Abstract:As the increasingly serious problems of fossil energy depletion and environmental pollutions,exploiting the clean renewable energy resources has become the urgency.Solar energy is one of the important renewable energy resources,and its effective utilization will exert a great influence on solving energy and environmental problems.Solar cells,which convert solar energy to electrical energy,represent a promising candidate to use renewable energies.In the past 20 years,the dye-sensitized solar cells (DSSCs) have drawn much attention from both academia and industry due to its low cost,environment-friendliness and high efficiency.It was reported that the efficiency of traditional DSSCs using fluorinedoped tin oxide (FTO) glass as the working electrode substrate exceeded 12％ (100 mW/cm2).But rigid flat-shaped DSSCs are unfavorable for installation,transportation,and application as a result of their extreme brittleness and heaviness.Therefore,the development of flexible cells has become a challenge.Fiber-shaped dye-sensitized solar cells (F-DSSCs) are flexible DSSCs that fabricated by assembling the photovoltaic function on the surface of fiber-shaped conductive substrate with high curvature structure.The fiber cells show unique and promising advantages:(1) Since they have a three-dimensional structure and very low dependence on incident light angle,they can catch more photons from all directions and gather diffused/reflected light to improve the power output of the cell.(2) The fiber cell has smaller package area ratio.A larger area cell can be assembled by simply increasing the length of the cell.The characteristic of F-DSSCs is that when the cells go up to some extent,the package area of the cell remains basically unchanged,which has a great significance in maintaining the stability of F-DSSCs with larger size.(3) F-DSSCs can directly adopt traditional preparation technology,even under milder processing conditions,such as low temperature.(4) F-DSSCs are lightweight so that they are easy to be woven into clothes or integrated into other structures by existing textile techniques,which enables applications in electronic textiles and various complex devices.Therefore,extensive attention has recently been paid to develop F-DSSCs photovoltaic devices,and the maximum energy conversion efficiencies have exceeded 8％.However,a few critical scientific issues still need to be addressed.Firstly,it is necessary to make further and deeper research on solid-state electrolytes to improve the stability of F-DSSCs.Secondly,more efforts are required to explore new photoactive materials and electrodes.Meanwhile,optimizing the F-DSSCs structures and developing the scale-up technologies will enhance the conversion efficiencies which are currently much lower than traditional planar DSSCs counterparts.Thirdly,F-DSSCs may be integrated with other energy storage parts to produce more efficient devices.To accomplish this,much more efforts should be made to optimize the structure and improve the performance of the integrated fiber.In this review,the basic structure and working principle of F-DSSCs are briefly introduced.The related researches in recent years are reviewed in detail,including working electrodes,counter electrodes and electrolytes.At the same time,future development trends are forecasted.

Performance of Flexible Dye-Sensitized Solar Cell (FDSSC) Using Flexible Substrate at Different Angles Under Back-Illumination Configurations

Efficient flexible dye-sensitized solar cells from rear illumination based on different morphologies of titanium dioxide photoanode

Substrate Diameter-Dependent Photovoltaic Performance of Flexible Fiber-Type Dye-Sensitized Solar Cells with TiO2 Nanoparticle/TiO2 Nanotube Array Photoanodes

Improvement in the photoelectric conversion efficiency for the flexible fibrous dye-sensitized solar cells

A review on flexible dye-sensitized solar cells as new sustainable energy resources

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

High efficiency flexible fiber-type dye-sensitized solar cells with multi-working electrodes

Flexible Fiber-Type Dye-Sensitized Solar Cells Based on Highly Ordered TiO2 Nanotube Arrays

Flexible dye-sensitized solar cells assisted with lead-free perovskite halide

Novel design for flexible quasi-solid-state dye-sensitized solar cells based on heat-resistant glass paper

Study on a stretchable, fiber-shaped, and TiO2 nanowire array-based dye-sensitized solar cell with electrochemical impedance spectroscopy method

Highly-flexible, low-cost, all stainless steel mesh-based dye-sensitized solar cells

Highly efficient long thin-film fiber-shaped dye sensitized solar cells based on a fully organic sensitizer

OPTIMIZATION OF FABRICATION PARAMETERS OF FLEXIBLE DYE-SENSITIZED SOLAR CELLS

High-efficiency flexible dye-sensitized solar cells fabricated by a novel friction-transfer technique

Titanium Dioxide (TiO2) Sensitized Zinc Oxide (ZnO)/Conducting Polymer Nanocomposites for Improving Performance of Hybrid Flexible Solar Cells

Effects of Thickness of TiO2 Graded Film on the Photovoltaic Performance for Flexible Dye Sensitized Solar Cells

Vertically Aligned Carbon Nanotubes/Graphene Hybrid Electrode As A Tco- And Pt-Free Flexible Cathode For Application In Solar Cells

Research Progress on Fiber-Shaped Dye-Sensitized Solar Cells

Electrochemical and power conversion performance of different counter electrode materials for flexible dye-sensitized solar cells