Flexible Dye-Sensitized Solar Cells with TiO2 Film Deposited on ITO/SiOx/Metal Foil Substrate

Man Gu Kang,Nam -Gyu Park,Kwang Sun Ryu,Soon Ho Chang,Kang-Jin Kim

DOI: https://doi.org/10.1149/ma2005-01/2/92

2006-02-22

ECS Meeting Abstracts

Abstract:Abstract not Available.

What problem does this paper attempt to address?

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Fengxian Xie,Sheng-Jye Cherng,Shunmian Lu,Ya-Huei Chang,Wei E. I. Sha,Shien-Ping Feng,Chih-Ming Chen,Wallace C. H. Choy

DOI: https://doi.org/10.1021/am5006628

IF: 9.5

2014-01-01

ACS Applied Materials & Interfaces

Abstract:In this paper, we demonstrate a simple approach of self-assembled process to form a very smooth and compacted TiO2 underlayer film from ultrafine titanium oxide (TiO2) nanocrystals with dimension of 4 nm for improving the electrical properties and device performances of dye-sensitized solar cells (DSSCs). Because the TiO2 film self-assembles by simply casting the TiO2 on fluorine-doped tin oxide (FTO) substrate, it can save a lot of materials in the process. As compared with control DSSC without the self-assembled TiO2 (SA-TiO2) layer, short-circuit current density (J(sc)) improves from 14.9 mA/cm(2) for control DSSC to 17.3 mA/cm(2) for masked DSSC with the SA-TiO2 layer. With the very smooth SA-TiO2 layer, the power conversion efficiency is enhanced from 8.22% (control) to 9.35% for the DSSCs with mask and from 9.79% (control) to 11.87% for the DSSCs without mask. To explain the improvement, we have studied the optical properties, morphology, and workfunction of the SA-TiO2 layer on FTO substrate as well as the impedance spectrum of DSSCs. Importantly, we find that the SA-TiO2 layers have better morphology, uniformity, and contact with FTO electrode, increased workfunction and optical transmission, as well as reduced charge recombination at the contact of FTO substrate contributing to the improved device performances. Consequently, our results show that the simple self-assembly of TiO2 ultrafine nanocrystals forms a very good electron extraction layer with both improved optical and electrical properties for enhancing performances of DSSCs.
Low-temperature fabrication of nano-porous TiO2 films for flexible dye-sensitized solar cells

Junying Mu,Juan Xu,Qiushui Liangshi,Hongwei Zhu,Zhenxing Chen

DOI: https://doi.org/10.3969/j.issn.1006-3536.2007.03.012

2007-01-01

Abstract:Properties of flexible dye-sensitized solar cells were briefly introduced,and progress of nano-porous TiO2 semiconductor films fabricated under low temperature were summarized.
Flexible Fiber-Type Dye-Sensitized Solar Cells Based on Highly Ordered TiO2 Nanotube Arrays

Jia Liang,Jin Yang,Gengmin Zhang,Wentao Sun

DOI: https://doi.org/10.1016/j.elecom.2013.10.022

IF: 5.443

2013-01-01

Electrochemistry Communications

Abstract:A double-sided, transparent conducting and flexible dye-sensitized solar cell (DSSC) was developed. The device comprised two metal electrodes whereby the working electrode consisted of highly ordered titania (TiO2) nanotube arrays. The maximum conversion efficiency of the DSSC was 5.1% and decreased by 6% under a 90° bending. Surface treatment of the TiO2 nanotube arrays in niobium isopropoxide solution lifted the conversion efficiency to 6.8%.
Performance of Flexible Dye-Sensitized Solar Cell (FDSSC) Using Flexible Substrate at Different Angles Under Back-Illumination Configurations

Izad Syahrul Ariffin Mohd Ismail,Farah Nabilah Shafiee,Mohd Nizar Hamidon,Suhaidi Shafie

