Abstract:Fabrication of the composite polymer electrolyte films via solution casting approach. A detailed account of the poly(vinylidene difluoride‐co‐hexafluoropropylene) (PVDF‐HFP)/succinonitrile (SN)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based solid polymer electrolytes (SPEs) of various compositions is reported. SN is incorporated as plasticizer, while LiTFSI is employed as the source of lithium ions. Fourier transfer infrared (FTIR) spectroscopy reveals the formation of polar and electroactive γ crystal phase by PVDF in pristine PVDF‐HFP and the prepared SPE films. FTIR further confirms the interaction between the host polymer and the salt and between the salt and the plasticizer. The interaction between the salt and plasticizer suggests that SN not only offers the plasticization effect but also facilitates salt dissociation. The ion conductivity increases with increasing salt content up to 20 wt% but beyond that concentration a decline in ion conductivity is observed, which could be attributed to the ion pair association or cluster formation due to the excess salt concentration that reduces the availability of free ions and ultimately leads to the reduction in ion conductivity. After including SN in the SPE formulation, electrochemical impedance spectroscopy reveals a substantial increase in room temperature ion conductivity of the SPE from ~1.08 × 10−5 S cm−1 for pristine SPE with 20 wt% salt to ~2.7 × 10−4 S cm−1 for plasticized SPE with 40 wt% SN and 20 wt% salt. This is attributed to the plasticizing effect of SN that enhances ion mobility through the matrix and to the increased charge carrier concentration (SN facilities salt dissociation). The fabricated SPEs exhibit a significant enhancement in ion conductivity with increasing temperature and the maximum ion conductivity of 1.1 × 10−3 S cm−1 is attained at 393 K by plasticized SPE with 40 wt% SN content. The ion conductivity of all the prepared SPEs follows the temperature dependent Arrhenius behavior, suggesting the thermally activated ion hopping mechanism of ionic conduction. Further, the plasticized SPEs display near unity ion transference number indicating the predominance of the ionic mode of conduction. The dielectric and electric modulus analysis reveal a faster relaxation phenomenon and hence higher ion conductivity of the prepared SPEs with increasing salt and plasticizer content.

Structure, thermal and electrical properties of PVDF-HFP/LiBOB solid polymer electrolyte

The Effect of LiBOB Addition on Solid Polymer Electrolyte (SPE) Production based PVDF-HFP/TiO2/LiTFSI on Ionic Conductivity for Lithium-Ion Battery Applications

Manufacture of Solid Polymer Electrolyte (SPE) Based on PVDF HFP-LiBOB

PEO/PVA/LiOH Solid Polymer Electrolyte Prepared via Ultrasound-assisted Solution Cast Method

Lithium Bis(fluorosulfonyl)imide/poly(ethylene Oxide) Polymer Electrolyte

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

Effects of 1-hexyl-1-methylimidazolium iodide ionic liquid to poly(vinyl alcohol)–based solid polymer electrolyte

Electrical Properties of Lithium-Ion Conducting Poly (Vinylidene Fluoride-Co-Hexafluoropropylene) (PVDF-HFP)/Polyvinylpyrrolidone (PVP) Solid Polymer Electrolyte

Lithium (fluorosulfonyl)(pentafluoroethylsulfonyl)imide/poly (ethylene Oxide) Polymer Electrolyte: Physical and Electrochemical Properties

Preparation and Characterization of Solid Polymer Electrolytes Based on PHEMO and PVDF-HFP

Solid Polymer Electrolyte Comprised of Lithium Salt/ether Functionalized Ammonium-Based Polymeric Ionic Liquid with Bis(fluorosulfonyl)imide

Preparation and Characterization of PVDF-HFP/MG49 Based Polymer Blend Electrolyte

Preparation of Sphere-like Fast Ion Conductor Li0.1CexCa0.9-XTiO3 and Its Application in Solid Polymer Electrolyte

Formatted PVDF in lamellar composite solid electrolyte for solid-state lithium metal battery

Ionic solid-like conductor-assisted polymer electrolytes for solid-state lithium metal batteries

Boosting the performance of poly(ethylene oxide)‐based solid polymer electrolytes by blending with poly(vinylidene fluoride‐co‐hexafluoropropylene) for solid‐state lithium‐ion batteries

High Performance Ternary Solid Polymer Electrolytes Based on High Dielectric Poly(vinylidene fluoride) Copolymers for Solid State Lithium-Ion Batteries

Modified Poly(vinylidene fluoride- co -hexafluoropropylene) Polymer Electrolyte for Enhanced Stability and Polymer Degradation Inhibition toward the Li Metal Anode

Enabling Polymeric Ionic Liquid Electrolytes with High Ambient Ionic Conductivity by Polymer Chain Regulation

Composition and Structure Design of Poly(vinylidene fluoride)‐Based Solid Polymer Electrolytes for Lithium Batteries

Optimized nano-perovskite lanthanum cuprate decorated PVA based solid polymer electrolyte