A Model of Damage Evolution During Crevice Corrosion of Nickel Base Alloys

R. Scott Lillard,A Stenta,K. L. Kreider,G. Young,A, Stenta

DOI: https://doi.org/10.1149/ma2013-02/20/1784

2013-10-27

ECS Meeting Abstracts

Abstract:Abstract not Available.

What problem does this paper attempt to address?

A Phase-Field Model for Creep Behavior in Nickel-Base Single-Crystal Superalloy: Coupled with Creep Damage

Min Yang,Jun Zhang,Hua Wei,Weimin Gui,Haijun Su,Tao Jin,Lin Liu

DOI: https://doi.org/10.1016/j.scriptamat.2017.12.008

IF: 6.302

2018-01-01

Scripta Materialia

Abstract:This paper focuses on the simulation of microstructural evolution during the three stages of creep in nickel-base single-crystal superalloys. A phase-field model coupled with a single-crystal plasticity model is developed in this paper. The creep damage and γ′-shearing during tertiary creep are considered in the phase-field model for the first time. The complete evolutions of γ′/γ phases during all three stages of creep are primarily simulated, and the simulated creep curve shows typical three creep deformation stages. The distribution of plastic strain is illustrated to analyze the morphological evolution and creep mechanism.
Evolution of Damage in Near α IMI-834 Titanium Alloy Under Monotonic Loading Condition: A Continuum Damage Mechanics Approach

Jalaj Kumar,S. Padma,B. Srivathsa,N. Vyaghreswara Rao,Vikas Kumar

DOI: https://doi.org/10.1115/1.3086384

2009-06-02

Journal of Engineering Materials and Technology

Abstract:In the present work, a continuum damage mechanics model, based on Lemaitre’s concept of equivalent stress hypothesis (1986, “Local Approach to Fracture,” Eng. Fract. Mech., 25, pp. 523–537), has been applied to study the evolution of damage under monotonic loading condition in a near α IMI-834 titanium alloy, used for aeroengine components in compressor module. The damage model parameters have been experimentally identified by in situ measurement of damage during monotonic deformation using alternating current potential drop technique. The damage model has been applied to predict damage evolution in an axisymmetrically notched specimen using finite element analysis. A reasonably good agreement has been observed between numerically simulated and experimentally measured damage behaviors. Damage micromechanisms operative in this alloy have also been identified which show multiple damage events.

materials science, multidisciplinary,engineering, mechanical
Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing

Changhao Pei,Huang Yuan,Bo Li,Songyun Ma

DOI: https://doi.org/10.1016/j.engfracmech.2022.108450

IF: 5.4

2022-06-01

Engineering Fracture Mechanics

Abstract:The objective of the present work is to characterize the effects of microstructural features, including porosity, precipitates, and to quantify their contributions to the damage evolution in the Inconel 718 alloy built by selective laser melting (SLM). 3D morphology of porous defects in the SLM alloy obtained from X-ray micro-computed tomography before and after hot isostatic pressing (HIP) were analyzed and classified based on the pore size, shape, and distribution. The unmelt region pores with the large size and irregular shape are found serving as crack sources and responsible for the anisotropic damage evolution. The inter-dendritic precipitated phases and twin boundaries were observed and preferred to be crack initiation sites and propagation paths, which further promote microstructural damage evolution. The macroscopic anisotropic damage of Inconel 718 alloy was evaluated through the variations of the material stiffness measurement from tensile tests with multiple unloading steps. A microstructure-dependent damage model was introduced to quantitatively describe the contributions of the microstructures o the evolution of macroscopic material degradation. The total damage was decomposed into three components based on the microstructural mechanisms and gives meaningful evolution laws of the microstructural characteristics. The material stiffness degradation processes of SLM can be predicted by the present model with good agreement.

mechanics
A Damage Evolution Model Based on Micro-Structural Characteristics for an Additive Manufactured Superalloy under Monotonic and Cyclic Loading Conditions