DOI: https://doi.org/10.1007/s11664-023-10883-z

IF: 2.1

2024-03-03

Journal of Electronic Materials

Abstract:This research presents the development of a flexible dye-sensitized solar cell (FDSSC) based on titanium (Ti) foil as the photoanode and indium tin oxide-coated polyethylene terephthalate (ITO-PET) as the counter electrode (CE). The FDSSC was fabricated using the doctor blade method with excellent flexibility and mechanical durability. The performance of the FDSSC was evaluated under a solar simulator, analysing its essential photovoltaic parameters. The results showed that the developed FDSSC has high conversion efficiency of 2.03% and good performance stability from 0° to 20° in the angle bending test. In addition, the surface of the photoanode substrate was analysed at varying angles from 0° to 50°. The findings from this research indicate that the FDSSC has the potential to be used in next-generation applications, where it can be mounted in a variety of orientations, including curved or irregular surfaces, which can improve power conversion efficiency. This flexibility allows the FDSSC to capture sunlight from various angles to achieve maximum exposure to solar irradiance throughout the day.

engineering, electrical & electronic,materials science, multidisciplinary,physics, applied
A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Di Wei,Husnu Emrah Unalan,Dongxue Han,Qixian Zhang,Li Niu,Gehan Amaratunga,Tapani Ryhanen

DOI: https://doi.org/10.1088/0957-4484/19/42/424006

IF: 3.5

2008-01-01

Nanotechnology

Abstract:This paper describes a new strategy to make a full solid-state, flexible, dye-sensitized solar cell (DSSC) based on novel ionic liquid gel, organic dye, ZnO nanoparticles and carbon nanotube (CNT) thin film stamped onto a polyethylene terephthalate (PET) substrate. The CNTs serve both as the charge collector and as scaffolds for the growth of ZnO nanoparticles, where the black dye molecules are anchored. It opens up the possibility of developing a continuous roll to roll processing for THE mass production of DSSCs.
Chemical Sintering by Chlorinated Carbon Compounds for Flexible Photoanodes of Dye-Sensitized Photovoltaic Cells

Hyeong Cheol Kang,Kicheon Kicheon Yoo,Md. Mahbubur Rahman,Senthilkumar Muthu,Jun Hwan Jang,Ashok Kumar Kaliamurthy,Jae-Joon Lee

DOI: https://doi.org/10.1039/d3se01547e

IF: 6.813

2024-01-26

Sustainable Energy & Fuels

Abstract:Novel binary solvent mixtures of chlorinated carbon compounds (CCs = CCl 4 , CHCl 3 , and C 2 Cl 4 ) and 1-octanol are used to prepare pastes of TiO 2 nanoparticles, which facilitate the formation of stable and thick TiO 2 mesoporous films for photoanode of dye-sensitized solar cells (DSSCs). Novel binary solvent mixtures of chlorinated carbon compounds (CCs = CCl 4 , CHCl 3 , and C 2 Cl 4 ) and 1-octanol are used to prepare pastes of TiO 2 nanoparticles (NPs), which facilitate the formation of stable and thick TiO 2 mesoporous films for photoanode of dye-sensitized solar cells (DSSCs). CCs and 1-octanol readily form a complex, leading to enhanced interparticle connectivity within TiO 2 NPs through hydrogen bonding interactions. The as-prepared chemically sintered TiO 2 films exhibit high porosity, homogeneity, and a strong interparticle network for improved mechanical stability. The highest power conversion efficiency (PCE) of 7.0 and 5.8% is achieved using C 2 Cl 4 for fluorine-doped tin oxide (FTO)-based rigid-type DSSCs and flexible-photoanode (indium-doped tin oxide (ITO)-coated polyethylene naphthalate (ITO/PEN)) based DSSCs, respectively, under 1-sun illumination conditions. Furthermore, the optimized device exhibits a significantly high PCE of 19.9 % under indoor low-intensity light conditions.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Highly efficient and completely flexible fiber-shaped dye-sensitized solar cell based on TiO 2 nanotube array

