Abstract:Tellurium and its alloys are used in many applications such as photoconductors, piezoelectric devices, thermoelectric generators and coolers [1]. For thermoelectric applications, the transport properties (thermal conductivity, electrical resistivity, Seebeck coefficient) of tellurium and its compounds can be improved by nanostructuring [2]. One-dimensional nanostructures like nanowires [3] and core-shell nanowires [4] are particularly promising due to the high phonon interface scattering and the blocking of the phonon conduction along the wire axis which lead to an increase of the thermoelectric conversion efficiency. Te nanowires can represent a base to create core-shell structures, being the core that could be further capped with a shell to get arrays of Te-based thermoelectric nanostructures like BiTe [5], AgTe [6] or LaTe [7]. Template assisted electrodeposition is a low cost technique widely used in literature for the synthesis of nanowires but implies several preparation steps and the removal of the template after the growth of the nanowires. The aim of this work is to develop a template free synthesis route that would be more convenient. For this purpose, Room-Temperature Ionic Liquids (RTILs) appear as promising solvents. Indeed, it has been highlighted that they can act as stabilizing agents for nanoparticles and nanostructured films synthesis [8]. In a previous work ([9]), our laboratory showed that Te nanowires can be obtained in an ionic liquid binary mixture: 1-ethyl-1-octyl-piperidinium bis(trifluoromethylsulfonyl)imide:1-ethyl-1-octyl-piperidinium bromide (EOPipTFSI:EOPipBr). In the present work, several morphologies were obtained by varying the synthesis parameters (applied fixed potential, Te(IV) concentration, electrolyte composition). Under charge transfer control, micrometer faceted grains are formed. Under diffusion control, the deposits are composed of nanowires, which are single crystalline as proven by SAED (Selected Area Electronic Diffraction) and TEM (Transmission Electron Microscopy) analyses. In highest tested overpotential conditions, nanowires turn progressively into crystallized hollow nanostructures (HNs) when the coulometric charge increases. This phenomenon is more accentuated at low concentration and disappears when using a soluble anode, showing that the formation of HNs is due to a limitation by species supply. The geometry of HNs, with a high surface to volume ratio, is particularly interesting to create high performances thermoelectric materials. Indeed, this geometry could further decrease the lattice part of the thermal diffusion coefficient by phonon confinement. By decreasing the bromide content of the electrolyte, hair-like single crystalline nanowires with a high aspect ratio can be obtained. HRTEM (High Resolution Transmission Electron Spectroscopy) analyses reveal a growth along the c -axis, with a smooth interface. No surface contaminants were observed by STEM (Scanning Transmission Electron Microscopy), proving that halogenide ions do not play the role of capping agents, unlike observed in other works [10]. References [1] Q. Wang et al, Adv. Mater. 2013 , 25 , 3915 [2] K.T. Kim et al, Adv. Powder Technol. 2011 , 22 , 566 [3] Caballero-Calero, O.; Martín-González, M., Scripta Materialia 2015, 10.1016/j.scriptamat.2015.04.020. [4] Poon, S. J.; Petersen, A. S.; Wu, D. Appl. Phys. Lett. 2013 , 102 . [5] Kang, J.; Roh, J. W.; Shim, W.; Ham, J.; Noh, J. S.; Lee, W. Advanced Materials 2011 , 23 , 3414. [6] Fang, H. Y.; Yang, H. R.; Wu, Y. Chemistry of Materials 2014 , 26 , 3322. [7] May, A. F.; Fleurial, J. P.; Snyder, G. J. Phys. Rev. B 2008 , 78 . [8] Z. Li et al, Current Opinion in Solid State and Materials Science 2008 , 12 , 1 [9] J. Szymczak et al., Electrochem. Comm. 2012 , 24 , 57 [10] Al-Salman, R.; Sommer, H.; Brezesinski, T.; Janek, J. Chemistry of Materials 2015 , 27 , 3830. Figure 1: SEM (a) and HRTEM (b) images of Te nanostructures electrodeposited in EOPipTFSI ionic liquid Figure 1

Template-assisted electrodeposition of freestanding antimony, tin, and antimony-tin nanowire arrays from an ionic liquid

Silver Nanowires Eelectrodeposited from Reverse Hexagonal Liquid Crystals

Nanowire Arrays Electrodeposited from Liquid Crystalline Phases

Synthesis of Sulfide Nanowire Arrays through Template-Assisted Electrodeposition

Direct Electrodeposition of Ionic Liquid-Based Template-Free SnCo Alloy Nanowires As an Anode for Li-ion Batteries

Modification of the Electrolyte/Electrode Interface for the Template-free Electrochemical Synthesis of Metal Nanowires from Ionic Liquids

Direct Growth of Ni2Si Nanowire Array Electrodes for High-performance Reversible Lithium-ion Batteries

Building a Ni3S2 Nanotube Array and Investigating Its Application As an Electrode for Lithium Ion Batteries.

Catalyst- and template-free direct electrodeposition of germanium and germanium–tin alloy nanowires from an ionic liquid

Template synthesis of single-crystal Cu nanowire arrays by electrodeposition

Template-free Electrodeposition of AlFe Alloy Nanowires from a Room-Temperature Ionic Liquid As an Anode Material for Li-ion Batteries

Template Synthesis Of Sno2/Alpha-Fe2o3 Nanotube Array For 3d Lithium Ion Battery Anode With Large Areal Capacity

Large-scale and highly ordered 1D nanostructural arrays by template-assisted electrodeposition

Tuning the Morphology of Te 1D Nanostructures By Template-Free Electrochemical Deposition in an Ionic Liquid

Electrochemical Synthesis of Gallium Nanowires and Macroporous Structures in an Ionic Liquid.

Single-crystalline Silver Nanowire Arrays Directly Synthesized Onto Substrates by Template-Assisted Chemical Wetting

Electrochemically and template-synthesized nickel nanorod arrays and nanotubes

Antimony Nanowire Arrays Fabricated by Pulsed Electrodeposition in Anodic Alumina Membranes

Preparation of Free-Standing Nanowire Arrays on Conductive Substrates

Copper-Silicon Core-Shell Nanotube Arrays For Free-Standing Lithium Ion Battery Anodes

Preparation and Electrochemical Performance of 3D Structured LiFePO4 Nanowire Arrays