Abstract:The influence of grain refinement by high-pressure torsion (HPT) on the corrosion behavior of CoCrFeNi alloys with varied Cr content was investigated in aqueous 0.5 M H 2 SO 4 and 3.5% NaCl solutions. The results were compared with CoCrFeMnNi alloys. Both the alloys showed a single fcc phase after vacuum melting and HPT. Protective passivation capability and resistance to general corrosion in H 2 SO 4 was higher than that of Fe–Cr alloys and became higher with increasing Cr contents, indicating that high corrosion resistance of Cr-containing HEAs is attributed to the incorporation of Cr with other supporting elements. However, the impact of the nanocrystalline structure by HPT on the general corrosion behavior in the H 2 SO 4 solution was negligibly small while the resistance to the local attack as pitting in NaCl was improved for the CoCrFeNi alloy. This is contrasted with the CoCrFeMnNi alloy, which exhibited negligibly small change by HPT in both NaCl and H 2 SO 4 solutions. X-ray photoelectron spectroscopy indicated the Cr enrichment in passive films, but its degree is smaller regardless of grain size and Mn content, as compared with that of Fe–Cr alloys reported in the literature. The small change in the Cr enrichment in the passive film and the resulting corrosion behavior by grain refinement through HPT could be attributed to an intrinsic nature of HEAs such as sluggish diffusion and intrinsic lattice distortion. The improved resistance to pitting corrosion in CoCrFeNi alloys could be explained by the homogenization effect of the ultrahigh strain deformation, which may not take effect in alloys containing the solute Mn.

Effective hydrogen diffusion coefficient for CoCrFeMnNi high-entropy alloy and microstructural behaviors after hydrogen permeation

Modifying Element Diffusion Pathway by Transition Layer Structure in High-Entropy Alloy Particle Reinforced Cu Matrix Composites

Hydrogen Embrittlement of CoCrFeMnNi High-Entropy Alloy Compared with 304 and IN718 Alloys

Hydrogen diffusion and local Volta potential in high- and medium-entropy alloys

Hydrogen Isotope Permeation Behavior of AlCrFeTiNb, AlCrMoNbZr and AlCrFeMoTi High-Entropy Alloys Coatings

A comparative study of deuterium permeation behaviors of CoCrMnFeNi and AlCoCrFeNi high entropy alloys

Grain refinement effect on resistance to hydrogen-assisted crack growth in equiatomic CoCrFeNi high-entropy alloy with different H charging conditions

Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating

Microstructure and Intergranular Corrosion Sensibility of FeCoNiCrMn High Entropy Alloy

Influence of hydrogen behaviors on tensile properties of equiatomic FeCrNiMnCo high-entropy alloy

Effect of the grain size on the corrosion behavior of CoCrFeMnNi HEAs in a 0.5 M H2SO4 solution

Corrosion Behaviour of a Non-equiatomic CoCrFeNiMo High-Entropy Alloy in H2S-Containing and H2S-Free Environments

Immunity of Al0.25CoCrFeNi high-entropy alloy to hydrogen embrittlement

Influence of grain refinement via high-pressure torsion on corrosion behavior of medium- and high-entropy alloys CoCrFeNi and CoCrFeMnNi with various chromium contents

Corrosion Resistance of CoCrFeMnNi High Entropy Alloy Compared with 2205 Duplex Stainless Steel in a Simulated Concrete Pore Solution

Near-surface self-resistance hydrogen effect of eutectic high-entropy alloy AlCoCrFeNi2.1

Understanding the physical metallurgy of the CoCrFeMnNi high-entropy alloy: an atomistic simulation study

Effects of Mn addition on mechanical properties, fracture surface, and electrochemical corrosion resistance of CoCrFeNiAl high-entropy alloys

A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy

Effect of hydrogen charging time on hydrogen embrittlement of CoCrFeMnNi high-entropy alloy

Characterization of the oxide film and deuterium permeation behavior of CoCrMnFeNi high entropy alloy oxidized at 550 °C for 24 hours