Zhibin Lv,Jiefeng Yu,Hongwei Wu,Jian Shang,Dan Wang,Shaocong Hou,Yongping Fu,Kai Wu,Dechun Zou

DOI: https://doi.org/10.1039/c2nr11532h

IF: 6.7

2012-01-01

Nanoscale

Abstract:A type of highly efficient completely flexible fiber-shaped solar cell based on TiO2 nanotube array is successfully prepared. Under air mass 1.5G (100 mW cm(-2)) illumination conditions, the photoelectric conversion efficiency of the solar cell approaches 7%, the highest among all fiber-shaped cells based on TiO2 nanotube arrays and the first completely flexible fiber-shaped DSSC. The fiber-shaped solar cell demonstrates good flexibility, which makes it suitable for modularization using weaving technologies.
Flexible dye-sensitized solar cells assisted with lead-free perovskite halide

Xiaojuan Fan

DOI: https://doi.org/10.1557/s43578-022-00501-9

IF: 2.7

2022-02-03

Journal of Materials Research

Abstract:Dye-sensitized solar cells (DSSCs) have shown promising alternative to Si-based counterparts due to low-cost, abundant raw materials, and non-vacuum processing. Here, we report a solution-based process to create flexible DSSCs on aluminum foils. Mesoporous TiO2 electrode was directly deposited on Al foil through spin casting. After post-thermal annealing, the resultant samples render optical smooth, crack-free, and large nanocrystalline thin films. The as-prepared double-layer porous TiO2 thin film was incorporated with a porphyrin dye followed by a perovskite halide salt Cs2SnI6, as the hole transport material, replacing liquid electrolyte. A transparent conducting plastic sheet was used as the cathodic electrode to complete the solar cell construction. Samples were characterized using X-ray diffraction, SEM, AFM, UV–Vis spectrometer, and current–voltage measurements. A photo-electricity conversion efficiency of 3.74% has been achieved that potentially makes the possibility of scaling up fabrication of all-solid-state flexible solar cells.Graphical abstractThis manuscript presents a convenient chemical solution method to grow mesoporous titania thin films on flexible Al foil substrates. Polymer template mixed in metal oxide precursor was spun on substrates followed by high temperature post-annealing process. The as-prepared samples show optical smooth surface, uniform nanocrystalline structure, crack-free, and large size thin films. Using the obtained mesoporous TiO2 thin films combining with porphyrin dye and double-perovskite structure Cs2SnI6, flexible DSSCs were successfully constructed.

materials science, multidisciplinary
Flexible Solar Cells: Low‐Temperature‐Deposited TiO 2 Nanopillars for Efficient and Flexible Perovskite Solar Cells (Adv. Mater. Interfaces 3/2021)

Zhongwei Wu,Peng Li,Jie Zhao,Ting Xiao,Hong Hu,Peng Sun,Zehan Wu,Jianhua Hao,Chunlin Sun,Haoli Zhang,Zhifeng Huang,Zijian Zheng

DOI: https://doi.org/10.1002/admi.202170016

IF: 5.4

2021-02-01

Advanced Materials Interfaces

Abstract:Sunlight can be converted to electricity via solar cells, with which then light can be generated the other way around. In this regard, skyscrapers performing light show during night or the bright Karst landscape under the ground are exemplified, echoing the geometry of the TiO2 nanopillars which are fabricated via a low‐temperature dry process and work as the efficient electron‐transporting layer in flexible perovskite solar cells. More details can be found in article number <a href="https://doi.org/10.1002/admi.202001512">2001512</a> by Zhifeng Huang, Zijian Zheng, and co‐workers. 

materials science, multidisciplinary,chemistry
Selective Laser Sintering Of Tio2 Nanoparticle Film On Plastic Conductive Substrate For Highly Efficient Flexible Dye-Sensitized Solar Cell Application

liqun ming,huan yang,wenjun zhang,xianwei zeng,dehua xiong,zhen xu,huan wang,wei chen,xiaobao xu,mingkui wang,jun duan,yibing cheng,jie zhang,qiaoliang bao,zhanhua wei,shihe yang