Changhao Pei,Wu Zeng,Huang Yuan

DOI: https://doi.org/10.1016/j.ijfatigue.2019.105279

IF: 5.489

2019-01-01

International Journal of Fatigue

Abstract:In the present work the superalloy Inconel 718 manufactured by selective laser melting (SLM) was investigated with focus on micro-structural damage evolution under both monotonic and cyclic loading conditions. Material testing and characterization reveal significantly accelerated damage evolution of the SLM material, in comparing with the forged Inconel 718. An accumulated plastic strain based damage model was proposed to predict the damage evolution in the alloys under both monotonic and cyclic loading. The damage mechanism related to detrimental precipitate particles and porous defects in the material was discussed and considered in the model, which can predict both monotonic and cyclic material degradation processes with agreement.
Multiscale modelling of damage occurrence of eutectic phase in Al–Ni–Mn alloy

P. Sankanit,P. Pandee,V. Uthaisangsuk

DOI: https://doi.org/10.1016/j.euromechsol.2024.105275

IF: 4.873

2024-02-01

European Journal of Mechanics - A/Solids

Abstract:Aluminum-nickel binary alloys exhibit good thermal stability. However, by adding Mn microstructures of the alloy are largely changed and resulting mechanical properties could be significantly affected. A microstructure based approach coupled with damage criteria was proposed for investigating local stress, strain developments and damage mechanisms on the micro-scale of Al–4Ni–1Mn with Sc and Zr alloy. For the model, flow curves of each constituent phase were determined using both experiments and dislocation theory. Tensile test results of the alloy showed that damage mostly initiated within α-Al matrix and afterwards propagated to eutectic phase region. Therefore, the Hosford-Coulomb ductile damage model was employed for describing failure evolution of the Al matrix. The representative volume element (RVE) model fairly demonstrated microstructure deformation of a mini-tensile sample. Then, effects of different phase morphologies on local damage onset of the examined alloy were analyzed. It was found that eutectic particles with aspect ratio higher than 7 and oriented in parallel to loading direction were the most critical sites of cracking. This result was in accordance with experimental fracture analyses.

mechanics
Ductile damage evolution under triaxial state of stress: theory and experiments

Nicola Bonora,Domenico Gentile,A. Pirondi,Golam Newaz

DOI: https://doi.org/10.1016/j.ijplas.2004.06.003

IF: 8.5

2005-05-01

International Journal of Plasticity

Abstract:In this paper, the continuum damage mechanics (CDM) model formulation proposed by [Eng. Fract. Mech. 58(1/2) (1997) 11] has been validated against ductile damage evolution experimentally measured in A533B low alloy steel under various stress triaxiality conditions. A procedure to identify the model parameters has been defined first. Then, the model has been used to simulate, via finite element analysis (FEA), tests on notched flat rectangular bars with different notch radii. The experiments and the FEA predictions are finally compared with each other. The results presented here confirm the transferability of damage parameters definition and the potential of the proposed damage model in predicting ductile failure occurrence in structures and components under multi-axial state of stress loading conditions.

materials science, multidisciplinary,engineering, mechanical,mechanics
Numerical Simulation of Damage Evolution and Electrode Deformation of X100 Pipeline Steel during Crevice Corrosion

Wenxian Su,Zhikuo Liu

DOI: https://doi.org/10.3390/ma15062329

IF: 3.4

2022-03-21

Materials

Abstract:In this paper, the spatial and temporal damage evolution was described during crevice corrosion through developing a two−dimensional (2−D) model. COMSOL code was used to simulate the crevice corrosion regulated by the I∙R voltage of nickel (Ni) metal in sulfuric acidic. The electrode deformation, potential and current curves, and other typical characteristics were predicted during crevice corrosion, where results were consistent with published experimental results. Then, based on the Ni model, the damage evolution of X100 crevice corrosion in CO2 solution was simulated, assuming uniform distribution of solution inside and outside the crevice. The results showed that over time, the surface damage of Ni electrode increased under a constant applied potential. As the gap increased, the critical point of corrosion (CPC) inside the crevice moved into a deeper location, and the corrosion damage area (CDA) gradually expanded, but the threshold value of corrosion damage remained almost unchanged. The CDA inside the crevice extended toward the opening and the tip of crevice. Since the potential drop in this region increases with increasing current, the passivation potential point moved towards the opening. As the gap increased and the electrolyte resistance decreased, the critical potential for reaching the maximum corrosion rate moved into a deeper location. It is significant for predicting the initial damage location and the occurrence time of surface damage of crevice corrosion through the 2−D model that is not available through the one-dimensional simplified model.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
A damage model for ductile metals

