Abstract:Tellurium and its alloys are used in many applications such as photoconductors, piezoelectric devices, thermoelectric generators and coolers [1]. For thermoelectric applications, the transport properties (thermal conductivity, electrical resistivity, Seebeck coefficient) of tellurium and its compounds can be improved by nanostructuring [2]. One-dimensional nanostructures like nanowires [3] and core-shell nanowires [4] are particularly promising due to the high phonon interface scattering and the blocking of the phonon conduction along the wire axis which lead to an increase of the thermoelectric conversion efficiency. Te nanowires can represent a base to create core-shell structures, being the core that could be further capped with a shell to get arrays of Te-based thermoelectric nanostructures like BiTe [5], AgTe [6] or LaTe [7]. Template assisted electrodeposition is a low cost technique widely used in literature for the synthesis of nanowires but implies several preparation steps and the removal of the template after the growth of the nanowires. The aim of this work is to develop a template free synthesis route that would be more convenient. For this purpose, Room-Temperature Ionic Liquids (RTILs) appear as promising solvents. Indeed, it has been highlighted that they can act as stabilizing agents for nanoparticles and nanostructured films synthesis [8]. In a previous work ([9]), our laboratory showed that Te nanowires can be obtained in an ionic liquid binary mixture: 1-ethyl-1-octyl-piperidinium bis(trifluoromethylsulfonyl)imide:1-ethyl-1-octyl-piperidinium bromide (EOPipTFSI:EOPipBr). In the present work, several morphologies were obtained by varying the synthesis parameters (applied fixed potential, Te(IV) concentration, electrolyte composition). Under charge transfer control, micrometer faceted grains are formed. Under diffusion control, the deposits are composed of nanowires, which are single crystalline as proven by SAED (Selected Area Electronic Diffraction) and TEM (Transmission Electron Microscopy) analyses. In highest tested overpotential conditions, nanowires turn progressively into crystallized hollow nanostructures (HNs) when the coulometric charge increases. This phenomenon is more accentuated at low concentration and disappears when using a soluble anode, showing that the formation of HNs is due to a limitation by species supply. The geometry of HNs, with a high surface to volume ratio, is particularly interesting to create high performances thermoelectric materials. Indeed, this geometry could further decrease the lattice part of the thermal diffusion coefficient by phonon confinement. By decreasing the bromide content of the electrolyte, hair-like single crystalline nanowires with a high aspect ratio can be obtained. HRTEM (High Resolution Transmission Electron Spectroscopy) analyses reveal a growth along the c -axis, with a smooth interface. No surface contaminants were observed by STEM (Scanning Transmission Electron Microscopy), proving that halogenide ions do not play the role of capping agents, unlike observed in other works [10]. References [1] Q. Wang et al, Adv. Mater. 2013 , 25 , 3915 [2] K.T. Kim et al, Adv. Powder Technol. 2011 , 22 , 566 [3] Caballero-Calero, O.; Martín-González, M., Scripta Materialia 2015, 10.1016/j.scriptamat.2015.04.020. [4] Poon, S. J.; Petersen, A. S.; Wu, D. Appl. Phys. Lett. 2013 , 102 . [5] Kang, J.; Roh, J. W.; Shim, W.; Ham, J.; Noh, J. S.; Lee, W. Advanced Materials 2011 , 23 , 3414. [6] Fang, H. Y.; Yang, H. R.; Wu, Y. Chemistry of Materials 2014 , 26 , 3322. [7] May, A. F.; Fleurial, J. P.; Snyder, G. J. Phys. Rev. B 2008 , 78 . [8] Z. Li et al, Current Opinion in Solid State and Materials Science 2008 , 12 , 1 [9] J. Szymczak et al., Electrochem. Comm. 2012 , 24 , 57 [10] Al-Salman, R.; Sommer, H.; Brezesinski, T.; Janek, J. Chemistry of Materials 2015 , 27 , 3830. Figure 1: SEM (a) and HRTEM (b) images of Te nanostructures electrodeposited in EOPipTFSI ionic liquid Figure 1

Tuning the Morphology of Te 1D Nanostructures By Template-Free Electrochemical Deposition in an Ionic Liquid

1D Tellurium Nanostructures: Photothermally Assisted Morphology-Controlled Synthesis and Applications in Preparing Functional Nanoscale Materials

Templating Synthesis Of Uniform Bi2te3 Nanowires With High Aspect Ratio In Triethylene Glycol (Teg) And Their Thermoelectric Performance

Template-Free Electrodeposition of One-Dimensional Nanostructures of Tellurium

An Efficient Templating Approach for Synthesis of Highly Uniform CdTe and PbTe Nanowires.

Electrochemical Fabrication of Bi<sub>x</sub>Te<sub>1-x</sub> (0.4 ≤ x ≤ 0.7) Nanowire Arrays

Electrochemical Fabrication of Bi<sub>x</sub>Te<sub>1-x</sub> (0.4 ≤ X ≤ 0.7) Nanowire Arrays

Controllable Synthesis Of Bi2te3 Intermetallic Compounds With Hierarchical Nanostructures Via Electrochemical Deposition Route

Controlled Synthesis of Tellurium Nanostructures from Nanotubes to Nanorods and Nanowires and Their Template Applications

In-Situ Fabrication of Bi2te3-Te Sheet-Rods Using Te Nanowires As Template

Controlled Solvothermal Synthesis of Single-Crystal Tellurium Nanowires, Nanotubes and Trifold Structures and Their Photoelectrical Properties

Electrochemical Fabrication of Large-Area, Ordered Bi2Te3 Nanowire Arrays

Catalyst- and template-free direct electrodeposition of germanium and germanium–tin alloy nanowires from an ionic liquid

Electrochemical fabrication of Bixte1-X(0.4 ≤ X ≤ 0.7) nanowire arrays

Controlled Hydrothermal Synthesis of Tri-Wing Tellurium Nanoribbons and Their Template Reaction

Growth of Tellurium Nanowire Bundles from an Ionic Liquid Precursor

Epitaxial Growth of Shape-Controlled Bi2te3-Te Heterogeneous Nanostructures

Toward a Procedure for the Template Free Growth of Te Nanowires Across an Insulator by Electrodeposition

Template-assisted electrodeposition of freestanding antimony, tin, and antimony-tin nanowire arrays from an ionic liquid

Bi2te3 Nanowire Array Preparation and Surface Polishing by Electrochemical Deposition

Modification of the Electrolyte/Electrode Interface for the Template-free Electrochemical Synthesis of Metal Nanowires from Ionic Liquids