DOI: https://doi.org/10.1039/c3ta14210h

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:In this paper, we report a novel selective laser sintering of TiO2 nanoparticle (Degussa P25) film on plastic conductive substrates for highly efficient flexible dye-sensitized solar cell (DSC) applications. The so-called "selective sintering" means that the absorbed laser energy can effectively promote the electrical contacts between the TiO2 nanoparticles, but does not cause damage to the plastic conductive substrate. The choice of the near-infrared (wavelength = 1064 nm) laser source is critical for the effectiveness of the laser sintering. The laser sintering technology can effectively decrease electron transport resistance and increase recombination resistance of the TiO2 nanoparticle film characterized by electrochemical impedance spectroscopy and transient photovoltage/photocurrent decay measurements, resulting in much improved charge collection efficiency. Thus, compared to the reference sample, the laser sintered film has achieved an improved short-circuit current density from 9.2 to 10.4 mA cm(-2), fill factor from 0.71 to 0.77, and solar conversion efficiency from 4.5% to 5.7%. The fast and effective selective laser sintering technique has great potential to be integrated into scalable roll-to-roll manufacturing of highly efficient flexible DSCs.
OPTIMIZATION OF FABRICATION PARAMETERS OF FLEXIBLE DYE-SENSITIZED SOLAR CELLS

赵晓冲,杨盼,林红,李鑫,许晨阳,李建保

DOI: https://doi.org/10.14062/j.issn.0454-5648.2010.01.026

2010-01-01

Abstract:A binder-free paste with a graded structure,which was composed of titania (TiO2) nano-particles synthesized by hydrothermal method,titania particles named P25 and scattering large particles,was prepared.The TiO2 photoanode film was prepared on a conductive indium-tin oxide-coated polyethylene naphthalate plastic sheet in a temperature range of 120-150 ℃ by a doctor-blade method.The Pt counter electrode was prepared by an ion sputtering method.The effects of sputtering time of Pt counter electrode,heat-treatment temperature,thickness of TiO2 film and the acid content of the paste on the photovoltaic performance of the flexible dye-sensitized solar cell (DSC) fabricated from the above materials were discussed.The results show that the flexible DSC has the highest light-to-energy conversion efficiency of 4.05% when the Pt sputtering time is 30 s,the acid content is 0.05mol/L,the heat-treatment temperature is 150℃ and the film thickness is 10.5μm.
Research on solar cell preparation technology for cutting-edge technology

Zhuoran Ji

DOI: https://doi.org/10.62051/mzgkvm32

2024-08-06

Abstract:Flexible dye-sensitized solar cells are highly valued as a practical technology with low production costs. In this paper, we study flexible dye-sensitized solar cells consisting of nanocrystalline TiO2 thin-film electrodes based on titanium metal and counter electrodes based on conductive coated polymers. In order to improve the photoelectric conversion efficiency, nanocrystalline TiO2 film electrodes and TiO2 nanotube film electrodes based on titanium metal and TiO2 nanotube film electrodes are prepared by DC low-field electrophoretic deposition, electrochemical anodizing and screen printing under DC and pulse voltages combined with high-temperature sintering methods; and platinum-carrying counter electrodes and carbon counter electrodes based on conductive coated polymers are prepared by low-temperature techniques, such as constant-current electrochemical deposition and chemical reduction. The mechanisms and characteristics of different preparation methods and optimization techniques are analyzed and discussed, and the performances of nanocrystalline TiO2 thin film electrodes and counter electrodes prepared by different methods are compared. On this basis, the all-flexible solar cell is developed, and the maximum photoelectric conversion efficiency reaches 6.74%.
A Numerical Simulation and Impedance Study of the Electron Transport and Recombination in Binder-Free TiO2 Film for Flexible Dye-Sensitized Solar Cells