D.J. Bammann,E.C. Aifantis

DOI: https://doi.org/10.1016/0029-5493(89)90095-2

IF: 1.7

1989-09-01

Nuclear Engineering and Design

Abstract:A physically-based theory of damage for ductile metals is outlined. It rests upon a direct extension of the authors recently proposed viscoplastic model for finite deformations to include the effects of dislocation—void interactions as they manifest themselves in void nucleation, growth, and coalescence. Emphasis is put on illustrating the general structure of the present framework within which coupling effects of texture development, void formation, and adiabatic heating can be considered and their role to the localization of deformation and failure can be evaluated. No special attention is placed on justifying the various growth laws and simplifying assumptions pertaining to the detailed structure of the model, for example the manner that spatial gradients of the damage variable enter into the theory. Such simplifications, however, facilitate the solution of the relevant equations for a case of homogeneous triaxial state of stress permitting a qualitative comparison with experimental data obtained for Bridgeman-notch specimens.

nuclear science & technology
Damage Evolution Due to Extremely Low-Cycle Fatigue for Inconel 718 Alloy

Mohammed Algarni,Yuanli Bai,Mohammed Zwawi,Sami Ghazali

DOI: https://doi.org/10.3390/met9101109

IF: 2.695

2019-10-17

Metals

Abstract:This paper evaluates the damage evolution process under extremely low-cycle fatigue (ELCF). The study explores the damage behavior under different stress states. The influence of the multiaxial state of stress on the metal’s life is determined. Two different stress states were examined: (a) axisymmetric and (b) plane-strain. The study is based on the modified Mohr–Coulomb (MMC) ductile fracture criterion that was extended to cover the ELCF regime in a previous research study. Four distinctive geometries are designed to study the effect of different stress states on ELCF life and damage evolution. The damage model is calibrated for life prediction to agree with the ELCF experimental results. The investigation of the damage evolution behavior is dependent on equivalent plastic strain, stress triaxiality, Lode angle, and cyclic loading effect. The damage evolution is extracted from Abaqus finite element simulations and plotted versus the equivalent plastic strain. The damage accumulation shows nonlinear evolution behavior under cyclic loading conditions. SEM images were taken to further study the microscopic failure mechanisms of ELCF.

materials science, multidisciplinary,metallurgy & metallurgical engineering
A modified damage-coupled viscoplastic constitutive model for capturing the asymmetric behavior of a nickel-based superalloy under wide creep-fatigue loadings

Li Sun,Li-Qiang Liu,Run-Zi Wang,Xiao-Wei Wang,Jian-Ping Tan,Su-Juan Guo,Ji Wang,Ding-Wu Zhang,Xian-Cheng Zhang,Shan-Tung Tu

DOI: https://doi.org/10.1016/j.ijfatigue.2022.107160

IF: 5.489

2022-11-01

International Journal of Fatigue

Abstract:In this study, cyclic deformation behaviors of nickel-based GH4169 superalloy are investigated in both experimental and simulated aspects via cyclic loading waveforms (i.e., PP, CP, PC and CC) at 650°C. Cyclic softening, stress relaxation and damage evolutions are analyzed, in which asymmetric cyclic softening in both peak/valley directions are demonstrated. The analysis of internal stress evolutions indicates that back stress is dominant and isotropic stress is secondary in cyclic softening. Afterward, a modified damage-coupled viscoplastic constitutive model is established to describe the complex cyclic behaviors as well as the damage evolutions. A term related to the first invariant of stress is incorporated into isotropic hardening rule and a softening factor introduced into the Ohno-Wang kinematic hardening rule. Additionally, a damage variable related to Young’s modulus is coupled into the model, which is experimentally validated via life prediction for more abundant experimental data points. The modified model is expected to provide an in-depth insight into cyclic behaviors and fatigue life under wide loading waveforms for industrial applications.

materials science, multidisciplinary,engineering, mechanical
Reconstruction of Numerical Models for Mechanical Performance of Artificially Rusted Steel Subjected to High Temperatures

