Abstract:Fabrication of the composite polymer electrolyte films via solution casting approach. A detailed account of the poly(vinylidene difluoride‐co‐hexafluoropropylene) (PVDF‐HFP)/succinonitrile (SN)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based solid polymer electrolytes (SPEs) of various compositions is reported. SN is incorporated as plasticizer, while LiTFSI is employed as the source of lithium ions. Fourier transfer infrared (FTIR) spectroscopy reveals the formation of polar and electroactive γ crystal phase by PVDF in pristine PVDF‐HFP and the prepared SPE films. FTIR further confirms the interaction between the host polymer and the salt and between the salt and the plasticizer. The interaction between the salt and plasticizer suggests that SN not only offers the plasticization effect but also facilitates salt dissociation. The ion conductivity increases with increasing salt content up to 20 wt% but beyond that concentration a decline in ion conductivity is observed, which could be attributed to the ion pair association or cluster formation due to the excess salt concentration that reduces the availability of free ions and ultimately leads to the reduction in ion conductivity. After including SN in the SPE formulation, electrochemical impedance spectroscopy reveals a substantial increase in room temperature ion conductivity of the SPE from ~1.08 × 10−5 S cm−1 for pristine SPE with 20 wt% salt to ~2.7 × 10−4 S cm−1 for plasticized SPE with 40 wt% SN and 20 wt% salt. This is attributed to the plasticizing effect of SN that enhances ion mobility through the matrix and to the increased charge carrier concentration (SN facilities salt dissociation). The fabricated SPEs exhibit a significant enhancement in ion conductivity with increasing temperature and the maximum ion conductivity of 1.1 × 10−3 S cm−1 is attained at 393 K by plasticized SPE with 40 wt% SN content. The ion conductivity of all the prepared SPEs follows the temperature dependent Arrhenius behavior, suggesting the thermally activated ion hopping mechanism of ionic conduction. Further, the plasticized SPEs display near unity ion transference number indicating the predominance of the ionic mode of conduction. The dielectric and electric modulus analysis reveal a faster relaxation phenomenon and hence higher ion conductivity of the prepared SPEs with increasing salt and plasticizer content.

Fabrication and characterization of Zn-ion-conducting solid polymer electrolyte films based on PVdF-HFP/Zn(Tf)2 complex system

A Novel Phosphorus-Containing Pyridinium Porous Organic Framework with Flame Retardancy for Enhancing Efficiency and Safety of Solid-State Polymer Electrolyte

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

Stable Polymer Electrolytes Based on Polyether-Grafted Zno Nanoparticles for All-Solid-State Lithium Batteries

Effect of ZnO Nanofiller on Structural and Electrochemical Performance Improvement of Solid Polymer Electrolytes Based on Polyvinyl Alcohol-Cellulose Acetate-Potassium Carbonate Composites

Self-Healing Solid Polymer Electrolyte With High Ion Conductivity And Super Stretchability For All-Solid Zinc-Ion Batteries

Heteroleptic Coordination Polymer Electrolytes Initiated by Lewis-Acidic Eutectics for Solid Zinc–Metal Batteries

Ionic Liquid-Incorporated Zn-Ion Conducting Polymer Electrolyte Membranes

Electrical conductivity and dielectric relaxation behaviour of PEO/PVdF-based solid polymer blend electrolytes for zinc battery applications

Polymeric Single Ion Conductors with Enhanced Side Chains Motion for High‐performance Solid Zinc Ion Batteries

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Building Up Ion-Conduction Pathways in Solid Polymer Electrolytes Through Surface and Pore Functionalization of PVDF Porous Membranes with Ionic Conductors

Structure, thermal and electrical properties of PVDF-HFP/LiBOB solid polymer electrolyte

A "Polymer‐in‐Salt" Solid Electrolyte Enabled by Fast Phase Transition Route for Stable Zn Batteries

Crystal‐Facet Manipulation and Interface Regulation via TMP‐Modulated Solid Polymer Electrolytes toward High‐Performance Zn Metal Batteries

Zwitterionic Cellulose‐based Polymer Electrolyte Enabled by Aqueous Solution Casting for High‐performance Solid‐state Batteries

Enhancing the ion transportation on PVDF‐HFP and PMMA based solid polymer electrolyte by fusing Co3O4 and NiO NPs for energy storage applications

Polymer Chain‐Guided Ion Transport in Aqueous Electrolytes of Zn‐Ion Batteries

Crosslinked polytetrahydrofuran-based solid-state electrolytes with improved mechanical stability and electrochemical performance

An Sodium Bis(trifluoromethanesulfonyl)imide-based Polymer Electrolyte for Solid-State Sodium Batteries

Studies on the Ion States and Ion Transport Mechanism of Solid Polymer Electrolytes