Xin Li,Hong Lin,Jianbao Li,Xiaxi Li,Bai Cui,Luozheng Zhang

DOI: https://doi.org/10.1021/jp800023z

2008-01-01

Abstract:A mesoporous TiO2 film consisting of different size nanocrystal particles without any organic binder was prepared on a conductive indium-tin oxide (ITO)-coated polyethylene naphthalate (PEN) plastic sheet by the doctor-blade method to fabricate flexible dye-sensitized photoanodes at 120 degrees C. It was found that the structure of the film affected the photovoltaic performance of the photoanode greatly. The mechanism of such effects was investigated both by simulation of porosity, surface area, average pore size, and electron diffusion coefficient of the mesoporous TiO2 film, and by impedance study for the electron transport and recombination in a dye-sensitized solar cell (DSC). The results showed that the electron transport and recombination dominated the operation of the DSC with such flexible photoanodes. The optimum photoanode was achieved, and the largest conversion efficiency obtained was 3.93%.
Improvement in the photoelectric conversion efficiency for the flexible fibrous dye-sensitized solar cells

Gentian Yue,Xianqing Liu,Ying Chen,Jinghao Huo,Haiwu Zheng

DOI: https://doi.org/10.1186/s11671-018-2601-7

2018-06-28

Nanoscale Research Letters

Abstract:A dye-sensitized and flexible TiO2 fiber with multilayer structure was prepared by using brush method as the photoanode in the efficient flexible fibrous dye-sensitized solar cells (FFDSSCs) to avoid electronic recombination and improve the electronic capture efficiency. The composite Pt counter electrode, preparation from the surface modification of the electrodeposited Pt wire by using a simple one-step thermal decomposition approach of H2PtCl6 isopropanol and n-butyl alcohol (volume ratio = 1:1) solution, provided a significant improvement in electrocatalytic activity, which was confirmed by extensive electrochemical tests. The FFDSSC assembled with the fiber-shaped TiO2 photoanode and the composite Pt counter electrode achieves an enhanced photoelectric conversion efficiency of 6.35%, higher than that of the FFDSSC with monolayer fibrous TiO2 photoanode and electrodeposited Pt wire counter electrode. More importantly, the photoelectric conversion efficiency of 6.35% is comparable to that of the FFDSSC based on the pure Pt wire counter electrode (6.32%). The FFDSSC with high elasticity, flexibility, and stretchability can adapt to complex mechanical deformations, which is of great significance for the development of wearable electronics in the future.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Electrophoretic deposition of graphene-TiO2 hierarchical spheres onto Ti thread for flexible fiber-shaped dye-sensitized solar cells

Zhengdao Li,Yong Zhou,Yuhan Yang,Hui Dai

DOI: https://doi.org/10.1016/j.matdes.2016.05.060

IF: 9.417

2016-01-01

Materials & Design

Abstract:A multiple electrophoretic deposition (EPD) technique is developed to deposit complicated hierarchical TiO2 spheres and graphene-TiO2 spheres composite onto flexible Ti thread as working electrode of fiber-shaped dye-sensitized solar cells (F-DSSCs). Experimental results show that this multiple EPD technique cannot only fill up the cracks coming from drying the previous single EPD film but also adjust the thickness of films. More importantly, this approach is adaptable to build both single material and more complicated composite on the fiber-shaped substrates. With this technique, high quality graphene-TiO2 film is acquired on flexible Ti thread and F-DSSCs based on 0.3wt.% graphene-TiO2 hierarchical spheres show a remarkable enhancement in conversion efficiency (2.68%) compared to that of bare TiO2 hierarchical spheres (1.50%). Further TiCl4 solution treatment of 0.3wt.% graphene-TiO2 photoanode achieves device efficiency of 3.26% resulting from the improved connectivity between the particles in the film. Our work may establish an industrial procedure to produce complex hierarchical architecture on the high curvature surface of the flexible substrates with broader range of practical application.
Well-Aligned Tio2 Nanorod Arrays Prepared by Dc Reactive Magnetron Sputtering for Flexible Dye-Sensitized Solar Cells