Zhen Guo,Jingjing Zhou,Xiangren Wang,Fumin Li,Fengjie Zhang

DOI: https://doi.org/10.1007/s11665-024-09456-w

IF: 2.3

2024-04-24

Journal of Materials Engineering and Performance

Abstract:In the study of the mechanical behavior of naturally corroded steel, observations of the initiation-development-fracture process of stress concentration in rust pits are still limited. In particular, it is difficult to study the influence of corrosion on the high-temperature mechanical behavior of steel. In this study, the high-temperature tensile failure process of naturally corroded steel was reproduced using ABAQUS finite element analysis software by accurately scanning the morphology of the corroded steel surface and using numerical reconstruction technology. By using CREO (PRO/E) image-processing software to format the digital data STP of complex morphology, it is possible to realize the numerical reconstruction of corrosion morphology and maintain sufficient analysis accuracy. When a reasonable model grid size and fracture constitutive model are selected, the real test results can be restored to analyze and discuss the stress evolution induced by corrosion.

materials science, multidisciplinary
Review of Damage Models for Environmentally Assisted Cracking on Metals

Jorge G. Diaz

DOI: https://doi.org/10.48550/arXiv.2111.05266

2021-11-06

Abstract:Stress corrosion cracking (SCC) is a form of failure in metals that is present mostly in systems where humidity contact and mechanical load play a key role. Therefore, prediction of the combined effect is desired. There are models based on path dissolution and film rupture, Hydrogen-embrittlement, based on empirical observations, and the unified approach which recognizes not the maximum applied stress intensity factor (SIF) but the SIF range as the fatigue driving force. So, in the later one, the contribution of corrosion to crack growth is recognized by adding a corrosion SIF.

Materials Science
Modeling ductile damage under fully reversed cycling

A. Pirondi,N. Bonora

DOI: https://doi.org/10.1016/s0927-0256(02)00411-1

IF: 3.572

2003-01-01

Computational Materials Science

Abstract:Damage mechanics has shown a great potential in predicting ductile material failure and, therefore, can be used to develop reliable tools for the design of components undergoing plastic deformation. In spite of the importance of cycling loading in components design, there are few examples of application of damage mechanics to fully reversed cycling. In this paper, the damage model proposed by Bonora [Eng. Fract. Mech. 58 (1997) 11] has been reformulated in order to account for compressive loading by introducing a new internal variable associated to damage. The model has been implemented into commercial finite element codes (MSC/MARC, ABAQUS). It was used to predict single element performance under cycling loading and damage accumulation in a round notched tensile bar. Some preliminary results are also discussed.

materials science, multidisciplinary
Modelling of dynamic behaviour of orthotropic metals including damage and failure

R. Vignjevic,N. Djordjevic,V. Panov

DOI: https://doi.org/10.1016/j.ijplas.2012.04.006

IF: 8.5

2012-11-01

International Journal of Plasticity

Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

materials science, multidisciplinary,engineering, mechanical,mechanics
A Multiscale Inelastic Internal State Variable Corrosion Model

M F Horstemeyer,W Song,H E Cho,D Wipf,H J Martin,D K Francis,S Chaudhuri

DOI: https://doi.org/10.3390/ma17163995

2024-08-11

Abstract:We present a corrosion internal state variable (ISV) damage model based upon the integrated computational materials engineering (ICME) hierarchical multiscale paradigm. Structure-property experiments for magnesium alloys were used where the only inputs were the volume fractions of each element of the periodic table. This macroscale ISV corrosion model finds its basis in Horstemeyer's mechanical damage model, which includes three separate ISVs for damage nucleation, growth, and coalescence, as well as Walton's inclusion of corrosion, which introduces five new ISVs for pit nucleation, growth, and coalescence, along with general corrosion and intergranular corrosion. While Walton's corrosion ISVs are phenomenological in nature, herein we develop a multiscale physical basis for the corrosion ISVs. The parameters for the macroscale corrosion ISVs were garnered from the mesoscale Butler-Volmer equations. Pure magnesium with differing amounts of aluminum were used in corrosion tests to exemplify the different pitting, general corrosion, and intergranular corrosion rates, and the macroscale ISV model was calibrated with said data, in which the only inputs to the model are the volume percentages of the elements magnesium and aluminum. Although magnesium alloys were used to motivate and calibrate the model, the model is abstract enough to possibly capture other material systems as well.
Numerical modeling of the evolution of ductile damage under proportional and non-proportional loading

