Abstract:Antimony telluride (Sb2Te3) and its based alloys are of importance to p-type semiconductors for thermoelectric applications near room temperature. Herein, we report a simple, low-energy intensive, and scalable surfactant-assisted reflux method for the synthesis of Sb2Te3 nanoparticles in the solvent ethylene glycol (EG) at low temperatures (120-180 degrees C). The formation mechanism of platelike Sb2Te3 nanoparticles is proposed. Also, it is found that the size, shape, and chemical composition of the products could be controlled by the introduction of organic surfactants (CTAB, PVP, etc.) or inorganic salts (EDTA-Na-2, NaOH, etc.). Additionally, the collected Sb2Te3 nanoparticles were further fabricated into nanostructured pellets using cold-compaction and annealing techniques. Low resistivity [(7.37-19.4) X 10(-6) Omega m], moderate Seebeck coefficient (103-141 mu V K-1), and high power factor (10-16 x 10(-4) W m(-1) K-2) have been achieved in our Sb2Te3-nanostructured bulk materials. The relatively low thermal conductivity (1.32-1.55 W m(-1) K-1) is attained in the nanobulk made of PVP-modified nanoparticles, and values of ZT in the range of 0.24-0.37 are realized at temperatures ranging from 50 to 200 degrees C. Our researches set forth a new avenue in promoting practical applications of Sb2Te3-based thermoelectric power generation or cooling devices.

Aqueous Chemical Reduction Synthesis of Bi2te3 Nanowires with Surfactant Assistance

A Facile Surfactant-assisted Reflux Method for the Synthesis of Single-Crystalline Sb2Te3 Nanostructures with Enhanced Thermoelectric Performance.

Solvothermal Synthesis and Characterization of Bi2Te3 Nanocrystals

Solvothermal Synthesis and Characterizations of Bi2Te3 Nano-Particles and Nanowires

The reaction mechanism for the synthesis of Bi2Te3-based thermoelectric materials by aqueous chemical method

Long Bi2s3 Nanowires Prepared by A Simple Hydrothermal Method

Thermoelectric Bi2Te3 nanotubes synthesized by low-temperature aqueous chemical method

Sonochemical Synthesis of Nanocrystalline Bi2Te3 Thermoelectric Compounds

Nanostructured Bi2Te3 Synthesized by Low Temperature Aqueous Chemical Route

Preparation of single crystalline Bi2Te3 nanorods through chemical reduction at low temperature

Bi2te3 Nanowire Array Preparation and Surface Polishing by Electrochemical Deposition

Large-Scale Synthesis of Crystalline Tellurium Nanowires with Controlled-Diameters Via A Hydrothermal-Reduction Process

Nanostructured Bi<sub>2</sub>Te<sub>3</sub> synthesized by low temperature aqueous chemical route

Preparation of Bi2te3 Nano-Powders Via an Aqueous Chemical Method

Effects of Various Reductants and Surfactants on the Nanostructure of Bi<sub>2</sub>Te<sub>3</sub> Synthesized by a Hydrothermal Process

Wet-chemical synthesis and consolidation of stoichiometric bismuth telluride nanoparticles for improving the thermoelectric figure-of-merit

Control to Synthesize Bi2s3 Nanowires by A Simple Inorganic-Surfactant-Assisted Solvothermal Process

Electrochemical Fabrication of Bi<sub>x</sub>Te<sub>1-x</sub> (0.4 ≤ x ≤ 0.7) Nanowire Arrays

Effects of Various Reductants and Surfactants on the Nanostructure of Bi 2 Te 3 Synthesized by a Hydrothermal Process

Templating Synthesis Of Uniform Bi2te3 Nanowires With High Aspect Ratio In Triethylene Glycol (Teg) And Their Thermoelectric Performance

High yield Bi2Te3 single crystal nanosheets with uniform morphology via a solvothermal synthesis