Jun Lu,Shaohong Xu,Yibo Du,Lin,Yanli Wang,Dannong He

DOI: https://doi.org/10.1016/j.matlet.2016.08.151

IF: 3

2017-01-01

Materials Letters

Abstract:Flexible Dye-Sensitized Solar Cells (DSSCs) have received a lot of attention because of its advantages in cost-effectiveness, flexibility, lightweight for wearable electronics and other versatile applications. Plastic substrates treated at low temperature usually have problems in material crystallinity and fragile characteristic. Here, we demonstrate an effective dc reactive magnetron sputtering strategy to fabricate a growing well-aligned TiO2 nanorod arrays for flexible dye-sensitized solar cells with superior photovoltaic performance. By controlling the length of TiO2 nanorod arrays, a large fill factor of 0.8 and PCE of 5.3% have been achieved, compared with 1.2% from traditional TiO2 nanoparticles by a low-temperature technique.
Low‐Temperature‐Deposited TiO 2 Nanopillars for Efficient and Flexible Perovskite Solar Cells

Zhongwei Wu,Peng Li,Jie Zhao,Ting Xiao,Hong Hu,Peng Sun,Zehan Wu,Jianhua Hao,Chunlin Sun,Haoli Zhang,Zhifeng Huang,Zijian Zheng

DOI: https://doi.org/10.1002/admi.202001512

IF: 5.4

2020-11-30

Advanced Materials Interfaces

Abstract:Organometal halide perovskite solar cells (PSCs) are promisingly applied to flexible solar cells because of the high power conversion efficiency (PCE) and intrinsic softness of perovskite materials. In the most efficient PSCs, mesoporous TiO2 generally functions as the electron transporting layer. However, the mesoporous TiO2 is typically generated through high‐temperature thermal annealing that is not suitable for producing flexible PSCs. In this work, TiO2 nanopillar arrays are directly deposited on flexible substrates using glancing angle deposition at low substrate temperature. The TiO2 nanopillars strongly adhere to the flexible substrates, improving light harvesting in the perovskite layers, facilitating electron extraction and transportation, and enhancing the mechanical flexibility of the PSCs. The flexible PSCs hybridized with the TiO2 nanopillars show a PCE as high as 13.3% and excellent photovoltaic stability after 500 cycles of bending at a small radius of curvature.

materials science, multidisciplinary,chemistry
Study on a stretchable, fiber-shaped, and TiO2 nanowire array-based dye-sensitized solar cell with electrochemical impedance spectroscopy method

Guicheng Liu,Hui Wang,Manxiang Wang,Wenbing Liu,Ryanda Enggar Anugrah Ardhi,Dechun Zou,Joong Kee Lee

DOI: https://doi.org/10.1016/j.electacta.2018.02.075

IF: 6.6

2018-03-01

Electrochimica Acta

Abstract:A spring-like Ti@TiO2 nanowire array wire has been introduced into a stretchable fiber-shaped dye-sensitized solar cell (FDSSC) as a photoanode to achieve high flexibility and elasticity in this paper. Given the TiO2 layer, which was prepared by a hydrothermal reaction in the optimized NaOH concentration of 2.5 mol L−1, with a 1D structure and high adhesion between the TiO2 nanowire array and the Ti wire substrate, the novel FDSSC still possesses photoelectric conversion efficiency retention rates of approximately 97.00% and 95.95% after bending to a radius of 1.0 cm and stretching to 100% strain, respectively. EIS result shows the degradation mechanism of the FDSSC photoelectric performance: the bending test leads to more terrible electron combination; the stretching operation increases the internal resistance and charge-transfer resistance at the counter electrode. Moreover, it's worth noting that, this is the first time to show a 100%-stretching degree in the FDSSC research field so far.

electrochemistry
Transparent conductive oxide-less, flexible, and highly efficient dye-sensitized solar cells with commercialized carbon fiber as the counter electrode

