Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

Evolution of Damage in Near α IMI-834 Titanium Alloy Under Monotonic Loading Condition: A Continuum Damage Mechanics Approach

Continuum damage mechanics modelling incorporating stress triaxiality effect on ductile damage initiation

A Damage Evolution Model Based on Micro-Structural Characteristics for an Additive Manufactured Superalloy under Monotonic and Cyclic Loading Conditions

Ductile damage evolution under triaxial state of stress: theory and experiments

A novel continuum damage evolution model based on the concept of damage driving force for unidirectional composites

Review of Damage Mechanics

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Damage Evolution Due to Extremely Low-Cycle Fatigue for Inconel 718 Alloy

Modelling of dynamic damage and failure in aluminium alloys

Numerical Analysis of Experiments on Damage and Fracture Behavior of Differently Preloaded Aluminum Alloy Specimens

A Thermodynamically Consistent Anisotropic Continuum Damage Mechanics Model With Damage-Dependent Equivalent Strain

Micro-damage evolution under intensive dynamic loading and its influence on constitutive and state equations for nanocrystalline NiTi alloy through molecular dynamics

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Damage evolution and modeling of sintered metals under multi-axial loading conditions

Numerical modeling of the evolution of ductile damage under proportional and non-proportional loading

A coupled ductile damage model for metal matrix composites: Development and application

A Novel Unified Visco-Plastic Damage Constitutive Model Considering Stress State of TC16 Titanium Alloy during Cold Deformation

Continuum Damage Mechanics for Sintered Powder Metals

A Continuous Low Cycle Fatigue Damage Model and Its Application in Engineering Materials

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming