study revealed intrinsic material properties such as mechanical softening near the melting point to become significant. This partially explains why certain powders with poor ambient temperature flowability are consistently demonstrated to produce high-quality parts. FFC app and thermal characterization through DSC are identified as critical metrics for optimizing feedstock material characteristics across temperature ranges. Originality/value Previous studies emphasized specific characterizations of feedstock material at ambient temperature, presented a limited materials selection or focused on metrics such as shape factors. In contrast, this study addresses a partially understood aspect by examining the critical role of temperature in governing feedstock material flowability. It advocates for the inclusion of temperature variables in flowability analyses to closely resemble the PBF-LB/P process, which can be applied to material design, selection and process optimization.

A quantitative approach to assess high temperature flow properties of a PA 12 powder for laser sintering

Correlation analysis of feedstock flowability and temperature for laser-based powder bed fusion of polymers

Powder flowability characterisation at preheating temperature in additive manufacturing

Polymer viscosity, particle coalescence and mechanical performance in high-temperature laser sintering

Effects of laser sintering processing time and temperature on changes in polyamide 12 powder particle size, shape and distribution

Towards the Reuse of Fire Retarded Polyamide 12 for Laser Sintering

Experimental investigating and numerical simulations of the thermal behavior and process optimization for selective laser sintering of PA6

On thermal properties of metallic powder in laser powder bed fusion additive manufacturing

High-Temperature Mechanical Properties of Stress-Relieved AlSi10Mg Produced via Laser Powder Bed Fusion Additive Manufacturing

The Effect of Powder Re-Use on the Coalescence Behaviour and Isothermal Crystallisation Kinetics of Polyamide 12 within Powder Bed Fusion

Quality over Quantity: How Different Dispersion Qualities of Minute Amounts of Nano-Additives Affect Material Properties in Powder Bed Fusion of Polyamide 12

Predictive Modeling of Mechanical Properties from Degraded Polyamide 12 Powder in Laser Powder Bed Fusion

Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy

Investigating the effect of temperature on powder spreading behaviour in powder bed fusion additive manufacturing process by Discrete Element Method

An investigation into the mechanisms that influence laser sintered polyamide-12 top surfaces

Optimization of Mechanical Properties and Evaluation of Fatigue Behavior of Selective Laser Sintered Polyamide-12 Components

Investigation into effects of cooling rate on properties of polyamide 12 parts in the multi jet fusion process

Evaluation of Polyethylene Terephthalate Powder in High Speed Sintering

Re-use of polyamide-12 in powder bed fusion and its effect on process-relevant powder characteristics and final part properties

Effects of powders and process parameters on density and hardness of A357 aluminum alloy fabricated by selective laser melting

Crystallization kinetics of polyetheretherketone during high temperature-selective laser sintering