Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

Modeling ductile damage under fully reversed cycling

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

A New Approach for Studying Fatigue Damage

Ductile damage evolution under triaxial state of stress: theory and experiments

Numerical modeling of the evolution of ductile damage under proportional and non-proportional loading

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Analysis of ductile damage and fracture under reverse loading

Identification and measurement of ductile damage parameters

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Continuum damage mechanics modelling incorporating stress triaxiality effect on ductile damage initiation

A coupled ductile damage model for metal matrix composites: Development and application

Ductile damage model for metal forming simulations including refined description of void nucleation

Damage Modeling of Oxide/oxide Ceramic Matrix Composites under Cyclic Loading Conditions

Modeling of the ductile damage – Application for bar shearing

On the experimental determination and prediction of damage evolution in composites via cyclic testing

Plastic-Damage Model for Cyclic Loading of Concrete Structures

An application of fully coupled ductile damage model considering induced anisotropies on springback prediction of advanced high strength steel materials

Experimental techniques for ductile damage characterisation