R. Fincato,S. Tsutsumi

DOI: https://doi.org/10.1016/j.ijsolstr.2018.10.028

IF: 3.667

2019-03-01

International Journal of Solids and Structures

Abstract:Evaluating the correct mode of material failure is crucial in many manufacturing industries. Not only does doing so help prevent sudden malfunctions, it can also mean better-designed components and structures, which is economically advantageous. In recent years, the topic of ductile damage has been widely investigated, leading to the development of theoretical and numerical models that incorporate the effects of stress triaxiality and Lode angle, which are the main factors regulating damage evolution. Recent studies have expanded the borders of research in this area, revealing that non-proportionality of the loading paths affects the total deformation at fracture. In particular, the total deformation at failure seems to be higher when the load is proportional, suggesting that a different mechanism has to be taken into account whenever non-proportionality is triggered. The present paper aims to introduce a coupled elastoplastic–damage numerical model that can describe the evolution of ductile damage under proportional and non-proportional loading.

mechanics
Damage-coupled unified constitutive modeling of 316LN stainless steel including dynamic strain aging under various tension dwell time: A macroscopic phenomenological study

Gang Chen,Chengcheng Li,Mingwei Xie,Bingbing Li,Qiang Lin

DOI: https://doi.org/10.1016/j.ijplas.2023.103764

IF: 8.5

2023-09-25

International Journal of Plasticity

Abstract:A damage-coupled unified constitutive model is developed for 316LN stainless steel based on the framework of the Abdel-Karim and Ohno model. In the modified model, a kinematic hardening coefficient related to accumulated plastic strain is introduced in the linear hardening term, and a damage coefficient is incorporated in the static recovery term. Meanwhile, the parameters of isotropic hardening and kinematic hardening are associated with the maximum plastic strain rate and plastic strain memory to describe the effects of dynamic strain aging and plastic strain memory. Additionally, the kinematic hardening coefficients and static recovery coefficients correlate with dwell time to simulate stress relaxation throughout the whole-life time. The comparison between the simulation and experimental results indicates the validity of the modified model under the conditions of low-cycle fatigue and creep-fatigue interaction. After identifying the material parameters using a combination of classic parameter determination methods and optimization algorithms, the cyclic stress response and hysteresis loops can be accurately simulated throughout the whole-life time.

materials science, multidisciplinary,engineering, mechanical,mechanics
Experimental techniques for ductile damage characterisation

A. Sancho,M.J. Cox,T. Cartwright,G.D. Aldrich-Smith,P.A. Hooper,C.M. Davies,J.P. Dear

DOI: https://doi.org/10.1016/j.prostr.2016.06.124

2016-01-01

Procedia Structural Integrity

Abstract:Ductile damage in metallic materials is caused by the nucleation, growth and coalesce of voids and micro-cracks in the metal matrix when it is subjected to plastic strain. A considerable number of models have been proposed to represent ductile failure focusing on the ultimate failure conditions; however, only some of them study in detail the whole damage accumulation process. The aim of this work is to review experimental techniques developed by various authors to measure the accumulation of ductile damage under tensile loads. The measurement methods reviewed include: stiffness degradation, indentation, microstructure analysis, ultrasonic waves propagation, X-ray tomography and electrical potential drop. Stiffness degradation and indentation techniques have been tested on stainless steel 304L hourglass-shaped samples. A special interest is placed in the Continuum Damage Mechanics approach (CDM) as its equations incorporate macroscopic parameters that can represent directly the damage accumulation measured in the experiments. The other main objective lies in identifying the strengths and weaknesses of each technique for the assessment of materials subjected to different strain-rate and temperature conditions.