Shaocong Hou,Xin Cai,Yongping Fu,Zhibin Lv,Dan Wang,Hongwei Wu,Chao Zhang,Zengze Chu,Dechun Zou

DOI: https://doi.org/10.1039/c1jm12056e

2011-01-01

Journal of Materials Chemistry

Abstract:TCO-less, flexible and highly efficient dye-sensitized solar cells are fabricated with commercialized carbon fiber as the counter electrode. 5.8% of conversion efficiency was obtained via modification of the conductivity and catalytic performance of carbon fiber.
Oriented Mesoporous Tio2 Film As Photoanode for Dye-Sensitized Solar Cells

Wenguang Cheng,Wenzhe Li,Shaofei Ji,Dandan Yang,Liduo Wang,Xiaozhong Qu,Chengliang Zhang,Fuxin Liang,Qian Wang,Jiaoli Li,Zhenzhong Yang

DOI: https://doi.org/10.1039/c3ta11636k

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:Flexible bicontinuous mesostructured polymer/inorganic composite membranes was prepared by undertaking co-assembly of surfactants and inorganic sol-gel processes inside pores of a preformed porous polymer membrane. After burning off the organic component, the oriented mesoporous TiO2 film was obtained. The three dimensional porous structure was carefully investigated, and a DSSC was fabricated using the obtained TiO2 film as photoanode. The method of incorporating surfactant induced self-organizing sol-gel process and a certain nanoporous template was proved to be a useful technique to create different kinds of nano-/mesoporous structures.

Flexible Dye-Sensitized Solar Cells with TiO2 Film Deposited on ITO/SiOx/Metal Foil Substrate

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Low-temperature fabrication of nano-porous TiO2 films for flexible dye-sensitized solar cells

Flexible Fiber-Type Dye-Sensitized Solar Cells Based on Highly Ordered TiO2 Nanotube Arrays

Performance of Flexible Dye-Sensitized Solar Cell (FDSSC) Using Flexible Substrate at Different Angles Under Back-Illumination Configurations

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Chemical Sintering by Chlorinated Carbon Compounds for Flexible Photoanodes of Dye-Sensitized Photovoltaic Cells

Highly efficient and completely flexible fiber-shaped dye-sensitized solar cell based on TiO 2 nanotube array

Flexible dye-sensitized solar cells assisted with lead-free perovskite halide

Flexible Solar Cells: Low‐Temperature‐Deposited TiO 2 Nanopillars for Efficient and Flexible Perovskite Solar Cells (Adv. Mater. Interfaces 3/2021)

Selective Laser Sintering Of Tio2 Nanoparticle Film On Plastic Conductive Substrate For Highly Efficient Flexible Dye-Sensitized Solar Cell Application

OPTIMIZATION OF FABRICATION PARAMETERS OF FLEXIBLE DYE-SENSITIZED SOLAR CELLS

Research on solar cell preparation technology for cutting-edge technology

A Numerical Simulation and Impedance Study of the Electron Transport and Recombination in Binder-Free TiO2 Film for Flexible Dye-Sensitized Solar Cells

Improvement in the photoelectric conversion efficiency for the flexible fibrous dye-sensitized solar cells

Electrophoretic deposition of graphene-TiO2 hierarchical spheres onto Ti thread for flexible fiber-shaped dye-sensitized solar cells

Well-Aligned Tio2 Nanorod Arrays Prepared by Dc Reactive Magnetron Sputtering for Flexible Dye-Sensitized Solar Cells

Low‐Temperature‐Deposited TiO 2 Nanopillars for Efficient and Flexible Perovskite Solar Cells

Study on a stretchable, fiber-shaped, and TiO2 nanowire array-based dye-sensitized solar cell with electrochemical impedance spectroscopy method

Transparent conductive oxide-less, flexible, and highly efficient dye-sensitized solar cells with commercialized carbon fiber as the counter electrode

Oriented Mesoporous Tio2 Film As Photoanode for Dye-Sensitized Solar Cells