English Else
Damage Evolution Simulations via a Coupled Crystal Plasticity and Cohesive Zone Model for Additively Manufactured Austenitic SS 316L DED Components

Roya Darabi,Erfan Azinpour,Andre Ferreira,Jose Cesar de Sa,Ana Reis,Jan Dzugan

DOI: https://doi.org/10.3390/met12071096

IF: 2.695

2022-06-27

Metals

Abstract:This study presents a microstructural model applicable to additively manufactured (AM) austenitic SS 316L components fabricated via a direct energy deposition (DED) process. The model is primarily intended to give an understanding of the effect of microscale and mesoscale features, such as grains and melt pool sizes, on the mechanical properties of manufactured components. Based on experimental observations, initial assumptions for the numerical model regarding grain size and melt pool dimensions were considered. Experimental observations based on miniature-sized 316L stainless steel DED-fabricated samples were carried out to shed light on the deformation mechanism of FCC materials at the grain scale. Furthermore, the dependency of latent strain hardening parameters based on the Bassani–Wu hardening model for a single crystal scale is investigated, where the Voronoi tessellation method and probability theory are utilized for the definition of the grain distribution. A hierarchical polycrystalline modeling methodology based on a representative volume element (RVE) with the realistic impact of grain boundaries was adopted for fracture assessment of the AM parts. To qualify the validity of process–structure–property relationships, cohesive zone damage surfaces were used between melt pool boundaries as the predefined initial cracks and the performance of the model is validated based on the experimental observations.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Continuum damage mechanics modelling incorporating stress triaxiality effect on ductile damage initiation

Nicola Bonora,Gabriel Testa,Andrew Ruggiero,Gianluca Iannitti,Domenico Gentile

DOI: https://doi.org/10.1111/ffe.13220

2020-03-17

Abstract:<p>Micromechanical modelling of void nucleation in ductile metals indicates that strain required for damage initiation reduces exponentially with increasing stress triaxiality. This feature has been incorporated in a continuum damage mechanics (CDM) model, providing a phenomenological relationship for the damage threshold strain dependence on the stress triaxiality. The main consequences of this model modification are that the failure locus is predicted to change as function of stress triaxiality sensitivity of the material damage threshold strain and that high triaxial fracture strain is expected to be even lower than the threshold strain at which the damage processes initiate at triaxiality as low as 1/3. The proposed damage model formulation has been used to predict ductile fracture in unnotched and notched bars in tension for two commercially pure α‐iron grades (Swedish and ARMCO iron). Finally, the model has been validated, predicting spall fracture in a plate‐impact experiment and confirming the capability to capture the effect of the stress state on material fracture ductility at very high stress triaxiality.</p>

materials science, multidisciplinary,engineering, mechanical

A Model of Damage Evolution During Crevice Corrosion of Nickel Base Alloys

A Phase-Field Model for Creep Behavior in Nickel-Base Single-Crystal Superalloy: Coupled with Creep Damage

Evolution of Damage in Near α IMI-834 Titanium Alloy Under Monotonic Loading Condition: A Continuum Damage Mechanics Approach

Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing

A Damage Evolution Model Based on Micro-Structural Characteristics for an Additive Manufactured Superalloy under Monotonic and Cyclic Loading Conditions

Multiscale modelling of damage occurrence of eutectic phase in Al–Ni–Mn alloy

Ductile damage evolution under triaxial state of stress: theory and experiments

Numerical Simulation of Damage Evolution and Electrode Deformation of X100 Pipeline Steel during Crevice Corrosion

A damage model for ductile metals

Damage Evolution Due to Extremely Low-Cycle Fatigue for Inconel 718 Alloy

A modified damage-coupled viscoplastic constitutive model for capturing the asymmetric behavior of a nickel-based superalloy under wide creep-fatigue loadings

Reconstruction of Numerical Models for Mechanical Performance of Artificially Rusted Steel Subjected to High Temperatures

Review of Damage Models for Environmentally Assisted Cracking on Metals

Modeling ductile damage under fully reversed cycling

Modelling of dynamic behaviour of orthotropic metals including damage and failure

A Multiscale Inelastic Internal State Variable Corrosion Model

Numerical modeling of the evolution of ductile damage under proportional and non-proportional loading

Damage-coupled unified constitutive modeling of 316LN stainless steel including dynamic strain aging under various tension dwell time: A macroscopic phenomenological study

Experimental techniques for ductile damage characterisation

Damage Evolution Simulations via a Coupled Crystal Plasticity and Cohesive Zone Model for Additively Manufactured Austenitic SS 316L DED Components

Continuum damage mechanics modelling incorporating stress triaxiality effect on ductile damage initiation